Reducing structural mass and volume is critical to improving efficiency and payload capacity in next-generation small satellites and CubeSats. Additive manufacturing, particularly material extrusion, offers design flexibility and enables the production of lightweight, functional metallic components. This study investigates the integration of nickel–titanium shape memory alloy wires into aluminum-based matrices using a sinter-based material extrusion process, aiming to develop compact actuator systems for aerospace applications. A customized AlSi7Mg aluminum alloy feedstock was extruded into filament form, printed, and embedded with shape memory alloy wires, allowing consolidation during sintering. X-ray micro-computed tomography was used to analyze internal defects and matrix–wire interfacial contact, before and after sintering. Tensile testing of the embedded actuator structures revealed effective mechanical bonding and actuation behavior. The results demonstrate that controlled shrinkage and interfacial bonding enable reliable embedding of shape memory elements without compromising structural integrity. This work provides a promising framework for developing multifunctional aerospace components, where active actuation and structural efficiency can be combined through advanced material extrusion-based manufacturing.

CubeSats are a fundamental tool of space exploration, allowing for the testing of novel ideas that can be upscaled to more efficient satellite systems. This work presents the development and characterisation of an additively manufactured aluminium mechanism designed to enable the self-functionalisation of CubeSat structures through material extrusion metal additive manufacturing, as a foundation for sensor integration. A space-grade AlSi7Mg alloy was selected and prepared as a filament to print a fully functional hinge geometry, aiming to evaluate the feasibility of producing movable metallic components using a low-cost and sustainable extrusion-based process. Produced parts were subjected to debinding and vacuum sintering, achieving a densification above 85% and an average hardness of 52.2 HV. Further characterisation, including micro-computed tomography, X-ray diffraction and dynamic mechanical analysis, was used to assess the microstructural integrity, present phase, and mechanical behaviour of the sintered components. The designed shrinkage-compensated hinge mechanism preserved its rotational mobility after sintering, validating the mechanical inter-locking strategy and the design for additive manufacturing methodology used. The results demonstrate that material extrusion enables the fabrication of lightweight, functional, and integrated aluminium mechanisms suitable for sensor incorporation and actuation in small satellite systems. This proof-of-concept highlights material extrusion as a sustainable and economically viable route for developing intelligent aero-space structures, paving the way for future adaptive and sensor-integrated CubeSat subsystems.