Dariusz Tymosiak

Dr. Dariusz Tymosiak


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2018 in Annals of Warsaw University of Life Sciences – SGGW. Land Reclamation
Verified
Journal Article
Open access
PDF file
MSMaria Sulewska
Maria Sulewska
DTDariusz Tymosiak
Dariusz Tymosiak
The purpose of the work is to analyze compaction parameters of non-cohesive uniformly graded soil – optimum moisture content (wopt) and maximum dry density (ρdmax), obtained from Proctor tests and using vibrating table. The research was conducted on even-graded medium sand (Safgr), of uniformity coefficient CU = 3.10 and coefficient of curvature CC = 0.99. Compaction parameters were examined by using Proctor tests – standard Proctor tests (I and II) and modified Proctor tests (III and IV) in compliance with PN-B-04481:1988, and also standard (A+A and A+B) and modified (B+A and B+B) according to PN-EN 13286-2:2010, and by using a vibrating table in compliance with PN-EN 13286-5:2006 at four sample loading attempts. The moisture content of the samples increased by 1–2% in the range of about 0% to about 10%. On the basis of the analysis of data from soil studies with uniform grain size (poorly compactable soil), it can be concluded that the values of test results ρdmax of medium sand with standard (or modified) Proctor tests according to PN-B-04481:1988 and PN-EN 13286-2:2010 are close to each other. It can be concluded that in the case of ρdmax, the vibrating table method (with the assumed test conditions) allows to achieve results comparable to those of Proctor (mean relative difference 1.88%). Using the vibrating table the wopt values were lower than those obtained by Proctor tests (mean relative difference of 18.84%).

29 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
DTDariusz Tymosiak
Dariusz Tymosiak
MSMaria Sulewska
Maria Sulewska
WKWanda Kokoszka
Wanda Kokoszka
MSMarta Słowik
Marta Słowik
EBEwa Błazik-Borowa
Ewa Błazik-Borowa
MPMonika Puchlik
Monika Puchlik
The aim of the article is to analyze the possibilities of using a lightweight dynamic cone probe DCP to determine the quality of compaction of surface layers of embankments (from 0.10 m to approx. 0.80 m below ground level). For this purpose, comparative tests of non-cohesive soil used for the construction of embankments were carried out using the DCP test and direct tests of the degree of compaction IS in a calibration chamber with the following dimensions: height 1.10 m and diameter 0.75 m. The subsoil was prepared from difficult-to-compact sand (Sa) with a uniformity coefficient of CU = 3.10 and curvature coefficient of CC = 0.99. The soil in the laboratory in the calibration chamber was compacted in layers using a vibratory plate compactor. A database for statistical analysis was obtained, n = 68 cases described by seven variables: z, ρ, w, ρd, IS, PI, N10(DCP). It was found that the DCP probe can be used to assess the degree of compaction of embankments made of non-cohesive soil, using the developed relationship IS = f(z, N10(DCP)).