Wookyung Lee

Mr. Wookyung Lee


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 May 2025 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JKJiwon Kim
Jiwon Kim
IHInkook Hwang
Inkook Hwang
BKByungwook Kim
Byungwook Kim
WLWookyung Lee
Wookyung Lee
JSJuha Song
Juha Song
CYChang-Bun Yoon
Chang-Bun Yoon
Dynamic random-access memory (DRAM) is a vital component in modern computing systems. Enhancing memory performance requires maximizing capacitor capacitance within DRAM cells, which is achieved using high-k dielectric materials deposited as thin, uniform films via atomic layer deposition (ALD). Precise film deposition that minimizes electronic defects caused by charged vacancies is essential for reducing leakage current and ensuring high dielectric strength. In this study, we fabricated metal–insulator–metal (MIM) capacitors in high-aspect-ratio trench structures using remote plasma ALD (RP-ALD) and direct plasma ALD (DP-ALD). The trenches, etched into silicon, featured a 7:1 aspect ratio, 76 nm pitch, and 38 nm critical dimension. We evaluated the electrical characteristics of HfO2-based capacitors with TiN top and bottom electrodes, focusing on leakage current density and equivalent oxide thickness. Capacitance–voltage analysis and X-ray photoelectron spectroscopy (XPS) revealed that RP-ALD effectively suppressed plasma-induced damage, reducing defect density and leakage current. While DP-ALD offered excellent film properties, it suffered from degraded lateral uniformity due to direct plasma exposure. Given its superior lateral uniformity, lower leakage, and defect suppression, RP-ALD shows strong potential for improving DRAM capacitor performance and serves as a promising alternative to the currently adopted thermal ALD process.

19 June 2026 in Micromachines
Verified
Journal Article
Open access
PDF file
IHInkook Hwang
Inkook Hwang
HNHyeon Wu Nam
Hyeon Wu Nam
JKJiwon Kim
Jiwon Kim
BKByungwook Kim
Byungwook Kim
YJYongwoon Jang
Yongwoon Jang
CYChang-Bun Yoon
Chang-Bun Yoon
In this study, charge-trapping memory (CTM) transistors were developed using indium gallium zinc oxide (IGZO) as the oxide semiconductor channel and high-k HfO2 as the charge-trapping layer, aiming for next-generation nonvolatile memory applications. To evaluate the impact of plasma exposure on film quality and device performance, HfO2 thin films were deposited via atomic layer deposition (ALD) using both direct plasma (DP) and remote plasma (RP) modes. Post-deposition annealing (PDA) was applied to the IGZO and HfO2 layers, with experiments conducted at various annealing temperatures to enhance the interfacial stability between the HfO2 layer and the IGZO channel. Electrical characterization results demonstrated that the RP-processed devices exhibited a wider memory window, reduced gate leakage current, and improved threshold voltage stability compared with the DP-processed devices. Thermal treatment effectively reduced the interfacial defect density and enhanced the crystallinity at the dielectric–channel interface. These findings underscore that the selection of the plasma process and annealing conditions is critical in determining the electrical characteristics and reliability of oxide semiconductor-based CTM devices.

27 January 2026 in Inorganics
Verified
Journal Article
Open access
PDF file
YKYoungsun Ko
Youngsun Ko
HLHanbyul Lee
Hanbyul Lee
WLWookyung Lee
Wookyung Lee
JCJaeseung Choi
Jaeseung Choi
JAJungkeun Ahn
Jungkeun Ahn
CYChang-Bun Yoon
Chang-Bun Yoon
With the expanding electric vehicle market, there is increasing demand for improved battery safety and fast-charging performance. Ceramic-based solid electrolytes have attracted attention due to their high thermal and electrochemical stabilities. Li-glass solid electrolytes (e.g., Li2O–LiCl–B2O3–Al2O3, LCBA) are promising materials because they enable low-temperature sintering (<550 °C), suppress lithium volatilization, mitigate ionic conductivity degradation, and enable cost-effective manufacturing. LCBA can be co-sintered with graphite anodes to form composite anode materials for LCBA-based all-solid-state batteries. However, insufficient densification and shrinkage mismatch often lead to limited ionic conductivity and interfacial delamination. In this study, the sintering behavior of LCBA was investigated using a hot-press-assisted process, and LCBA/graphite composite anodes were co-sintered to evaluate their electrochemical and interfacial properties. The LCBA electrolyte sintered at 550 °C exhibited high densification and an ionic conductivity of 3.86 × 10−5 S cm−1. Additionally, the composite containing 50 wt% LCBA achieved a maximum tensile stress of ~0.23 MPa and a high interfacial fracture energy of ~180–200 J m−2, indicating enhanced deformation tolerance and fracture resistance. This approach improves the densification, ionic conductivity, and interfacial mechanical stability of LCBA solid electrolytes and their composite anodes, highlighting their potential for next-generation all-solid-state secondary battery applications.

13 May 2026 in Materials
Verified
Journal Article
Open access
PDF file
WLWookyung Lee
Wookyung Lee
JCJaeseung Choi
Jaeseung Choi
JAJungkeun Ahn
Jungkeun Ahn
HLHanbyul Lee
Hanbyul Lee
BKByungwook Kim
Byungwook Kim
CYChang-Bun Yoon
Chang-Bun Yoon
Solid-state electrolytes (SSEs) are essential for achieving long-term stability and fast-charging performance in secondary batteries. Although Li1.3Al0.3Ti1.7(PO4)3 (LATP) offers high ionic conductivity, its practical application is restricted by high-temperature sintering requirements and interfacial reduction at the lithium anode. In contrast, Li-based oxide electrolytes can be sintered below 600 °C, offering improved compatibility with conventional electrodes such as graphite and silicon. In this study, a Li2O–LiCl–B2O3–Al2O3 (LCBA)/LATP composite SSE was fabricated via hot-press co-sintering at 600 °C. Composites with LCBA:LATP weight ratios of 8:2, 7:3, 6:4, 5:5, 3:7, and 2:8 were prepared to identify the optimal composition. The 3:7 composite achieved a sintered density of 2.40 g/cm3 and an ionic conductivity of 2.5 × 10−4 S/cm. Phase evolution and sintering behavior were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Compared to single-phase LCBA or LATP, the composite electrolyte exhibited improved interfacial stability and lower interfacial resistance against lithium metal.

15 August 2026 in Micromachines
Verified
Journal Article
Open access
PDF file
BKByungwook Kim
Byungwook Kim
YJYongwoon Jang
Yongwoon Jang
HNHyeon Wu Nam
Hyeon Wu Nam
CHChangyun Hong
Changyun Hong
MKMIn Gyun Kang
MIn Gyun Kang
CYChang-Bun Yoon
Chang-Bun Yoon
Hafnium oxide (HfO2) has emerged as a promising charge trap layer (CTL) for nonvolatile memory devices; however, its long-term reliability remains challenging due to leakage current through grain boundary pathways and interface defect formation. Within plasma-enhanced atomic layer deposition (PEALD), direct plasma ALD (DPALD) forms crystalline HfO2 with deeper trap sites, while its ion-assisted nature may contribute to interface damage, resulting in a lower net trap density than remote plasma ALD (RPALD), which better preserves interfacial quality. We propose an interface–bulk–interface (RP/DP/RP) process design that places RPALD at the interfaces and DPALD in the bulk, aiming to combine bulk trap sites with interfacial protection. Charge trap memory (CTM) devices were fabricated across RP/DP/RP thickness combinations. Within the tested range, the optimized structure exhibited the widest memory window and the highest effective trapped charge density among the measured devices, improving upon DPALD and comparable to RPALD, together with the lowest near-interface trap density at the Si/Al2O3 interface. The device also maintained a stable memory window up to 104 program/erase cycles, and short-term retention data suggest potentially stable program and erase states, requiring longer-term validation. These results indicate that spatial modulation of plasma modes offers a process-level strategy for improving HfO2-based CTM devices.

24 June 2026 in Inorganics
Verified
Journal Article
Open access
PDF file
JAJungkeun Ahn
Jungkeun Ahn
BKBojoong Kim
Bojoong Kim
DODabin Oh
Dabin Oh
WLWookyung Lee
Wookyung Lee
JCJaeseung Choi
Jaeseung Choi
CYChang-Bun Yoon
Chang-Bun Yoon
Although garnet-type Li7La3Zr2O12 (LLZO) solid electrolytes are promising candidates for high-energy-density all-solid-state batteries, their practical applications are limited by high-voltage oxidation instability and interfacial degradation. To address these limitations, Al-doped LLZO (Al-LLZO) solid electrolytes were synthesized via a conventional solid-state reaction method, and the effects of PE-ALD-derived Al2O3 nanocoatings on electrochemical properties and interfacial stability were investigated. Al2O3 nanocoatings with different structures (5 and 10 nm single-side, and 5 nm double-side) were deposited on Al-LLZO pellets using plasma-enhanced atomic layer deposition. The Al2O3 coating reduced electronic conductivity by approximately one order of magnitude while maintaining similar ionic conductivity. Linear sweep voltammetry revealed that initial oxidation onset voltage increased from ~4.2 V (bare Al-LLZO) to ~5.0 V (5 nm-coated samples), while the 10 nm-coated sample exhibited the most delayed anodic current response (~5.2 V). The 5 nm double-side coated sample showed the best Li plating/stripping stability with a critical current density of 1.10 mA/cm2 and stable long-term galvanostatic cycling behavior over 200 h at 0.05 mA/cm2. Thus, ALD-based Al2O3 interfacial engineering can simultaneously improve the high-voltage oxidation and Li metal interfacial stabilities of garnet-type Al-LLZO solid electrolytes for practical all-solid-state batteries.