In this paper, a novel adaptive continuous sliding mode (SM) control approach is proposed based on the robust stability analysis of buck converters with multi-disturbances. Instead of the traditional first-order SM methods, the twisting algorithm is adopted to realize the control continuity and further weaken their inherent chattering problem. By introducing the zero-crossing detection innovatively, the influence of the traditional twisting algorithm with fixed control gain led to the low precision is effectively eliminated, and the small region can be controlled due to the implementation of the adaptive time-varying control gain. In addition, the magnitude of the controller can be reduced to a minimal admissible level determined by the system stable conditions and the selection of optimization parameters. Furthermore, multiple model uncertainties and external disturbances are considered into the modeling of the buck converters and the proposed adaptive SM controllers to ensure the strong robustness of the whole system while suffering possible disturbances. Finally, comparative simulations and experiments are given to validate the effectiveness of the proposed adaptive control strategy.
6 January 2023 in International Journal of Control, Automation, and Systems
In this paper, a uniform quantization design method for the parallel DC-DC converter network control system (NCS) is proposed in combination with sliding mode control (SMC) strategy to solve the problem that the performance of the system is poor due to the inability to process long signals in time. Taking the parallel buck converter as an example, firstly, the master-slave current sharing SM controller of the parallel buck converter is designed. Then, the NCS containing the designed SM controller is uniformly quantized in the continuous domain, and the stability performance of the system is analyzed according to the quantization error. Considering the application of the parallel buck converter in the actual digital control system, the discretization effect of the uniform quantization SMC system is studied by using a zero-order hold (ZOH) and the stability conditions of the discrete quantization system are given. Finally, the state trajectories and output performances of the system under different parameters in the continuous domain and discrete domain are analyzed by simulations, and the correctness and reliability of the uniform quantization SMC system designed in this paper are further verified by experiments.
1 February 2024 in International Journal of Control, Automation, and Systems
To tackle the problems of high scheduling costs and low photovoltaic (PV) accommodation rates in port microgrids, which are caused by the coupling of uncertainties in new energy output and load randomness, this paper proposes an optimized scheduling method that integrates scenario analysis with multi-energy complementarity. Firstly, based on the improved Iterative Self-organizing Data Analysis Techniques Algorithm (ISODATA) clustering algorithm and backward reduction method, a set of typical scenarios that represent the uncertainties of PV and load is generated. Secondly, a multi-energy complementary system model is constructed, which includes thermal power, PV, energy storage, electric vehicle (EV) clusters, and demand response. Then, a planning model centered on economy is established. Through multi-energy coordinated optimization, supply–demand balance and cost control are achieved. The simulation results based on the port microgrid of the LEKKI Port in Nigeria show that the proposed method can significantly reduce system operating costs by 18% and improve the PV accommodation rate through energy storage time-shifting, flexible EV scheduling, and demand response incentives. The research findings provide theoretical and technical support for the low-carbon transformation of energy systems in high-volatility load scenarios, such as ports.