Dongmei Wang

Dr. Dongmei Wang

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2023 in SPE Journal
Verified
Journal Article
Closed access
PDF file
RSRandall Seright
Randall Seright
DWDongmei Wang
Dongmei Wang
Summary: At the Milne Point polymer flood (North Slope of Alaska), polymer retention is dominated by the clay, illite. Illite, and kaolinite cause no delay in polymer propagation in Milne Point core material, but they reduce the effective polymer concentration and viscosity by a significant amount (e.g., 30%), thus reducing the efficiency of oil displacement until the full injected polymer concentration is regained [which requires several pore volumes (PVs) of throughput]. This work demonstrates that polymer retention on illite is not sensitive to monovalent ion concentration, but it increases significantly with increased divalent cation concentration. The incorporation of a small percentage of acrylamido tertiary butyl sulfonic acid (ATBS) monomers into hydrolyzed polyacrylamide (HPAM) polymers is shown to dramatically reduce retention. The results are discussed in context with previous literature reports. Bridging adsorption was proposed as a viable mechanism to explain our results. Interestingly, an extensive literature review reveals that polymer retention (on sands and sandstones) is typically only modestly sensitive to the presence of oil. Extensive examination of the literature on inaccessible pore volume (IAPV) suggests the parameter was commonly substantially overestimated, especially in rock/sand more permeable than 500 md (which comprises the vast majority of existing field polymer floods).

27 June 2022 in Geofluids
Verified
Journal Article
Open access
PDF file
DWDongmei Wang
Dongmei Wang
SNShane Namie
Shane Namie
RSRandall Seright
Randall Seright
Effective oil displacement from a reservoir requires adequate and properly directed pressure gradients in areas of high oil saturation. If the polymer bank is too large or too viscous during a polymer flood, the pressure drops from the injection well to the polymer front may act as a pressure modification or barrier by usurping most of the downstream driving force for oil displacement. Polymer injection pressures must be limited. The maximum allowable injection pressure is commonly constrained by caprock integrity, injection equipment, and/or regulations, even though fractures can be beneficial to polymer injectivity. This paper examines when the pressure-barrier concept limits the size and viscosity of the polymer bank during a polymer flood. Analytical and numerical methods are used to address this issue. We examine the relevance of the pressure modification concept for a wide variety of circumstances, including oil viscosities ranging from 10 cp to 1650 cp, vertical wells versus horizontal wells, single versus multiple layered reservoirs, permeability contrast, and crossflow between layers. We also examine the relation between the pressure-barrier concept and fractures and fracture extension during polymer injection. We demonstrate that in reservoirs with single layers, the pressure-barrier concept only limits the optimum viscosity of the injected polymer if the mobility of the polymer bank is less than the mobility of the displaced oil bank. The same is true for multizoned reservoirs with no crossflow between layers. Thus, for these cases, the optimum polymer viscosity is likely to be dictated by the mobility of the oil bank, unless other factors intervene. For multizoned reservoirs with free crossflow between layers, the situation is different. A compromise must be reached between injected polymer viscosity and the efficiency of oil recovery. This work is particularly relevant to viscous oil reservoirs where polymer viscosities are substantially lower than the oil viscosity.

20 March 2025 in SPE Journal
Verified
Journal Article
Closed access
MJMD JAKARIA
MD JAKARIA
KLKegang Ling
Kegang Ling
DWDongmei Wang
Dongmei Wang
JCJosh Crowell
Josh Crowell
DZDanzhu Zheng
Danzhu Zheng
Summary: Oilfield produced water (PW), a byproduct of extracting petroleum, often contains salt and other significant critical elements like lithium (Li). Utilizing these elements provides a chance to enhance revenue streams in the petroleum industry while also tackling sustainability challenges. This research provides a thorough economic analysis of the extraction of critical elements, specifically Li, from PW in the Bakken Formation using the NanoLiSal recovery model. The research aims to evaluate the expenses of project design, anticipate revenue, outline implementation processes, and analyze the environmental impacts using economic analysis strategies to assess the NanoLiSal approach while offering future strategies for applying it. Essential elements comprise financial modeling, investigation of industry trends, and assessments of environmental impact. Economic analysis results provide valuable information on the viability of the recovery process, emphasizing patterns, obstacles, and potential advantages. In this paper, we provide a comprehensive analysis of the economic environment, offering useful insights into future research and potential real-world applications. We presents a clear project framework that outlines the costs and revenue associated with the NanoLiSal recovery process. The results highlight the potential for the petroleum industry to generate additional revenue from disposable waste water while also supporting sustainability objectives. This paper contributes by addressing key economic factors and providing practical guidance for stakeholders in the sector.

10 November 2025 in Processes
Verified
Journal Article
Open access
PDF file
OOOlufemi Sunday Oni
Olufemi Sunday Oni
YJYun Ji
Yun Ji
DWDongmei Wang
Dongmei Wang
FBFarhad Abdollahzadeh Bina
Farhad Abdollahzadeh Bina
GDGuodong Du
Guodong Du
In geothermal systems, polymer injection is vital for improving the sweep efficiency of fluid, but the critical challenge is managing the fluid flow in severely fractured systems. Developing stable plugging agents for these systems is a recurring challenge, allowing the loss of the fluid into the large fractures, hence making the recovery very difficult. The fluid is crucial for several applications like power generation, heating, and cooling without producing any toxic emissions. This study presents a gel system formulated with hydroxyethyl cellulose, and a HMTA–resorcinol crosslinker system for harsh conditions of temperature and salinity. The study employed a Central Composite Design (CCD) for optimizing gel formulation. The system achieved optimal conditions at a gelation time of 0.5 h, and the properties were investigated. The experimental outcomes reveal that the polymer gel can exhibit excellent stability under harsh conditions, withstanding temperatures up to 352 °C. This confirms the robustness of the plugging agent at elevated temperatures. This study offers a sustainable and efficient solution for fluid flow control in severely fractured geothermal systems.

31 August 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
KSKenneth Sorbie
Kenneth Sorbie
RSRandall Seright
Randall Seright
ABAlan Beteta
Alan Beteta
DWDongmei Wang
Dongmei Wang
CSCelia Melo da Silva
Celia Melo da Silva
A polymer transport and kinetic adsorption model is developed and applied to assist in the understanding of some recent results in polymer flow though porous media. The coupled equations in dimensionless form show that the system is governed by 3 dimensionless numbers, 2 of which are important, the Adsorption number (NAd) and the adsorption Damköhler number (NDa-A). This leads to a wide range of behaviours in terms of the polymer effluent profiles which are in broad qualitative agreement with experimental observations. The hypothesis is that it is the kinetics of the system (principally NDa-A) that is strongly controlling the experimental observations. The model also predicts that the way to establish if this is true, is to conduct polymer core flood including “shut-in” stages where flow is stopped, then resumed after some period of time, depending on the kinetic adsorption timescale. Preliminary experiments support this and a following paper will present these experimental results directly simulated using our model.

7 July 2021 in Journal of Petroleum Science and Engineering
Verified
Journal Article
Closed access
JZJin Zhang
Jin Zhang
DWDongmei Wang
Dongmei Wang