In this work, we investigate cementite precipitation during tempering of quenched 0.3C–1Cr–1Mo steel with martensitic microstructure at temperatures between 400 and 700 °C. Particular focus is laid on the evolution of the Cr-content of particles during tempering, where we observe a transition from fast C diffusion-controlled to slow Cr diffusion-controlled kinetics. For characterization of the precipitates, transmission electron microscopy (TEM) in combination with thermokinetic simulation is applied. With a new concept for treatment of inner-particle diffusion in the framework of the SFFK model implemented in the software MatCalc, a successful simulation of cementite precipitation kinetics and Cr enrichment of precipitates is carried out over the entire temperature range.
1 June 2012 in International Journal of Materials Research
The precipitation of carbides and nitrides in Nb-microalloyed steel is investigated experimentally and theoretically using light optical, scanning and transmission electron microscopy, and the thermokinetic software MatCalc. The simulations are based on a recently developed two-step methodology for precipitation simulation in primary solidification microstructures, where the compositional inhomogeneities from microsegregation are taken into account. The computed segregation is clearly evidenced in electron probe microanalyses of the as-cast microstructure. Based on the results of a Scheil–Gulliver simulation, precipitation kinetics simulations are performed with the chemical compositions corresponding either to the solute-rich interdendritic zone or the solute-depleted dendrite core zone. The predicted phase fractions, mean radii, number densities, and compositions of the precipitates are in good agreement with the experimental investigations.
Aluminum, boron, and titanium microalloyed into high-strength low-alloy boron steel exhibit a complex interplay, competing for nitrogen, with titanium demonstrating the highest affinity, followed by boron and aluminum. This competition affects the formation and distribution of nitrides, impacting the microstructure and mechanical properties of the steel. Titanium protects boron from forming BN and facilitates the nucleation of acicular ferrite, enhancing toughness. The segregation of boron to grain boundaries, rather than its precipitation as boron nitride, promotes the formation of martensite and thus the through-hardenability. Aluminum nitride is critical in controlling grain size through a pronounced pinning effect. In this study, we employ energy- and wavelength-dispersive X-ray spectroscopy and computer-aided particle analysis to analyze the phase content of 12 high-purity vacuum induction-melted samples. The primary objective of this study is to correctly describe the microstructural evolution in the Fe-Al-B-Ti-C-N system using the Calphad approach, with special emphasis on correctly predicting the dissolution temperatures of nitrides. A multicomponent database is constructed through the incorporation of available binary and ternary descriptions, employing the Calphad approach. The experimental findings regarding the solvus temperature of the involved nitrides are employed to validate the accuracy of the thermodynamic database. The findings offer a comprehensive understanding of the relative phase stabilities and the associated interplay among the involved elements Al, B, and Ti in the Fe-rich corner of the system. The type and size distribution of the stable nitrides in microalloyed steel have been demonstrated to exert a substantial influence on the properties of the material, thereby rendering accurate predictions of phase stabilities of considerable relevance.