To tackle the problems of high scheduling costs and low photovoltaic (PV) accommodation rates in port microgrids, which are caused by the coupling of uncertainties in new energy output and load randomness, this paper proposes an optimized scheduling method that integrates scenario analysis with multi-energy complementarity. Firstly, based on the improved Iterative Self-organizing Data Analysis Techniques Algorithm (ISODATA) clustering algorithm and backward reduction method, a set of typical scenarios that represent the uncertainties of PV and load is generated. Secondly, a multi-energy complementary system model is constructed, which includes thermal power, PV, energy storage, electric vehicle (EV) clusters, and demand response. Then, a planning model centered on economy is established. Through multi-energy coordinated optimization, supply–demand balance and cost control are achieved. The simulation results based on the port microgrid of the LEKKI Port in Nigeria show that the proposed method can significantly reduce system operating costs by 18% and improve the PV accommodation rate through energy storage time-shifting, flexible EV scheduling, and demand response incentives. The research findings provide theoretical and technical support for the low-carbon transformation of energy systems in high-volatility load scenarios, such as ports.
Regarding the static voltage stability issue of microgrids, by considering the control of line disconnections to enhance the system load margin, an identification and optimization approach for grid topology control measures based on the parameters of disconnected lines is put forward. Linear sensitivity is employed to scan and filter the measures; nonlinear fitting is utilized for ranking the measures; the leading control measures are calculated to determine the optimal line disconnection control measure. With the real lines and equipment conditions of LEKKI Port in Nigeria as a reference, experiments and simulations are conducted using ETAP and tested in the actual engineering of the port. The results indicate that the optimization method can significantly reduce the time required for load margin calculations in the project, and the effect of the method is similar to that of the traditional continuation power flow (CPFLOW) method. The method is more suitable for the application of online algorithms, which requires speed.