The identification of non-circular critical slip surfaces in slopes using metaheuristic algorithms remains a frontier challenge in geotechnical engineering. Such approaches are particularly effective for assessing the stability of heterogeneous slopes, including earth dams. This study introduces ODACO, a comprehensive program developed to determine the optimum cross-section of earth dams with berms. The program employs the Max–Min Ant System (MMAS), one of the most robust variants of the ant colony optimization algorithm. For each candidate cross-section, the critical slip surface is first identified using MMAS. Among the stability-compliant alternatives, the configuration with the most efficient shell geometry is then selected. The optimization process is conducted automatically across all loading conditions, incorporating slope stability criteria and operational constraints. To ensure that the optimized cross-section satisfies seismic performance requirements, an artificial neural network (ANN) model is applied to rapidly and reliably predict seismic responses. These ANN-based predictions provide an efficient alternative to computationally intensive dynamic analyses. The proposed framework highlights the potential of optimization-driven approaches to replace conventional trial-and-error design methods, enabling more economical, reliable, and practical earth dam configurations.
5 November 2025 in Construction and Building Materials
This study examines the performance of mat foundations in 13 blocks of eight-story concrete-walled residential buildings. Topographic monitoring bolts were used to monitor the slab’s construction, which was 0.35 m thick and comprised an area of 225 m2. Using the collected data, a retro-analysis of the modulus of elasticity was conducted to obtain the geotechnical parameters for forecasting the settlement using the elasticity theory. A nonlinear approach for construction modeling and soil–structure interactions showed that the earthworks at the start of construction had a significant role in settling. Blocks in landfills settled faster than those in land-cut zones. The partial execution of building levels was found to be critical in terms of angular distortions and stresses in the concrete slab. The partial lifting of the foundation plate was confirmed in blocks with partial building floor execution, demonstrating the importance of assessing the foundation’s behavior at this stage. The modulus of elasticity dropped as construction progressed, with landfill parts being particularly vulnerable. Creep settlements contributed significantly, accounting for about 20% of the total settlements in some blocks. The numerical staged construction model accurately replicated the behaviors observed in the monitoring data, confirming the hypothesis of the partial raising of the foundation during the building process, which resulted in higher angular distortions. Based on the results obtained, the authors strongly recommend that the simultaneous consideration of soil–structure interactions and construction effects be commonly used in foundation designs.