Classical and quantum space-to-ground communications necessitate highly sensitive receivers capable of extracting information from modulated photons to extend the communication distance from near-earth orbits to deep space explorations. To achieve gigabit data rates while mitigating strong background noise photons and beam drift in a highly attenuated free-space channel, a comprehensive design of a multi-functional detector is indispensable. In this study, we present an innovative compact multi-pixel superconducting nanowire single-photon detector array that integrates near-unity detection efficiency (91.6%), high photon counting rate (1.61 Gcps), large dynamic range for resolving different photon numbers (1–24), and four-quadrant position sensing function all within one device. Furthermore, we have constructed a communication testbed to validate the advantages offered by such an architecture. Through 8-PPM (pulse position modulation) format communication experiments, we have achieved an impressive maximum data rate of 1.5 Gbps, demonstrating sensitivities surpassing previous benchmarks at respective speeds. By incorporating photon number information into error correction codes, the receiver can tolerate maximum background noise levels equivalent to 0.8 photons/slot at a data rate of 120 Mbps—showcasing a great potential for daylight operation scenarios. Additionally, preliminary beam tracking tests were conducted through open-loop scanning techniques, which revealed clear quantitative dependence indicating sensitivity variations based on beam location. Based on the device characterizations and communication results, we anticipate that this device architecture, along with its corresponding signal processing and coding techniques, will be applicable in future space-to-ground communication tasks.
Efficiently fabricating a cavity that can achieve strong interactions between terahertz waves and matter would allow researchers to exploit the intrinsic properties due to the long wavelength in the terahertz waveband. Here we show a terahertz detector embedded in a Tamm cavity with a record Q value of 1017 and a bandwidth of only 469 MHz for direct detection. The Tamm-cavity detector is formed by embedding a substrate with an Nb5N6 microbolometer detector between an Si/air distributed Bragg reflector (DBR) and a metal reflector. The resonant frequency can be controlled by adjusting the thickness of the substrate layer. The detector and DBR are fabricated separately, and a large pixel-array detector can be realized by a very simple assembly process. This versatile cavity structure can be used as a platform for preparing high-performance terahertz devices and opening up the study of the strong interactions between terahertz waves and matter.
We study the nonlinear optical response in a superconducting NbN thin film with a strong terahertz (THz) wave. In. addition to the expected third-harmonic generation, we observe a transient oscillation which softens in frequency with temperature increasing towards the superconducting transition temperature . We identify this feature as transient Higgs oscillation. To verify this proposal, we introduce a time-frequency resolved technique, a spectrogram for visualizing the THz spectrum. The dynamic decaying behavior of the oscillation is observed, which is consistent with the theoretical expectation of intrinsic Higgs oscillation. Moreover, we observe a higher-order nonlinear optics effect, i.e., fifth-harmonic generation, which we assign to the higher-order coupling between the Higgs mode and electromagnetic field.
30 April 2019 in Superconductor Science and Technology
A series superconducting nanowire single-photon detector is a high performance nanowire array detector that has the potential to reach a high system detection efficiency (SQE), a high counting rate (CR) and photon number resolving functionality. Interconnected with a simplified readout, it shows promise for large scale expansion and has good prospects for future applications in single-photon imaging, quantum optics, quantum computing and deep-space communication. In this paper, we demonstrate a high SQE and CR series superconducting nanowire single-photon detector with an active area of 20 × 20 μ m 2 . The detector shows a maximum SQE of 68% at 1550 nm with a dark count rate of 200 Hz and a wide response wavelength from 1100–2000 nm. It also achieves a CR over 300 MHz at single photon power level and has the capability of resolving photon numbers by up to six photons.
10 March 2017 in Superconductor Science and Technology
Terahertz (THz) direct detectors based on superconducting niobium nitride (NbN) hot electron bolometers (HEBs) and biased by a simple microwave (MW) source have been studied. The frequency and power of the MW are selected by measuring the MW responses of the current–voltage (I–V) curves and resistance–temperature (R–T) curves of the NbN HEBs. The non-uniform absorption theory is used to explain the current jumps in the I–V curves and the resistance jumps in the R–T curves. Compared to the thermal biasing, the MW biasing method can improve the sensitivity, make the readout system much easier and consumes less liquid helium, which is important for long lasting experiments. The noise equivalent power (NEP) of 1.6 pW Hz−1/2 and the response time of 86 ps are obtained for the detectors working at 4.2 K and 0.65 THz.