Amorphous or polycrystalline tantalum pentoxide (Ta2O5) films with high resistance have been widely used in semiconductor devices as insulating dielectric layers. In this work, tungsten (W) doped δ-Ta2O5 (0001) monocrystal films were deposited on Y-stabilized ZrO2 (111) substrates using a pulsed laser deposition system. The lattice structure, heteroepitaxial relationship, and electrical properties of the films were analyzed in detail. The carrier concentration, Hall mobility, and resistivity of the 2% W doped δ-Ta2O5 film are 6.61 × 1015 cm−3, 65.2 cm2/V s and 14.5 Ω cm, respectively. High performance metal–semiconductors–metal ultraviolet (UV) detectors based on the W doped δ-Ta2O5 films were fabricated. The UV detector based on a 2% W doped δ-Ta2O5 film exhibits a high photo responsivity of 10.32 A/W and a photocurrent-to-darkcurrent ratio of 1.3 × 104. The performances of the UV detectors in this work are so high, which indicates that the W doped δ-Ta2O5 films can be applied in UV detectors as an active layer.
Vertical graphene (VG) combines the excellent properties of conventional graphene with a unique vertical nanosheet structure, and has shown tremendous promise in the field of electronics and composites. However, its complex surface morphology brings great difficulties to micro-nano fabrication, especially regarding photolithography induced nanosheet collapse and remaining chemical residues. Here, we demonstrate an innovative method for directly growing patterned VG on a SiO2/Si substrate. A patterned Cr film was deposited on the substrate as a barrier layer. The VG was synthesized by PECVD on both the patterned Cr film and the exposed SiO2/Si substrate. During the cooling process, the patterned Cr film covered by VG naturally peeled off from the substrate due to the thermal stress mismatch, while the VG directly grown on the SiO2/Si substrate was remained. The temperature-dependent thermal stress distribution in each layer was analyzed using finite element simulations, and the separation mechanism of the Cr film from the substrate was explained. This method avoids the contamination and damage caused by the VG photolithography process. Our work is expected to provide a convenient and reliable solution for the manufacture of VG-based electronic devices.