Rammed earth (RE) is a low-tech recyclable building material with good heat storage and moisture absorption performance that can better maintain the stability of the indoor thermal environment and improve indoor comfort. With innovations in and the development of new technology, the field of rammed earth construction technology is gradually expanding. However, deficiencies in the thermal insulation of traditional rammed earth structures make it impossible for them to meet China’s building energy codes in cold regions. This study constructs a comprehensive evaluation index of the thermal performance of rammed earth walls that is based on the heat transfer mechanism, optimizing the thickness of the boundary conditions of the building interior’s design temperature, as well as the energy demand and economic efficiency. This research also offers a new design for the thermal insulation of rammed earth construction by combining the building energy savings design code with WUFI Pro software. This study demonstrates that the optimum thickness of rammed earth construction in Beijing is about 360 mm, the thickness of extruded polystyrene board (XPS) is 50 mm (for public buildings) and 70 mm (for residential buildings), and the structural form of external insulation offers the highest performance benefit. In addition, this work also evaluates the risk of condensation inside composite rammed earth construction, finding that there is a risk of condensation on the exterior side of the wall and at the interface between the insulation panels and rammed earth wall, thus requiring an additional moisture-proof layer. In this study, thermal mass and insulation are fully considered and a design strategy for rammed earth construction given quantitatively, providing a theoretical basis for the application of rammed earth materials in cold regions.

The thermal performance of buildings in the south of China focuses on thermal mass design, while in the north it favors thermal insulation design, which makes it impossible to achieve a balance between the thermal mass and insulation. Here, a comprehensive evaluation index is developed to measure the thermal performance of a building’s external envelope, which aims to find out the optimal range of the wall thickness under the influence of the thermal mass and insulation, and to seek the correct balance between a building’s energy consumption and the thermal performance of walls. In this paper, four dimensions, namely the heat transfer coefficient, thermal inertia index, attenuation degree, and delay time, are discussed, and the weight coefficients of each subfactor are calculated and isotropically treated to create comprehensive evaluation indicators. Then the distribution laws of the composite index values of common building materials in different climatic zones are examined. The result shows that the correlation coefficient (R²) between M and building energy consumption is about 0.7736–0.8215, which is higher than 0.3494–0.384, the heat transfer coefficient, and is more accurate in predicting building energy demands. Furthermore, through the analysis of the thermal improvement rate and the building energy-saving rate, the suitable wall thickness of commonly used building materials in different climate zones is determined, and the application prospects of the research results are described. With the above research findings, the thickness ranges of walls can be determined at the initial period of building design by combining regional environmental factors and material characteristics to provide a reference for building energy-saving design.

Earth materials are commonly utilized due to their excellent wet properties and environmental friendliness. However, previous research has primarily focused on the impact of additives on the water vapor permeability of earth materials, neglecting the influence of particle size distribution. This has also hindered the quantitative assessment of the water vapor permeability of earth materials. To advance the use of earth materials in building energy conservation, this study develops a mathematical model for the water vapor permeability coefficient of earth materials. This model is derived from experiments that measure the water vapor permeability coefficient of earth materials with varying densities and earth-to-sand ratios, employing both experimental measurements and theoretical analyses. After being adjusted by a quadratic function of error rate and density, the average error rate of the mathematical model decreased from 5.73% to 1.3%, indicating its accuracy. Furthermore, by utilizing this model, the impacts of density, clay, sand, and gravel on the water vapor permeability coefficient of earth materials were quantitatively examined. The results indicate a negative correlation between the water vapor permeability coefficient of earth materials and density. When the clay–sand–gravel ratio was 3.8:5.0:1.2, the vapor permeability of the earth materials was the worst, whereas when the gradation ratio was 4.6:3.4:2.0, the vapor permeability was relatively optimal. The findings of this research can provide a reference for the scientific quantification of the thermo-physical property indices of earth materials in green building design systems.

Earth materials in construction demonstrate significant potential attributed to their accessibility, recyclability, and low energy demands for processing. Modern techniques have enhanced their mechanical strength and durability, enabling their application in load-bearing and infill walls while preserving ecological benefits. However, existing studies on indoor heat–humidity regulation primarily emphasize material parameters and macro-level performance. Moreover, the dynamic interactions between the unique thermal storage–release mechanisms and indoor environments have not been systematically analyzed. With the Kelvin equation, capillary mechanics, adsorption theories, and microstructural analysis were integrated in this study to quantify cyclic capillary condensation and evaporation in microvoids. The results reveal that earth materials contain abundant medium-sized pores (19.85–53.83 nm) sustaining vapor exchange with their surroundings. Capillary condensation occurs 0.86–0.96 times the planar surface vapor pressure, influenced by pore size (negatively correlated) and temperature (negatively correlated). During the daytime, capillary evaporation occurs in the nanopores of the raw earth wall under the influence of the outdoor environment’s cyclical temperature and humidity. This process absorbs heat from the indoor environment and raises the ambient humidity. During the nighttime, capillary condensation occurs in the pores, releasing heat to the indoor area and absorbing moisture from the environment, contributing to the balance of the indoor thermal environment of the earth buildings. The findings lay a scientific foundation for quantitatively evaluating earth buildings’ indoor climate control performance, supporting their integration into green building systems. This research bridges knowledge gaps in micro-to-macro thermal dynamics while advancing the ecological optimization of materials for sustainable architecture.

As an eco-friendly natural building material, rammed earth possesses outstanding hygrothermal performance, which plays a vital role in achieving the goals of sustainable architecture. However, most existing simulations assume constant hygrothermal parameters, resulting in considerable discrepancies between predicted and actual energy performance and consequently underestimating the true passive regulatory potential of rammed earth. To enhance the accuracy of energy consumption predictions in rammed earth buildings, this study integrates experimental measurements with dynamic simulations and experimentally determines both the constant and non-constant hygrothermal parameters of rammed earth. By integrating experimental and simulation approaches, this study reveals a strong positive linear correlation between the thermal conductivity of rammed earth and its moisture content (R² = 0.9919), increasing from 0.77 W/(m·K) to 1.38 W/(m·K) as moisture content rises from 0% to 14%, whereas the moisture resistance factor decreases exponentially with increasing relative humidity (RH). Subsequently, the two sets of hygrothermal parameters were implemented in the WUFI-Plus simulation platform to conduct annual dynamic simulations across five representative Chinese climate zones (Harbin, Beijing, Nanjing, Guangzhou, and Dali), systematically comparing the performance differences between the “non-constant” and “constant” parameter models. The results show that the non-constant parameter model effectively captures the dynamic hygrothermal regulation of rammed earth, exhibiting superior passive performance. It predicts substantially lower building energy loads, with heating energy reductions most pronounced in Harbin and Beijing (16.9% and 15.5%) and cooling energy reductions most significant in Guangzhou and Nanjing (15.8% and 15.2%). This study confirms that accurately accounting for the dynamic hygrothermal coupling process is fundamental to reliably evaluating the performance of hygroscopic materials such as rammed earth, providing a robust scientific basis for promoting energy-efficient, low-carbon, and climate-responsive sustainable building design.