Microwave sensors can probe intrinsic material properties of analytes in a microfluidic channel at physiologically relevant ion concentrations. While microwave sensors have been used to detect single cells and microparticles in earlier studies, the synergistic use and comparative analysis of microwave sensors with optical microscopy for material classification and size tracking applications have been scarcely investigated so far. Here we combined microwave and optical sensing to differentiate microscale objects based on their dielectric properties. We designed and fabricated two types of planar sensor: a Coplanar Waveguide Resonator (CPW) and a Split-Ring Resonator (SRR). Both sensors possessed sensing electrodes with a narrow gap to detect single cells passing through a microfluidic channel integrated on the same chip. We also show that standalone microwave sensors can track the relative changes in cellular size in real-time. In sensing single 20-micron diameter polystyrene particles, Signal-to-Noise ratio values of approximately 100 for CPW and 70 for SRR sensors were obtained. These findings demonstrate that microwave sensing technology can serve as a complementary technique for single-cell biophysical experiments and microscale pollutant screening.
Brownian motion imposes a hard limit on the overall precision of a nanomechanical measurement. Here, we present a combined experimental and theoretical study of the Brownian dynamics of a quintessential nanomechanical system, a doubly clamped nanomechanical beam resonator, in a viscous fluid. Our theoretical approach is based on the fluctuation-dissipation theorem of statistical mechanics: we determine the dissipation from fluid dynamics; we incorporate this dissipation into the proper elastic equation to obtain the equation of motion; and the fluctuation-dissipation theorem then directly provides an analytical expression for the position-dependent power spectral density (PSD) of the displacement fluctuations of the beam. We compare our theory to experiments on nanomechanical beams immersed in air and water and obtain excellent agreement. Within our experimental parameter range, the Brownian-force noise driving the nanomechanical beam has a colored PSD due to the “memory” of the fluid; the force noise remains mode independent and uncorrelated in space. These conclusions are not only of interest for nanomechanical sensing but also provide insight into the fluctuations of elastic systems at any length scale.
24 October 2024 in Journal of Lightwave Technology
Ultrasound is widely used in medical imaging, and emerging photo-acoustic imaging is crucial for disease diagnosis. Currently, high-end photo-acoustic imaging systems rely on piezo-electric materials for detecting ultrasound waves, which come with sensitivity, noise, and bandwidth limitations. Advanced applications demand a large matrix of broadband, high-resolution, and scalable ultrasound sensors. Silicon photonic circuits have been introduced to meet these requirements by detecting ultrasound-induced deformation and stress in silicon waveguides. Although higher sensitivities could facilitate the exploration of new applications, the high stiffness of the waveguide materials constrains the intrinsic sensitivity of the silicon photonic circuits to ultrasound signals. Here, we explore the impact of the mechanical properties of a polymer cladding on the sensitivity of silicon photonic ultrasound sensors. Our model and experiments reveal that optimizing the polymer cladding's stiffness enhances the resonance wavelength sensitivity. Experimentally, we show a fourfold increase in the sensitivity compared to the sensors without a cladding polymer and, a twofold sensitivity increase compared to the sensors with a cladding polymer of saturated cross-linking density. Interestingly, comparing experiments with the optomechanical model suggests that the change in Young's Modulus alone cannot explain the sensitivity increase. In conclusion, polymer-coated silicon photonic ultrasound sensors exhibit potential for advanced photo-acoustic imaging applications. It offers the prospect of increasing the ultrasound detection sensitivity of silicon photonic ultrasound sensors while using CMOS-compatible processes. This paves the way to integrate the polymer-coated silicon photonic ultrasound sensors with electronics to utilize the sensors in advanced medical imaging applications.
Photonic ultrasound sensors promise unparalleled spatial and temporal resolution in ultrasound imaging due to their size-independent noise figure, high sensitivity, and broad bandwidth. Optical materials can further improve performance and stability, but achieving small size, high sensitivity, and wide bandwidth remains challenging. This work introduces amorphous silicon carbide (a-SiC) for ultrasound sensing, offering strong optical confinement, low propagation loss, and high stability for miniaturized microring sensors. We demonstrate a compact detection system with a 20-transducers linear array coupled to a single bus waveguide. The sensors achieve an optical finesse of 1320 and intrinsic sensitivity of 78 fm kPa −1 , leading to a noise-equivalent pressure below 55 $${{{\rm{mPa}}}}/\sqrt{{{{\rm{Hz}}}}}$$ , calibrated from 3.36 MHz to 30 MHz. High-resolution imaging of fine structures validates real-world applicability. a-SiC is also easily integrated on most substrates due to its low deposition temperature. Our results position a-SiC as a promising solution for optical ultrasound sensing, combining miniaturization, low-loss, and high-sensitivity.
Amorphous silicon carbide (a-SiC) has emerged as a compelling candidate for applications in integrated photonics, known for its high refractive index, high optical quality, high thermo-optic coefficient, and strong third-order nonlinearities. Furthermore, a-SiC can be easily deposited via CMOS-compatible chemical vapor deposition (CVD) techniques, allowing for precise thickness control and adjustable material properties on arbitrary substrates. Silicon nitride (SiN) is an industrially well-established and well-matured platform, which exhibits ultra-low propagation loss, but it is suboptimal for high-density reconfigurable photonics due to the large minimum bending radius and constrained tunability. In this work, we monolithically combine the a-SiC with SiN photonics, leveraging the merits of both platforms, and achieve the a-SiC/SiN heterogeneous integration with an on-chip interconnection loss of (0.28+0.44−0.28) dB and integration density increment exceeding 4444-fold. By implementing active devices on the a-SiC, we achieve 27 times higher thermo-optic tuning efficiency, with respect to the SiN photonic platform. In addition, the a-SiC/SiN platform gives the flexibility to choose the optimal fiber-to-chip coupling strategy depending on the interfacing platform, with efficient side-coupling on SiN and grating-coupling on the a-SiC platform. The proposed a-SiC/SiN photonic platform can foster versatile applications in programmable and quantum photonics, nonlinear optics, and beyond.