Seismic data interpolation and reconstruction play an important role in seismic data processing. Seismic data are often inadequately sampled along various spatial axes. We have developed a new approach to interpolate aliased multidimensional seismic data based on the multidimensional adaptive prediction-error filter in frequency domain. First, we estimate the adaptive prediction-error filter coefficients, then interpolate missing traces using the estimated coefficients. Shaping regularization is used to control the smoothness of frequency-domain multidimensional adaptive prediction-error filter coefficients. Instead of estimating prediction-error filter coefficients only along one direction space, we estimate the prediction-error filter coefficients using more information along different direction spaces. So, multidimensional adaptive prediction-error filter using regularized nonstationary autoregression can adaptively estimate seismic events whose slopes vary in multidimensional space. The frequency-domain multidimensional interpolation method can input data at temporal frequency, which can save computer memory and time. For multidimensional seismic data, which miss different number of traces regularly in different axes, the proposed method can be used to interpolate missing traces to obtain more accurate results. The proposed method improves the calculation efficiency by applying shaping regularization and implementation in the frequency domain. The applicability and effectiveness of the proposed method are examined by synthetic and field data examples.
Seismic attenuation is one of the main factors responsible for degradation of the resolution of seismic data. During seismic wave propagation in attenuation medium, the energy of signal components seriously decreases, especially those with higher frequencies. The seismic attenuation and resolution reduction are generally compensated for with inverse Q filtering in the frequency or time domain. However, the implementation of pre-stack inverse Q filtering is challenging because the traveltime in each layer is not easy to obtain for the pre-stack seismic gather, unless the accurate velocity model is known. In this study, we propose an inverse Q filtering method for the pre-stack seismic gather that uses the local slope and warped mapping to determine the propagation path, and Taylor-expansion-based division is used to stabilize the inversion. The local slope can determine the reflection events with the same ray path, and the inverse warped mapping can transform the attenuation factor from the |${t_0} - p$| (zero-offset traveltime to ray parameter) domain to the |$t - x$| (traveltime and offset) domain. The attenuation factor in the |${t_0} - p$| domain is easy to calculate because the traveltimes and Q values in each layer are known. The proposed oriented pre-stack inverse Q filtering method is velocity-independent and suitable for a depth varying Q model. The synthetic and real data examples demonstrated that the method can effectively correct the attenuation and dispersion of seismic waves, and can obtain pre-stack seismic gathers with high resolution.
8 August 2022 in IEEE Transactions on Geoscience and Remote Sensing
Low-frequency information in seismic data can improve seismic resolution and imaging accuracy, enhance the quality of inversion, and play an essential role in imaging algorithms such as full-waveform inversion (FWI). Sufficiently low-frequency data can avoid the cycle skipping phenomenon during FWI. During seismic data processing, the protection and reconstruction for low-frequency information are therefore of great importance. In this article, we systematically investigate the extrapolation of prestack viscoacoustic seismic low-frequency data using a dense convolutional network (DenseNet) to effectively establish the nonlinear relationship between high- and low-frequency data and realize the extrapolation and reconstruction of viscoacoustic 0–5-Hz low-frequency data using 5–30-Hz high-frequency component. The generalizability of the method for different influencing factors such as wavelets, noise, and models is analyzed using the Marmousi2 velocity model forward data. It is demonstrated that the method has high robustness and can be applied to different situations, and the accuracy is higher than that of the traditional convolutional neural network (CNN) method. The feasibility of the low-frequency extrapolation method based on DenseNet is also verified by synthetic data, physical experiment simulation data, and field data testing and is superior to the traditional CNN method.
Acoustic impedance (AI) inversion plays a vital role in seismic interpretation because AI contains valuable information on lithology and contributes to reservoir characterization. However, the effect of anelastic attenuation dissipates the energy and distorts the phase of seismic waves during their propagation in the earth. Such attenuation-induced effects will degrade the quality of AI inversion unless some preprocessing routines are performed in advance (e.g., inverse Q filtering). In order to invert for AI from nonstationary seismic data directly and enhance the lateral continuity, we have developed a robust Q-compensated multidimensional AI inversion method. The proposed method incorporates the Q-filtering operator into the conventional convolution model and provides an improved iteration scheme, which can avoid some of the errors introduced by those compensation-related processing routines. Furthermore, with the help of seislet nonlinear shaping regularization, the proposed method can accelerate the convergence rate during inversion and further improve the lateral continuity and accuracy of the final inverted results in the presence of noise. Synthetic and field data have been used to validate the effectiveness and robustness of the proposed method. The results demonstrate that compared with the conventional method, the proposed method can retrieve AI from nonstationary seismic data directly with improved efficiency and remove those possible artifacts caused by ambient noise.
Full-waveform inversion (FWI) has been proven as an effective method to estimate subsurface parameters by iteratively reducing the data residual between the predictions and the observations. Nevertheless, FWI is greatly dependent on the initial model, and a poor initial model will lead to an incorrect solution. Furthermore, owing to the anelasticity of the earth, seismic waves will attenuate during propagation, which results in an attenuated gradient and makes the convergence rate of FWI even worse in viscoacoustic medium. Commonly, multiparameter (e.g. velocity and Q) waveform inversion can be used to mitigate these problems. Benefiting from the theory of Q-compensated wavefield propagation, we develop a Q-compensated joint multiparameter waveform inversion method to weaken the nonlinearity of the FWI objective function, which enables it to cope with challenges related with attenuation-induced gradient energy loss and cycle skipping simultaneously. We refer to our Q-compensated joint multiparameter FWI scheme as QJMFWI. The main contributions of QJMFWI are as follows: (1) given the difficulty associated with the estimation of velocity and Q simultaneously in viscoacoustic media, QJMFWI provides a straightforward waveform inversion method for velocity and Q model construction, by which we can obtain velocity and Q information with improved accuracy and resolution; and (2) compared with conventional FWI methods, QJMFWI relaxes the requirement for a good initial velocity and Q model, which can avoid trapping into local minima. Numerical and field data examples demonstrate that QJMFWI is an effective method to invert for accurate subsurface parameters in viscoacoustic media.
29 July 2022 in Journal of Geophysics and Engineering
Full-waveform inversion (FWI) acts as an effective technique to estimate subsurface parameter by iteratively reducing the difference between the predictions and the observations. The classic FWI suffers from the problem of converging to the local minimum when the starting model is poor, which is known as the notorious cycle skipping phenomenon. Moreover, due to the anelasticity of the earth, seismic waves always suffer from energy dissipation and phase distortion while their propagation, which leads to an attenuated gradient for FWI, decelerates the convergence rate of the inversion processing. We have proposed a new method referred to as Q-compensated nonstationary phase-corrected FWI (QNPCFWI) to compensate for the attenuation-induced gradient energy loss and the phase mismatch caused by the less-accurate initial velocity model and phase dispersion simultaneously in viscoacoustic medium. We incorporated attenuation compensation mechanism and nonstationary phase correction method for improved inversion efficiency in the case that a poor initial model is used. The main points of this paper can be concluded as follows: (i) we compensate the lost energy for gradient calculation during wave propagation for improved inversion efficiency. (ii) As we know, Q model estimation for real data is challenging and an accurate Q model is hard to get. The proposed QNPCFWI can also work using an approximate Q model. (iii) The proposed method has the ability to mitigate cycle skipping even if the low-frequency components of seismic data are absent. Numerical examples validate the effectiveness and efficiency of our proposed method.