The prevalent nature of micro and nanoplastics (MP/NPs) on environmental pollution and health-related issues has led to the development of various methods, usually based on Fourier-transform infrared (FTIR) and Raman spectroscopies, for their detection. Unfortunately, most of the developed techniques are laboratory-based with little focus on in situ detection of MPs. In this review, we aim to give an up-to-date report on the different optical measurement methods that have been exploited in the screening of MPs isolated from their natural environments, such as water. The progress and the potential of portable optical sensors for field studies of MPs are described, including remote sensing methods. We also propose other optical methods to be considered for the development of potential in situ integrated optical devices for continuous detection of MPs and NPs. Integrated optical solutions are especially necessary for the development of robust portable and in situ optical sensors for the quantitative detection and classification of water-based MPs.

Microplastic pollution in water bodies is an alarming problem which needs to be addressed. However, issues such as size, shape and their appearance to light (transparent or translucent) make it difficult to be optically detected. Here, a feasibility study of a portable prototype optical sensor with the capability of measuring simultaneously specular laser light reflection and transmission from microplastic particles is presented. The specular reflection signal and the transmitted interference pattern were recorded with a photodiode and a CCD camera, respectively. With the combination of these two modes of detection, it is possible to screen the type, size, and nonplanarity of two microplastics types, i.e., transparent polyethylene terephthalate (PET) and translucent low-density polyethylene (LDPE), in a volume of freshwater, with high confidence. In principle, the prototype could be used for the detection of both floating microplastics as well as microplastics experiencing sedimentation in natural water bodies, and in water filtration in water treatment plants.

Erosion of microplastics due to residence time in aquatic environments causes roughening of the microplastic. Unfortunately, currently used measurement methods do not provide information on the surface roughness of the microplastic embedded in water. In this study we propose a novel method by using transmittance to get information on the magnitude of the surface roughness of microplastics and to rank microplastics by thickness. For such a purpose, we studied optical properties such as dispersion, absorption of both plastics and water in the partial spectral range of visible light (Vis), transmission and scattering of light by plastic sheets, as well as, the calculated sample thickness in the Vis region. These were explored for the detection of both smooth and roughened plastic sheets immersed in water. Moreover, by using the transmission spectrum and refractive index of both plastic and water it is possible to estimate the average surface roughness of plastic samples. Our results suggest that the optical properties in the Vis region offer an interesting way for the detection of both rough and smooth plastic sheets and for ranking the type of plastics in an aquatic environment.

The need for wideband metamaterial absorbers (WBMA) for applications other than sensing and filtering has demanded modifications to the conventional three-layer metal-insulator-metal (MIM) absorber configuration. This modification often results in complex geometries and an increased number of layers requiring complex lithographic processes for fabrication. Here, we show that a metamaterial absorber with rectangular geometry in the simple MIM configuration can provide wideband absorption covering the ultraviolet and near-infrared spectral range. Due to its asymmetric nature, the WBMA is sensitive to the polarization of the incident light and independent of the angle of incidence up to about 45° depending on the polarization of the incident light. The characteristics of the WBMA presented here may be useful for applications such as detectors for wide spectral band applications.

The growth of microplastic (MP) pollution is of increasing concern and represents a global challenge. In situ detection of these small particles is difficult because of their sizes, shapes, transparency or translucency, surface texture and ambient conditions. We propose and demonstrate the use of a prototype optical sensor to detect flat, nearly flat, curved and rough MPs prepared from commercial polyethylene terephthalate (PET) plastics and PET bottles in water. The prototype measures the specular reflection of a laser radiation incident on MPs, with a photodiode, and the transmitted laser speckle pattern, with a charge-coupled device (CCD) camera. The presence of the MPs as well as the optical surface roughness are determined from the specular reflection. Additionally, the so-called speckle contrast calculated from the speckle pattern, as a promising tool, is used to rank the rough MPs according to the different average surface roughness, to approximately twice the wavelength of the probing light. The novel application of laser speckle contrast and the optical roughness estimation allows the description of MP surface roughness in water. Moreover, in combination with earlier studies, these results, therefore, pave a way for the complete and a relatively easier description of MPs properties optical and also advances our step towards the development of simple and robust optical monitoring techniques for micro and nanoplastics in open and wastewater.

Microplastic (MP) pollution is alarming and poses an imminent threat to the environment with a direct impact on our health and that of fauna in natural water bodies. The understanding of light–MP interactions in water as well as the need for low-cost and robust optical sensors for the detection of MPs that appear everywhere is, therefore, necessary. We have demonstrated the use of a prototype optical sensor in the detection of flat and curved [from polyethylene terephthalate (PET) water bottle] pristine and rough MPs from commercial PET and low-density polyethylene plastics in water. The optical sensor utilizes a photodiode and charge-coupled device (CCD) camera to record simultaneously the specular reflection and the speckle pattern modified by the MPs. In this study, we have exploited the specular reflection in the detection of the pristine samples, whereas the speckle contrast, the normalized standard deviation of the speckle pattern intensity, is utilized in the qualitative estimation of the “effective” surface roughness of the MPs. With the sensor, one can, therefore, detect PET MPs with varying average surface roughness, Ra an indication of MP aging, embedded in water. The prototype can detect the effect of size, type, curvature, transparency, and the translucency of sunken and/or floating MPs in water based on the reflection, scattering, and the (edge) diffraction of light. However, the optical sensor is limited in the discrimination of MP concentration in water. Further modifications to the sensor are needed for its practical implementation in complex natural water bodies and wastewaters.