Serpentinization, or the aqueous alteration of ultramafic rocks, results in challenging environments for life in continental sites due to the combination of extremely high pH, low salinity and lack of obvious electron acceptors and carbon sources. Nevertheless, certain Betaproteobacteria have been frequently observed in such environments. Here we describe physiological and genomic features of three related Betaproteobacterial strains isolated from highly alkaline (pH 11.6) serpentinizing springs at The Cedars, California. All three strains are obligate alkaliphiles with an optimum for growth at pH 11 and are capable of autotrophic growth with hydrogen, calcium carbonate and oxygen. The three strains exhibit differences, however, regarding the utilization of organic carbon and electron acceptors. Their global distribution and physiological, genomic and transcriptomic characteristics indicate that the strains are adapted to the alkaline and calcium-rich environments represented by the terrestrial serpentinizing ecosystems. We propose placing these strains in a new genus 'Serpentinomonas'.
The Arabian Peninsula's advantageous climate, availability of non-arable land, access to seawater and CO2-rich flue gas, make it an attractive location for microalgae biomass production. Despite these promising aspects, the region has seen very few studies into the commercial feasibility of algae-based value chains. This work aims to address this gap through a techno-economic feasibility study of algae biomass production costs, comparing different photobioreactor types, locations, and production scales. Flat panel and raceway pond cultivation systems were found to be the most economically attractive cultivation systems, with biomass production costs as low as 2.9 €·kg-1. Potential cost reductions of up to 42.5% and 25% could be accomplished with improvements in photosynthetic efficiencies and increased culture temperatures, respectively. As of such, efforts to source local thermo- and photo- tolerant strains could be the key to unlock the potential of the region for algae commercialization, linking into food, feed and nutraceutical industries.
CO2 fixation by phototrophic microalgae and cyanobacteria is seen as a possible global carbon emissions reducer; however, novel microalgae and cyanobacterial strains with tolerance to elevated temperatures and CO2 concentrations are essential for further development of algae-based carbon capture. Four novel strains isolated from the Arabian Gulf were investigated for their thermotolerance and CO2-tolerance, as well as their carbon capture capability. Two strains, Leptolyngbya sp. and Picochlorum sp., grew well at 40 °C, with productivities of 106.6 ± 10.0 and 87.5 ± 2.1 mg biomass L−1 d−1, respectively. Tetraselmis sp. isolate showed the highest biomass productivity and carbon capture rate of 157.7 ± 10.3 mg biomass L−1 d−1 and 270.8 ± 23.9 mg CO2 L−1 d−1, respectively, both at 30 °C. Under 20% CO2, the biomass productivity increased over 2-fold for both Tetraselmis and Picochlorum isolates, to 333.8 ± 41.1 and 244.7 ± 29.5 mg biomass L−1 d−1. These two isolates also presented significant amounts of lipids, up to 25.6 ± 0.9% and 28.0 ± 2.0% (w/w), as well as presence of EPA and DHA. Picochlorum sp. was found to have a suitable FAME profile for biodiesel production. Both Tetraselmis and Picochlorum isolates showed promising characteristics, making them valuable strains for further investigation towards commercial applications and CO2 capture.
Nannochloris atomus (QUCCCM31) is a local marine microalga showing potential to serve as renewable feedstock for biodiesel production. The investigation of the impact of temperature variation and nitrogen concentrations on the biomass and lipid productivities evidenced that biomass productivity increased with the temperature to reach an optimum of 195 mgL−1 d−1 at 30 °C. Similarly, the lipid content was strongly influenced by the elevation of temperature; indeed, it increased up to ~3 folds when the temperature increased from 20 to 40 °C. When both stresses were combined, triacylglycerols and lipid productivity reached a maximum of 45% and 88 mgL−1 d−1, respectively at 40 °C. Cultures under high temperatures along with Nitrogen-Depleted (ND) favored the synthesis of Fatty Acids Methyl Ester (FAMEs) suitable for high quality biodiesel production, whereas cultures conducted at low temperature coupled with Nitrogen-Limited (NL) led to a production of polyunsaturated fatty acids (PUFAs). Our results support the feasibility of cultivating the thermotolerant isolate QUCCCM31 year-round to meet the sustainability challenges of algal biomass production by growing under temperature and nitrogen variations. The presence of omega 3 and 9 fatty acids as valuable co-products will help in reducing the total process cost via biorefinery.
It is generally recognized that algae could be an interesting option for reducing CO2 emissions. Based on light and CO2, algae can be used for the production various economically interesting products. Current algae cultivation techniques, however, still present a number of limitations. Efficient feeding of CO2, especially on a large scale, is one of them. At TNO, two novel methods have been developed for the integration of flue-gas from power plants with algae production for the capture and utilization of CO2. The first method can be described as being amine based whilst the second is carbonate based. Both methods have in common that algae is used as photochemical desorber of CO2 from absorption liquid. The advantages of these methods is that they are easy to scale-up, would lead to higher CO2 removal efficiencies compared to current CO2 feeding systems for algae, and lower operational cost compared to both conventional CO2 removal using amines and conventional autotrophic algae cultivation. The impact of the new strategies for integrating power plants with algae are described in order to provide more information on their novel aspects and their potential for CO2 mitigation
The effect of light intensity and inoculum volume on the occurrence of photooxidation for Leptolyngbya sp. QUCCCM 56 was investigated, to facilitate the transition from small‐scale laboratory experiments to large‐scale outdoor cultivation. Indoor, the strain was capable of growing at light intensities of up to 5600 µmol photons/m2/s, at inoculation densities as low as 0.1 g/L (10% inoculation volume vol/vol). Levels of chlorophyll and phycocyanin showed a significant decrease within the first 24 h, indicating some level of photooxidation, however, both were able to recover within 72 h. When cultivated under outdoor conditions in Qatar during summer, with average peak light intensities 1981 ± 41 μmol photons/m2/s, the strain had difficulties growing. The culture recovered after an initial adaptation period, and clear morphological differences were observed, such as an increase in trichome length, as well as coiling of multiple trichomes in tightly packed strands. It was hypothesized that the morphological changes were induced by UV‐radiation as an adaptation mechanism for increased self‐shading. Furthermore, the presence of contaminating ciliates could have also affected the outdoor culture. Both UV and contaminants are generally not simulated under laboratory environments, causing a mismatch between indoor optimizations and outdoor realizations.