Amanda de Castro Juraski

Dr. Amanda de Castro Juraski

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 April 2017 in Materials
Verified
Journal Article
Open access
PDF file
AJAmanda de Castro Juraski
Amanda de Castro Juraski
ARAndrea Rodas
Andrea Rodas
HAMADA ELSAYEDHAMADA ELSAYED
HAMADA ELSAYED
Enrico BernardoEnrico Bernardo
Enrico Bernardo
VSViviane Oliveira Soares
Viviane Oliveira Soares
JDJuliana Daguano
Juliana Daguano
Ca-Mg silicates are receiving a growing interest in the field of bioceramics. In a previous study, wollastonite-diopside (WD) glass-ceramics were successfully prepared by a new processing route, consisting of the heat treatment of a silicone resin embedding reactive oxide particles and a Ca/Mg-rich glass. The in vitro degradation, bioactivity, and cell response of these new WD glass-ceramics, fired at 900–1100 °C for 1 h, as a function of the Ca/Mg-rich glass content, are the aim of this investigation The results showed that WD glass-ceramics from formulations comprising different glass contents (70–100% at 900 °C, 30% at 1100 °C) exhibit the formation of an apatite-like layer on their surface after immersion in SBF for seven days, thus confirming their surface bioactivity. The XRD results showed that these samples crystallized, mainly forming wollastonite (CaSiO3) and diopside (CaMgSi2O6), but combeite (Na2Ca2Si3O9) crystalline phase was also detected. Besides in vitro bioactivity, cytotoxicity and osteoblast adhesion and proliferation tests were applied after all characterizations, and the formulation comprising 70% glass was demonstrated to be promising for further in vivo studies.

1 May 2025 in Biomedical Materials
Verified
Journal Article
Open access
AJAmanda de Castro Juraski
Amanda de Castro Juraski
Victor Allisson da SilvaVictor Allisson da Silva
Victor Allisson da Silva
RSRuchi Sharma
Ruchi Sharma
AAAdriano Rodrigues Azzoni
Adriano Rodrigues Azzoni
Stephanie WillerthStephanie Willerth
Stephanie Willerth
The formulation of bioinks is critical for successful 3D bioprinting. It influences printability, stability, and cell behavior. One of the main demands in 3D bioprinting is the development of bioink formulations that can balance long-term cell viability and compositional similarities to the extracellular matrix (ECM) with rheological properties for 3D printing. To address this challenge, this study tested new bioinks using carboxymethyl chitosan (N,O-CMCS or O-CMCS), alginate, and fibrin, which are promising biomaterials due to their biocompatibility and likeness to the ECM. 3D bioprinting of neural tissues comes with additional challenges because neural cells are highly sensitive to environmental conditions. Therefore, we optimized our bioink formulations for the 3D bioprinting of neural progenitor cells derived from human induced pluripotent stem cells (hiPSC-NPC). Here we report a neural tissue constructed 3D bioprinted with a hiPSC-NPC-laden 1% N,O-CMCS, 1% alginate, and 20 mg ml−1 fibrin. This formulation exhibited uniform consistency and minimal extrusion force fluctuations (approximately 8 KPa), indicating homogeneity and optimal printability using an extrusion-based bioprinter. In contrast, O-CMCS formulations did not support neural tissue differentiation while higher concentrations of N,O-CMCS or alginate (3% w/v) resulted in increased viscosity and poorly defined scaffolds. The optimized bioink demonstrated significant water retention, swelling up to 15 times its original weight without losing structural integrity, thus providing a conducive environment for cell culture. Live/dead staining revealed over 60% cell viability over 30 d, underscoring its suitability for long-term cell applications. Immunocytochemistry confirmed that the optimized N,O-CMCS-based bioink effectively guided cells toward further differentiation into neurons and astrocytes, thus forming a 3D bioprinted construct that is able to replicate different neural cell types found in the neural tissue. The optimized bioink described in this study lays the groundwork for future works that will focus on detailing how different CMCS groups affect tissue maturation and functionality in 3D bioprinted constructs that can potentially be used for future neural tissue modeling and drug screening.

11 July 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
DPDebora Pagliuso
Debora Pagliuso
Adriana GrandisAdriana Grandis
Adriana Grandis
AJAmanda de Castro Juraski
Amanda de Castro Juraski
AAAdriano Rodrigues Azzoni
Adriano Rodrigues Azzoni
MPMaria de Lourdes T. M. Polizeli
Maria de Lourdes T. M. Polizeli
MBMarcos Silveira Buckeridge
Marcos Silveira Buckeridge
Climate change resulting from human development necessitates increased land use, food, and energy consumption, underscoring the need for sustainable development. Incorporating various feedstocks into value-added liquid fuels and bioproducts is essential for achieving sustainability. Most biomass consists of cell walls, which serve as a primary carbon source for bioenergy and biorefinery processes. This structure contains a cellulose core, where lignin and hemicelluloses are crosslinked and embedded in a pectin matrix, forming diverse polysaccharide architectures across different species and tissues. Nineteen agro-industrial waste products were analyzed for their potential use in a circular economy. The analysis included cell wall composition, saccharification, and calorific potential. Thermal capacity and degradation were similar among the evaluated wastes. The feedstocks of corn cob, corn straw, soybean husk, and industry paper residue exhibited a higher saccharification capacity despite having lower lignin and uronic acid contents, with cell walls comprising 30% glucose and 60% xylose. Therefore, corn, soybeans, industrial paper residue, and sugarcane are more promising for bioethanol production. Additionally, duckweed, barley, sorghum, wheat, rice, bean, and coffee residues could serve as feedstocks for other by-products in green chemistry, generating valuable products. Our findings show that agro-industrial residues display a variety of polymers that are functional for various applications in different industry sectors.

23 May 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
DPDebora Pagliuso
Debora Pagliuso
Adriana GrandisAdriana Grandis
Adriana Grandis
AJAmanda de Castro Juraski
Amanda de Castro Juraski
AAAdriano Rodrigues Azzoni
Adriano Rodrigues Azzoni
MPMaria de Lourdes T. M. Polizeli
Maria de Lourdes T. M. Polizeli
MBMarcos Silveira Buckeridge
Marcos Silveira Buckeridge
Climate change resulting from human development necessitates increased land use, food, and energy consumption, underscoring the need for sustainable development. Incorporating various feedstock into value-added liquid fuels and bioproducts is essential for achieving sustainability. Most biomass consists of cell walls, which serve as a primary carbon source for bioenergy and biorefinery processes. This structure contains a cellulose core where lignin and hemicelluloses are crosslinked and embedded in a pectin matrix, forming diverse polysaccharide architectures across different species and tissues. Nineteen agro-industrial wastes were analyzed for their potential use in a circular economy. The analysis included cell wall composition, saccharification, and calorific potential. Thermal capacity and degradation were similar among the evaluated wastes. The feedstocks of corn cob, corn straw, soybean husk, and industrial paper residue exhibited a higher saccharification capacity despite having lower lignin and uronic acid contents, with cell walls comprising 30% glucose and 60% xylose. Therefore, corn, soybean, industrial paper residue, and sugarcane are more promising for bioethanol production. Additionally, duckweed, barley, sorghum, wheat, rice, bean, and coffee residues could serve as feedstocks for other by-products in green chemistry, generating valuable products. Our findings show that agro-industrial residues display a variety of polymers that are functional for various applications in different industry sectors.

2 March 2021 in Research, Society and Development
Verified
Journal Article
Open access
PDF file
AJAmanda de Castro Juraski
Amanda de Castro Juraski
DFDaniela Casimiro Figueredo
Daniela Casimiro Figueredo
NDNasser Ali Daghastanli
Nasser Ali Daghastanli
Claudinei dos SantosClaudinei dos Santos
Claudinei dos Santos
MFMaria Helena V Fernandes
Maria Helena V Fernandes
Juliana Kelmy Macário Barboza DaguanoJuliana Kelmy Macário Barboza Daguano
Juliana Kelmy Macário Barboza Daguano
A hipersensibilidade dentinária (HD) é caracterizada pela dor curta e aguda em resposta a estímulos externos, podendo ser tratada pela oclusão dos túbulos dentinários. Neste estudo, vidro original e uma vitrocerâmica do sistema 3CaO.P2O5-SiO2-MgO contendo whitlockita (fase de fosfato tricálcico substituído com Mg) foram avaliados quanto à eficácia no tratamento da HD. Um vidro bioativo com composição 52,75.(3CaO.P2O5)–30SiO2–17,25MgO (%p) foi tratado termicamente a 700°C e 775°C por 4 h. Terceiros molares humanos foram desmineralizados e distribuídos aleatoriamente em grupos: NT - controle negativo (sem tratamento), BG - controle positivo (tratado com Bioglass®45S5), GL - tratamento com vidro original e WGC - tratamento com whitlockita. Em seguida, amostras de dentina foram imersas em saliva artificial e armazenadas por 7 dias a 37ºC. Os biomateriais foram avaliados por Difração de Raios X (XRD) e Microscopia Eletrônica de Varredura (MEV). As amostras de dentina foram analisadas por MEV e ATR-FTIR, para identificar e quantificar variações composicionais na superfície dentinária. Foi identificada whitlockita como fase cristalina do GC, e sua presença leva à formação de partículas arredondadas, conforme mostrado por imagens de MEV. A análise de ATR-FTIR confirmou a formação de apatita na superfície de amostras BG, GL e WGC, o que foi corroborado pela oclusão dos túbulos dentinários, conforme imagens em MEV. As intensidades dos picos de infravermelho foram comparadas estatisticamente. Em relação à reatividade superficial pela análise semiquantitativa de FTIR, o GC demonstrou similaridade com o Bioglass®45S5 indicando que este material é promissor no tratamento de HD.

28 December 2017 in bioRxiv
Verified
Preprint
Open access
PDF file
AJAmanda de Castro Juraski
Amanda de Castro Juraski
The aim of this study is to evaluate the potential of a bioactive glass based on the 3CaO.P 2 O 5 -SiO 2 MgO-system and its glassceramics containing whitlockite on the remineralization of dentin as a possible treatment to dentin hypersensitivity. For that, 40 third molar human teeth were artificially demineralized and randomly distributed in 4 groups (n = 10): G1 - Negative Control (no treatment), G2 - Positive Control (treated by Bioglass® 45S5), G3 – BG (treated by bioactive glass based on 3CaO.P 2 O 5 -SiO 2 -MgOsystem), and G4 – BGC (treated by bioactive whitlockite glass-ceramics). After treatment, the samples were emerged in artificial saliva and stored for 7 days in a controlled temperature of 37ºC. After that, scanning electron microscopy (SEM) and atomic force microscopy (AFM) was used to evaluate samples morphology. The analysis confirmed the formation of hydroxyapatite on the surface of all the biomaterials studied, that in the dentine specimens treated by bioactive glass and whitlockite glas-ceramic most of the dentinal tubules were completely occluded.