The features of uranium mining on Kazakhstan’s enterprises have been examined, and uranium deposits located in the Syrdarya and Shu-Sarysu depressions have been described. Actual and projected data on the development of technological blocks in areas with complex geological structures have been analyzed and compared. Core samples were collected and, using X-ray diffraction analysis, quantitative and qualitative characteristics as well as mineral compositions of ores from various productive horizons of uranium deposits in the Syrdarya and Shu-Sarysu depressions were comparatively analyzed. It was determined that the ores in the Syrdarya depression are relatively homogeneous compared to those in the Shu-Sarysu depression, although in some places, clay minerals and gypsum are present, which hinder the uranium leaching processes. In the ores of the Shu-Sarysu depression, clay minerals that impede the uranium leaching processes are present in certain areas. Microscopic analysis of core material samples using a LEICA DM 2500 P microscope revealed particle sizes and shapes, as well as their distribution within the structure of host rocks in the productive horizon. Using X-ray diffraction analysis, mineral compositions of sediment-forming components during uranium well mining in the considered productive horizons were determined and comparatively analyzed. It was established that in the geotechnological wells of the Syrdarya depression, sediments of predominantly chemical origin, such as gypsum, are formed. However, in the geotechnological wells of the Shu-Sarysu depression, sediments of mechanical origin, consisting predominantly of quartz particles and clay minerals, are formed. Based on the obtained data, a method for intensifying underground uranium leaching in complex geological conditions has been developed, which involves dissolving sediment formations and increasing the oxidative–reductive potential of the leaching solution. The proposed and experimentally substantiated universal methodology for enhancing uranium well production involves the dissolution and prevention of precipitation using hydrofluoric acid solutions, as well as the oxidation of uranium dioxide with hydrogen peroxide.

The aim of this study was to improve the efficiency of in situ uranium leaching by developing a specialized methodology for selecting rational parameters for the chemical treatment of production wells. This approach was designed to enhance the filtration properties of ores and extend the uninterrupted operation period of wells, considering the clay content of the productive horizon, the geological characteristics of the ore-bearing layer, and the composition of precipitation-forming materials. The mineralogical characteristics of ore and precipitate samples formed during the in situ leaching of uranium under various mining and geological conditions at a uranium deposit in the Syrdarya depression were identified using an X-ray diffraction analysis. It was established that ores of the Santonian stage are relatively homogeneous and consist mainly of quartz. During well operation, the precipitates formed are predominantly gypsum, which has little impact on the filtration properties of the ore. Ores of the Maastrichtian stage are less homogeneous and mainly composed of quartz and smectite, with minor amounts of potassium feldspar and kaolinite. The leaching of these ores results in the formation of gypsum with quartz impurities, which gradually reduces the filtration properties of the ore. Ores of the Campanian stage are heterogeneous, consisting mainly of quartz with varying proportions of clay minerals and gypsum. The leaching of these ores generates a variety of precipitates that significantly reduce the filtration properties of the productive horizon. Effective compositions and concentrations of decolmatant (clog removal) solutions were selected under laboratory conditions using a specially developed methodology and a TESCAN MIRA scanning electron microscope. Based on a scanning electron microscope analysis of the samples, the effectiveness of a decolmatizing solution based on hydrochloric and hydrofluoric acids (taking into account the concentration of the acids in the solution) was established for the destruction of precipitate formation during the in situ leaching of uranium. Geological blocks were ranked by their clay content to select rational parameters of decolmatant solutions for the efficient enhancement of ore filtration properties and the prevention of precipitation formation. Pilot-scale testing of the selected decolmatant parameters under various mining and geological conditions allowed the optimal chemical treatment parameters to be determined based on the clay content and the composition of precipitates in the productive horizon. An analysis of pilot well trials using the new approach showed an increase in the uninterrupted operational period of wells by 30%–40% under average mineral acid concentrations and by 25%–45% under maximum concentrations with surfactant additives in complex geological settings. As a result, an effective methodology for ranking geological blocks based on their ore clay content and precipitate composition was developed to determine the rational parameters of decolmatant solutions, enabling a maximized filtration performance and an extended well service life. This makes it possible to reduce the operating costs of extraction, control the geotechnological parameters of uranium well mining, and improve the efficiency of the in situ leaching of uranium under complex mining and geological conditions. Additionally, the approach increases the environmental and operational safety during uranium ore leaching intensification.