Low-frequency information in seismic data can improve seismic resolution and imaging accuracy, enhance the quality of inversion, and play an essential role in imaging algorithms such as full-waveform inversion (FWI). Sufficiently low-frequency data can avoid the cycle skipping phenomenon during FWI. During seismic data processing, the protection and reconstruction for low-frequency information are therefore of great importance. In this article, we systematically investigate the extrapolation of prestack viscoacoustic seismic low-frequency data using a dense convolutional network (DenseNet) to effectively establish the nonlinear relationship between high- and low-frequency data and realize the extrapolation and reconstruction of viscoacoustic 0–5-Hz low-frequency data using 5–30-Hz high-frequency component. The generalizability of the method for different influencing factors such as wavelets, noise, and models is analyzed using the Marmousi2 velocity model forward data. It is demonstrated that the method has high robustness and can be applied to different situations, and the accuracy is higher than that of the traditional convolutional neural network (CNN) method. The feasibility of the low-frequency extrapolation method based on DenseNet is also verified by synthetic data, physical experiment simulation data, and field data testing and is superior to the traditional CNN method.
Acoustic impedance (AI) inversion plays a vital role in seismic interpretation because AI contains valuable information on lithology and contributes to reservoir characterization. However, the effect of anelastic attenuation dissipates the energy and distorts the phase of seismic waves during their propagation in the earth. Such attenuation-induced effects will degrade the quality of AI inversion unless some preprocessing routines are performed in advance (e.g., inverse Q filtering). In order to invert for AI from nonstationary seismic data directly and enhance the lateral continuity, we have developed a robust Q-compensated multidimensional AI inversion method. The proposed method incorporates the Q-filtering operator into the conventional convolution model and provides an improved iteration scheme, which can avoid some of the errors introduced by those compensation-related processing routines. Furthermore, with the help of seislet nonlinear shaping regularization, the proposed method can accelerate the convergence rate during inversion and further improve the lateral continuity and accuracy of the final inverted results in the presence of noise. Synthetic and field data have been used to validate the effectiveness and robustness of the proposed method. The results demonstrate that compared with the conventional method, the proposed method can retrieve AI from nonstationary seismic data directly with improved efficiency and remove those possible artifacts caused by ambient noise.
Full-waveform inversion (FWI) has been proven as an effective method to estimate subsurface parameters by iteratively reducing the data residual between the predictions and the observations. Nevertheless, FWI is greatly dependent on the initial model, and a poor initial model will lead to an incorrect solution. Furthermore, owing to the anelasticity of the earth, seismic waves will attenuate during propagation, which results in an attenuated gradient and makes the convergence rate of FWI even worse in viscoacoustic medium. Commonly, multiparameter (e.g. velocity and Q) waveform inversion can be used to mitigate these problems. Benefiting from the theory of Q-compensated wavefield propagation, we develop a Q-compensated joint multiparameter waveform inversion method to weaken the nonlinearity of the FWI objective function, which enables it to cope with challenges related with attenuation-induced gradient energy loss and cycle skipping simultaneously. We refer to our Q-compensated joint multiparameter FWI scheme as QJMFWI. The main contributions of QJMFWI are as follows: (1) given the difficulty associated with the estimation of velocity and Q simultaneously in viscoacoustic media, QJMFWI provides a straightforward waveform inversion method for velocity and Q model construction, by which we can obtain velocity and Q information with improved accuracy and resolution; and (2) compared with conventional FWI methods, QJMFWI relaxes the requirement for a good initial velocity and Q model, which can avoid trapping into local minima. Numerical and field data examples demonstrate that QJMFWI is an effective method to invert for accurate subsurface parameters in viscoacoustic media.
Seismic waves always suffer from amplitude dissipation and phase distortion and such attenuation-induced effects will degrade the quality of seismic data. Therefore, a slew of research on attenuation compensation has been proposed to correct the attenuation effects and improve the resolution of the original data. In recent years, geophysicists have paid more attention to prestack compensation because prestack data contain more information about the subsurface medium. However, it is challenging to implement prestack compensation for which the traveltime of prestack data is difficult to be determined unless an accurate velocity model is available. Furthermore, prestack data usually contains more noises and the signal-to-noise ratio (S/N) of prestack data is lower, which is more prone to noise amplification during compensation. To improve the performance of prestack compensation, we have developed a robust structure-oriented multichannel prestack compensation method. We incorporate an additional adaptive structure regularization to stabilize the processing of compensation. We refer to our structure-constrained multichannel prestack compensation method as the SCMPC method. With the help of adaptive structure regularization, our method has a superior ability to suppress those artifacts caused by ambient noises and enhance the consistency of effective signals during compensation. Compared with classic single-channel prestack compensation methods, this SCMPC method can provide a better result with higher accuracy and S/N. We use synthetic and field examples to further validate the good performance of our method.
29 July 2022 in Journal of Geophysics and Engineering
Full-waveform inversion (FWI) acts as an effective technique to estimate subsurface parameter by iteratively reducing the difference between the predictions and the observations. The classic FWI suffers from the problem of converging to the local minimum when the starting model is poor, which is known as the notorious cycle skipping phenomenon. Moreover, due to the anelasticity of the earth, seismic waves always suffer from energy dissipation and phase distortion while their propagation, which leads to an attenuated gradient for FWI, decelerates the convergence rate of the inversion processing. We have proposed a new method referred to as Q-compensated nonstationary phase-corrected FWI (QNPCFWI) to compensate for the attenuation-induced gradient energy loss and the phase mismatch caused by the less-accurate initial velocity model and phase dispersion simultaneously in viscoacoustic medium. We incorporated attenuation compensation mechanism and nonstationary phase correction method for improved inversion efficiency in the case that a poor initial model is used. The main points of this paper can be concluded as follows: (i) we compensate the lost energy for gradient calculation during wave propagation for improved inversion efficiency. (ii) As we know, Q model estimation for real data is challenging and an accurate Q model is hard to get. The proposed QNPCFWI can also work using an approximate Q model. (iii) The proposed method has the ability to mitigate cycle skipping even if the low-frequency components of seismic data are absent. Numerical examples validate the effectiveness and efficiency of our proposed method.
Random noise in seismic records affects the accuracy of effective signal identification, making it difficult for subsequent seismic data processing, imaging, and interpretation. Therefore, random noise attenuation has always been an important step in seismic data processing, especially for 3D data. In recent years, multicomponent exploration has been developed rapidly. However, the common method for processing multicomponent data is to process each component separately resulting in the correlation between multicomponent data being neglected. For 3D multicomponent data, we develop a multicomponent adaptive prediction filter (MAPF) based on noncausal regularized nonstationary autoregressive models to implement random noise attenuation in the t-x-y domain. The MAPF for multicomponent signals can be used to identify the potential correlations and differences between each pair of components, providing not only a robust analysis of the individual components but also effective information about the consistency and differences between each component with more information and constraints compared with traditional 1C prediction. Moreover, it can obtain smooth nonstationary prediction coefficients by solving the least-squares problem with shaping regularization. The example results demonstrate that the MAPF method is superior to the traditional adaptive prediction filtering method. Furthermore, because the multicomponent method requires more coefficients and takes a longer time to predict than the 1C method, we further develop a fast MAPF (FMAPF) combining the data pooling and coefficient reconstruction strategies. The example results demonstrate that the FMAPF method is effective at denoising and greatly improves computational efficiency. The method comes with a slight decrease in computational accuracy.