In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity.
The objective of this study was to evaluate the effect of radiant exposure on the chemical and physical properties of four commercial dental resin composites. The four dental resin composites used were Kalore, Admira, Tetric N-Ceram Bulk Fill, and Filtek Z350 XT. The composites were subjected to three curing protocols: 1000 mW/cm2 for 5 s, 1000 mW/cm2 for 10 s, and 400 mW/cm2 for 25 s. The flexural strength, elastic modulus, water sorption, water solubility, degree of conversion, and polymerization shrinkage were evaluated. The results were analyzed by means of ANOVA and Tukey tests. For Admira and Kalore, significant differences between light exposure protocols were observed for the elastic modulus (p < 0.001), which was higher when a higher amount of radiant exposure was used. For Filtek Z350, differences were only observed for the degree of conversion (p < 0.001), and a higher amount of radiant exposure allowed us to obtain higher values. The Tetric N-Ceram Bulk Fill analysis showed significant differences for the elastic modulus and water sorption (p < 0.001), and specimens that had been subject to a radiant exposure of 10 J/cm2 showed a higher elastic modulus. In most cases, the physical and mechanical properties analyzed were not affected by different radiant exposure values. Other resin-based composite (RBC) characteristics seem to have a greater influence on material properties.
5 December 2019 in Educación y Salud Boletín Científico Instituto de Ciencias de la Salud Universidad Autónoma del Estado de Hidalgo
La investigación es un procedimiento reflexivo, sistemático, controlado y crítico que tiene por finalidad descubrir o interpretar los hechos de un fenómeno. El diseño de investigación constituye el plan general del investigador para obtener respuestas a sus interrogantes o comprobar la hipótesis de investigación, además, estipula la estructura fundamental y especifica de la intervención.
4 March 2022 in Journal of Adhesion Science and Technology
The objective of this work was to evaluate the effect of different protocols on the shear bond strength (SBS) of repairs made to aged composite resin substrates. Eighty cylindrical composite resin specimens (IPS Empress Direct, Ivoclar-Vivadent) were prepared, and divided into two main groups: in group 1 a silane agent was applied, while in group 2, the silane agent was not applied. Each group was then subdivided into four groups according to the adhesive system used: control, without any adhesive, Single Bond Universal, Tetric Bond Universal, and Clearfil SE Bond. As a reference group, the cohesive strength of the composite resin was determined. After applying the adhesive protocol, the treated surfaces were restored with composite resin cylinders. The specimens were stored in distilled water for 24 h or 6 months at 37 °C and subjected to a SBS test. The data were evaluated using a three-way ANOVA test followed by a Tukey test (α = 0.05). The previous application of silane did not significantly affect the SBS (p = 0.162), on the contrary, the type of adhesive protocol and aging impacted significantly (p < 0.001). The SBS was significantly higher when Clearfil SE Bond was used (p < 0.001), with the values achieved by this group being similar to those of the reference group (p ≥ 0.996). The use of a silane coupling agent before the application of an adhesive does not significantly affect the process of adhesion to an aged resin. The application of a solvent-free adhesive system was able to restore the cohesive strength values of the material.