Andrés Jesús Yáñez-Pacios

Dr. Andrés Jesús Yáñez-Pacios


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 June 2018 in Polymers
Verified
Journal Article
Open access
PDF file
AYAndrés Jesús Yáñez-Pacios
Andrés Jesús Yáñez-Pacios
Jose Miguel Martin-MartinezJose Miguel Martin-Martinez
Jose Miguel Martin-Martinez
Wood plastic composites (WPCs) have poor adhesion properties due to their high surface concentration in non-polar polymers. In this work, two different plasma surface treatments, low pressure plasma (LPP) and atmospheric pressure plasma jet (APPJ), are proposed to increase the surface energy and adhesion property of WPC made with polyethylene (PE-WPC). After optimizing the conditions for each plasma surface treatment, the surface modifications and adhesion of PE-WPC treated with LPP and APPJ were compared. The optimal surface modifications of PE-WPC were obtained by treatment with Argon (Ar): Oxygen (O2) LPP for 90 s, and with air APPJ by using a plasma nozzle-WPC surface distance of one centimeter and speed of platform of one meter per minute. Both plasma treatments produced similar chemical modifications and surface energies on the PE-WPC surface. The ablation was more important for Ar:O2 LPP treatment, and the air APPJ treatment produced more extensive chemical modifications and more homogeneously removal of the wood component of the surface, rendering the polymer surface smoother. Adhesion of PE-WPC was similarly improved by treatment with both plasmas, from 56 N/m in the as-received to 92–102 N/m in the plasma treated PE-WPC joints. The influence of ageing at 24 °C and 40% relative humidity of the adhesive joints made with PE-WPC surface and treated with Ar:O2 LPP and APPJ plasmas was studied. In the joints made with plasma-treated PE-WPC aged under open air for more than one day, the adhesion decreased. An adhesive strength near to that of the joint made with the as-received PE-WPC was obtained after six days. However, if the adhesive joint was created immediately after plasma treatment and peeled at different times, the adhesion was maintained and even increased, and the hydrophobic recovery of the plasma-treated PE-WPC surface was inhibited.

1 October 2017 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
JJJ. A. Jofre-Reche
J. A. Jofre-Reche
MFMonica Fuensanta
Monica Fuensanta
AYAndrés Jesús Yáñez-Pacios
Andrés Jesús Yáñez-Pacios
MCM. Colera
M. Colera
FRF. Rodriguez
F. Rodriguez
Jose Miguel Martin-MartinezJose Miguel Martin-Martinez
Jose Miguel Martin-Martinez
The paper deals with the improvement of adhesion, abrasion resistance, and aging of polyurethane coatings made with polycarbonate diol (PCD) intended for internal pipelines. The influence of the polyol nature on the properties and aging resistance of polyurethane coatings synthesized at laboratory scale using polyether glycol and PCD is determined. The use of PCD or mixtures of 50% by weight polyether glycol (PTMEG) and 50% by weight PCD in the synthesis of the polyurethane coatings strongly reduces the amount of material removed by abrasion. On the other hand, the use of 40% by weight PTMEG and 60% by weight PCD increases the mechanical properties of the polyurethanes and their pull-off strength values in joints made with steel substrate. After aging by immersion in water at 70°C for two weeks, the reduction of pull-off strength in the joint made with the polyurethane made with PTMEG and with a PCD and PTMEG mixture is similar but the loci of failure are different. Only the polyurethane coating prepared with 40% by weight PTMEG and 60% by weight PCD mixture shows a cohesive failure in the coating.