The accumulation of electronic waste (E-waste) has become a significant global environmental issue, driven by the characteristics of the modern era and the ever-increasing use of electronic devices. Thus, a sustainable approach is necessary to overcome this issue. In this paper, an overview of utilizing E-waste as a sustainable aggregate in concrete production was comprehensively reviewed. The basic composition, characteristics, and production techniques were discussed. In addition to that, the colour, shape, size, aggregate crushing value, and water absorption of E-waste concrete were also discussed. Furthermore, the workability properties such as slump flow, mechanical properties (compressive strength, flexural strength, tensile strength) and thermal resistance of E-waste concrete identified by the various researchers were summarised. Based on the literature review, it is concluded that the shape and size distributions of E-waste particles greatly influenced the aggregate properties, and the percentage of replacement of E-waste aggregate affect the workability and mechanical and thermal properties of E-waste concrete.
Urbanization and population growth in India have quickened, leading to an annual generation of around 62 million tonnes of municipal solid waste (MSW). Improper management of organic waste presents a major environmental problem due to air and water pollution, soil contamination and greenhouse gas production. This research aims to develop refuse-derived fuel (RDF) as a viable option, converting waste into a high-calorific energy carrier for industrial use. The RDF samples were collected from five strategic locations in Uttar Pradesh: Morta Site, Pipeline Site, and Sector 146 Noida, covering various waste compositions found at these landfill sites. Proximate and ultimate analyses of the RDF prepared from these sources were conducted, followed by in-depth Thermogravimetric Analysis (TGA) to validate its suitability as a potential feedstock. Careful waste segregation and treatment for better fuel quality can help minimize the difference in calorific values between different sites. Based on RDF tests, the waste-to-energy technology can divert over 30 % of solid waste from landfills and cut greenhouse gas emissions by as much as 25 % compared to traditional disposal methods. Unlike RDF, which is part of the replacement line for coal in industrial furnaces such as thermal power plants, it eliminates over 15 % and 20 % of sulfur dioxide (SO2) and nitrogen oxides (NOx). Ensuring that RDFs support sustainable energy technologies and align with circular economy principles, the study's results could enhance energy efficiency in waste management and complement environmental policy goals across all states in India and worldwide.
This study explores the use of embedded piezo sensor (EPS) employing the Electro-Mechanical Impedance (EMI) technique for real-time corrosion monitoring in reinforced E-waste concrete exposed to chloride-laden environments. With the growing environmental concerns over electronic waste (E-waste) and the demand for sustainable construction practices, printed circuit board (PCB) materials were incorporated as partial replacements for coarse aggregates in concrete. The experiment utilized M30-grade concrete mixes, substituting 15% of natural coarse aggregates with E-waste, aiming to assess both sustainability and structural performance without compromising durability. EPS configured with Lead Zirconate Titanate (PZT) patches were embedded into both conventional and E-waste concrete specimens. The EPS monitored the changes in the form of conductance and susceptance signatures across a 100–400 kHz frequency range during accelerated corrosion exposure over a 60-day period in a 3.5% NaCl solution. The corrosion progression was evaluated qualitatively through electrical impedance signatures, visually via rust formation and cracking, and quantitatively using the Root Mean Square Deviation (RMSD) of EMI signatures. The results showed that the EMI technique effectively captured the initiation and propagation stages of corrosion. E-waste concrete exhibited earlier and more severe signs of corrosion compared to conventional concrete, indicated by faster increases and subsequent declines in conductance and susceptance and higher RMSD values during the initiation phase. The EMI-based system demonstrated its capability to detect microstructural changes at early stages, making it a promising method for Structural Health Monitoring (SHM) of sustainable concretes. The study concludes that while the use of E-waste in concrete contributes positively to sustainability, it may compromise long-term durability in aggressive environments. However, the integration of EPS and EMI offers a reliable, non-destructive, and sensitive technique for real-time corrosion monitoring, supporting preventive maintenance and improved infrastructure longevity.