Of all industrial sectors, the construction industry accounts for about 37% of carbon dioxide (CO2) emissions. This encompasses the complete life cycle of buildings, from the construction phase to service life to component disposal. The main source of emissions of climate-damaging greenhouse gases such as CO2, with a share of 9% of global emissions, is the production of ordinary cement as the main binder of concrete. The use of innovative approaches such as impregnated carbon yarns as non-corrosive reinforcement embedded in concrete has the potential to dramatically reduce the amount of concrete required in construction, since no excessive concrete cover is needed to protect against corrosion, as is the case with steel reinforcement. At the same time, architectural design options are expanded via this approach. This is achieved above all using novel robotic manufacturing technologies to enable no-cut direct fiber placement. This innovative technological approach to fabricating 2D and 3D biologically inspired textiles, including non-metallic structures for textile-reinforced concrete (TRC) components, will promote an automatable construction method that reduces greenhouse gas emissions. Furthermore, the impregnated yarn which is fabricated enables the production of load-adapted and gradual non-metallic reinforcement components. Novel and improved design strategies with innovative reinforcement patterns allow the full mechanical potential of TRC to be realized. The development of a robotic fabrication technology has gone beyond the state of the art to implement spatially branched, biologically inspired 3D non-metallic reinforcement structures. A combined robotic fabrication technology, based on the developed flexible 3D yarn-guiding and impregnation module and a 3D yarn fixation module, is required to implement this sophisticated approach to fabricate freely formed 3D non-metallic reinforcement structures. This paper presents an overview of the development process of the innovative technological concept.
Continuous load monitoring of fiber-reinforced composites represents a complex challenge for the composite sector. In this paper, the development and characterization of piezoelectric sensors for structural health monitoring applications based on polyvinylidene fluoride (PVDF) are presented. The basic sensor structures are melt spun bicomponent filaments in a core-sheath configuration. The core is a volumetric mixture of polypropylene (PP) and Pre-Elec PP, a PP-compound modified with carbon black. The sheath is made of PVDF. Three variants with increasing volumetric Pre-Elec ratio in the core (50 vol.%, 60 vol.% and 70 vol.%) are manufactured and analyzed by conducting optical and resistance measurements as well as tensile tests. In the subsequent process step, the bicomponent filaments are braided with copper fine wires. The PP core and copper braiding of the coaxial tricomponent yarn are used as inner and outer electrode, respectively. By generating an electrostatic high voltage field between these electrodes, the PVDF interlayer is subjected to contact polarization to initialize the piezoelectric effect. The piezoelectric characteristics and thereby the sensory potential of the produced sensor yarns are quantified and analyzed on the fiber and composite scale by investigating their piezoelectric behavior during cyclic tensile tests. The results of the different sensor yarn variants are compared with each other by evaluating the measured voltage signal as a function of the induced cyclic stresses.
Robotic coreless filament winding (CFW) of high‐performance materials in 3D geometries presents a promising avenue for advancing lightweight and civil engineering. However, the unique challenges posed by CFW necessitate the development of novel path planning algorithms. Traditional slicing techniques, commonly used in regular 3D printing, are inadequate due to the complexities of filament winding processes and the utilization of materials with exceptional mechanical properties. In this article, we propose an innovative approach to automate 3D robotic CFW. The key focus of our work lies in overcoming the limitations of conventional algorithms and addressing the specific boundary conditions associated with diverse applications. Our method builds upon Hierholzer's algorithm that is then expanded to accommodate the intricate constraints of CFW. We achieve a comprehensive path planning framework capable of navigating complex 3D geometries while optimizing the utilization of high‐performance materials. This approach allows efficient and precise CFW, preserving the excellent mechanical properties of the materials. Furthermore, the generated path is automatically converted into a robot program. The procedure to automatically convert a designed part to an executable robot program can be used in various sectors, including aerospace, automotive, and construction industry. This facilitates the utilization of high‐performance fiber composites in lightweight engineering applications in the future.
This research addresses the challenging task of monitoring the structural integrity of fiber-reinforced composite (FRC) components under complex loading conditions. Ensuring the safety and functionality of these components is critical but economically challenging. Therefore, this study presents an innovative approach using textile-based strain sensors that are cost-effective and structurally compatible with carbon fiber-reinforced plastic (CFRP) components. The investigation includes the systematic electromechanical characterization and comparison of four different sensor materials at the yarn and composite scale in various test scenarios. Cyclic tensile, compression, and bending tests of CFRP specimens are performed and show good reproducibility of sensor signals within the elastic range, with significant agreement observed with applied strain measurement methods, particularly in tensile tests. Although there are minor deviations in compression and bending evaluations, the signals are still meaningful for in-situ detection of complex loading patterns, crack initiation, and structural failure. The study demonstrates that the integration of textile-based sensor yarns allows for continuous structural health monitoring (SHM) of CFRP components under various loading scenarios, including tensile, bending, and especially compressive loads.
Textile‐integrated strain sensors enable close‐to‐body motion monitoring, but performance depends strongly on textile architecture. Embroidered and weft‐knitted Smart Kinesiotapes incorporating the same silver‐plated polyamide yarn are compared using five specimens per configuration under cyclic elongation in increments up to . The effects of sensor geometry, sensing‐path length and knitting orientation on base resistance, drift and relative resistance change are evaluated. Vertical orientation reduces one‐line base resistance from to , corresponding to , and four‐line base resistance from to , corresponding to . Compared with the corresponding vertical structures, the relative resistance changes of the horizontal one‐ and four‐line variants are and lower, respectively. The vertical variants provide distinct cyclic signals and close temporal agreement with the applied strain. For the embroidered sensors, the straight geometry provides the largest response, whereas extending the sensing path to four lines increases base resistance without amplifying the relative response. The one‐line vertically knitted sensor provides the most promising combination of low base resistance, high sensitivity and signal interpretability. These findings provide design guidance for body‐conforming textile strain sensors.