Mohamed Elobaid Musa Moneef

Dr. Mohamed Elobaid Musa Moneef

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 November 2025 in Civil and Energy Research
Verified
Journal Article
Open access
PDF file
MMMohamed Elobaid Musa Moneef
Mohamed Elobaid Musa Moneef
MAMuhammad Usama Aslam
Muhammad Usama Aslam
MEMohammed Elhassan Omer Elhassan
Mohammed Elhassan Omer Elhassan
MSMusaab Suliman
Musaab Suliman
MSMuhammad Usman Siddiq
Muhammad Usman Siddiq
In earthquake-prone regions, ensuring structural resilience is crucial, particularly for essential buildings such as hospitals, schools, and commercial complexes. This study investigates the seismic performance of a G+12 story reinforced concrete (RC) building using ETABS 2022 and evaluates the effects of base isolation with Lead Rubber Bearings (LRBs). The model was analysed in both fixed-base and base-isolated configurations under seismic loading, to assess key parameters, including inter-story drift, story displacement, shear, stiffness, and natural periods. The results indicated significant improvements in the base-isolated model, with inter-story drifts reduced by up to 68% in the X direction and 69% in the Y direction, demonstrating a marked reduction in lateral deformations. Although absolute story displacements increased, this was due to the flexibility incorporated into the isolation system, which enabled the isolators to absorb and dissipate seismic energy, thereby reducing forces on the superstructure. Furthermore, story shear was reduced by 29–31% across all stories, and story stiffness was enhanced by up to 318% at lower stories, contributing to improved structural stability. The natural periods of the building’s vibration modes increased, with the fundamental period lengthening by 45.5%. This shifted the building’s response away from the predominant seismic frequencies and reduced seismic acceleration demands. However, the study assumes ideal behavior of the LRBs without accounting for potential long-term degradation. Despite increased displacements, the reduction in base shear and drift indicates significant cost savings in repairs and maintenance, providing insights into the cost-effectiveness and benefits of base isolation in earthquake-prone areas.

5 August 2026 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
MOHAMMAD ASHRAF HOSSAINMOHAMMAD ASHRAF HOSSAIN
MOHAMMAD ASHRAF HOSSAIN
MSMuhammad Usman usman Siddiq
Muhammad Usman usman Siddiq
Jahanzeb JavaidJahanzeb Javaid
Jahanzeb Javaid
MMMohamed Elobaid Musa Moneef
Mohamed Elobaid Musa Moneef
This work presents ANSYS Workbench simulations analyzing fatigue crack propagation in high-performance aluminum alloys 2524-T3, 2024-T42, and 2024-T351 under stress ratios R = 0.1, 0.3, and 0.5 using pre-meshed crack tools and SMART Fracture automation. Key simulation outputs include crack length evolution, cycle count, equivalent stress intensity factor ranges (ΔK), and crack resistance curves (Kr). At R = 0.1, 2524-T3 exhibited the highest crack growth rate (da/dN = 3.20×10⁻⁸ mm/cycle, ΔK = 7.28 MPa√m, Nf ≈ 459×10⁶ cycles), while 2024-T351 showed the lowest rate (da/dN = 2.76×10⁻⁹ mm/cycle, ΔK = 1.65 MPa√m, Nf ≈ 5.27×10⁹ cycles) — a 10.4-fold reduction in da/dN and 11.5-fold increase in fatigue life. At R = 0.5, 2024-T351 achieved da/dN < 1.0×10⁻⁸ mm/cycle with Nf > 6×10⁹ cycles, outperforming 2024-T42 (da/dN = 3.82×10⁻⁹ mm/cycle, Nf ≈ 2.92×10⁹) and 2524-T3 (da/dN = 2.76×10⁻⁹ mm/cycle, Nf ≈ 5.27×10⁹). Kr curve analysis revealed steep resistance decay for 2524-T3 (R = 0.1), stable plateau behavior for 2024-T42 (R = 0.3–0.5), and rising Kr trends for 2024-T351 across all R-ratios, indicating active crack-tip shielding mechanisms. SEM fractography validated simulation trends: 2524-T3 showed brittle trans granular features with secondary crack density of 12.3 ± 2.1 cracks/mm²; 2024-T42 exhibited mixed-mode fracture with moderate dimple density (8.7 ± 1.4 μm⁻²); 2024-T351 displayed ductile dimple morphology with the highest dimple density (18.4 ± 2.6 μm⁻²) and minimal secondary cracking (2.1 ± 0.8 cracks/mm²). These microstructural metrics confirm 2024-T351 as the optimal candidate for fatigue-critical aerospace and automotive applications.