Jaeseung Choi

Ms. Jaeseung Choi


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2026 in Inorganics
Verified
Journal Article
Open access
PDF file
YKYoungsun Ko
Youngsun Ko
HLHanbyul Lee
Hanbyul Lee
WLWookyung Lee
Wookyung Lee
JCJaeseung Choi
Jaeseung Choi
JAJungkeun Ahn
Jungkeun Ahn
CYChang-Bun Yoon
Chang-Bun Yoon
With the expanding electric vehicle market, there is increasing demand for improved battery safety and fast-charging performance. Ceramic-based solid electrolytes have attracted attention due to their high thermal and electrochemical stabilities. Li-glass solid electrolytes (e.g., Li2O–LiCl–B2O3–Al2O3, LCBA) are promising materials because they enable low-temperature sintering (<550 °C), suppress lithium volatilization, mitigate ionic conductivity degradation, and enable cost-effective manufacturing. LCBA can be co-sintered with graphite anodes to form composite anode materials for LCBA-based all-solid-state batteries. However, insufficient densification and shrinkage mismatch often lead to limited ionic conductivity and interfacial delamination. In this study, the sintering behavior of LCBA was investigated using a hot-press-assisted process, and LCBA/graphite composite anodes were co-sintered to evaluate their electrochemical and interfacial properties. The LCBA electrolyte sintered at 550 °C exhibited high densification and an ionic conductivity of 3.86 × 10−5 S cm−1. Additionally, the composite containing 50 wt% LCBA achieved a maximum tensile stress of ~0.23 MPa and a high interfacial fracture energy of ~180–200 J m−2, indicating enhanced deformation tolerance and fracture resistance. This approach improves the densification, ionic conductivity, and interfacial mechanical stability of LCBA solid electrolytes and their composite anodes, highlighting their potential for next-generation all-solid-state secondary battery applications.

13 May 2026 in Materials
Verified
Journal Article
Open access
PDF file
WLWookyung Lee
Wookyung Lee
JCJaeseung Choi
Jaeseung Choi
JAJungkeun Ahn
Jungkeun Ahn
HLHanbyul Lee
Hanbyul Lee
BKByungwook Kim
Byungwook Kim
CYChang-Bun Yoon
Chang-Bun Yoon
Solid-state electrolytes (SSEs) are essential for achieving long-term stability and fast-charging performance in secondary batteries. Although Li1.3Al0.3Ti1.7(PO4)3 (LATP) offers high ionic conductivity, its practical application is restricted by high-temperature sintering requirements and interfacial reduction at the lithium anode. In contrast, Li-based oxide electrolytes can be sintered below 600 °C, offering improved compatibility with conventional electrodes such as graphite and silicon. In this study, a Li2O–LiCl–B2O3–Al2O3 (LCBA)/LATP composite SSE was fabricated via hot-press co-sintering at 600 °C. Composites with LCBA:LATP weight ratios of 8:2, 7:3, 6:4, 5:5, 3:7, and 2:8 were prepared to identify the optimal composition. The 3:7 composite achieved a sintered density of 2.40 g/cm3 and an ionic conductivity of 2.5 × 10−4 S/cm. Phase evolution and sintering behavior were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Compared to single-phase LCBA or LATP, the composite electrolyte exhibited improved interfacial stability and lower interfacial resistance against lithium metal.

24 June 2026 in Inorganics
Verified
Journal Article
Open access
PDF file
JAJungkeun Ahn
Jungkeun Ahn
BKBojoong Kim
Bojoong Kim
DODabin Oh
Dabin Oh
WLWookyung Lee
Wookyung Lee
JCJaeseung Choi
Jaeseung Choi
CYChang-Bun Yoon
Chang-Bun Yoon
Although garnet-type Li7La3Zr2O12 (LLZO) solid electrolytes are promising candidates for high-energy-density all-solid-state batteries, their practical applications are limited by high-voltage oxidation instability and interfacial degradation. To address these limitations, Al-doped LLZO (Al-LLZO) solid electrolytes were synthesized via a conventional solid-state reaction method, and the effects of PE-ALD-derived Al2O3 nanocoatings on electrochemical properties and interfacial stability were investigated. Al2O3 nanocoatings with different structures (5 and 10 nm single-side, and 5 nm double-side) were deposited on Al-LLZO pellets using plasma-enhanced atomic layer deposition. The Al2O3 coating reduced electronic conductivity by approximately one order of magnitude while maintaining similar ionic conductivity. Linear sweep voltammetry revealed that initial oxidation onset voltage increased from ~4.2 V (bare Al-LLZO) to ~5.0 V (5 nm-coated samples), while the 10 nm-coated sample exhibited the most delayed anodic current response (~5.2 V). The 5 nm double-side coated sample showed the best Li plating/stripping stability with a critical current density of 1.10 mA/cm2 and stable long-term galvanostatic cycling behavior over 200 h at 0.05 mA/cm2. Thus, ALD-based Al2O3 interfacial engineering can simultaneously improve the high-voltage oxidation and Li metal interfacial stabilities of garnet-type Al-LLZO solid electrolytes for practical all-solid-state batteries.