The aim of this research was to develop new electrospun membranes (EMs) based on polycaprolactone (PCL) with or without metronidazole (MET)/nano-hydroxyapatite (nHAP) content. New nHAP with a mean diameter of 34 nm in length was synthesized. X-ray diffraction (XRD) and attenuated total reflectance Fourier transform infrared spectroscopy (FTIR-ATR) were used for structural characterization of precursors and EMs. The highest mechanical properties (the force at maximum load, Young’s modulus and tensile strength) were found for the PCL membranes, and these properties decreased for the other samples in the following order: 95% PCL + 5% nHAP > 80% PCL + 20% MET > 75% PCL + 5% nHAP + 20% MET. The stiffness increased with the addition of 5 wt.% nHAP. The SEM images of EMs showed randomly oriented bead-free fibers that generated a porous structure with interconnected macropores. The fiber diameter showed values between 2 and 16 µm. The fiber diameter increased with the addition of nHAP filler and decreased when MET was added. New EMs with nHAP and MET could be promising materials for guided bone regeneration or tissue engineering.

Dental light-curing giomers were developed to combine the favourable properties of diacrylic resin composites (DRCs) and glass-ionomer cements (GICs) in a single material and to eliminate their inherent drawbacks. Giomers are characterized by their aesthetic appearance, high mechanical properties, adhesion to dental tissues as well as fluoride release and recharge abilities. The qualities of the giomers are greatly influenced by the level of conversion of the component resins. Infrared spectroscopy is one of the most largely used techniques for the determination of the degree of conversion in resin-based dental materials. However different results were obtained due to the performances of the used methods. The present work presents the determination of conversion degree in a series of dental copolymers and their corresponding giomers using transmission Fourier transform infrared spectroscopy (FTIR) and an attenuated total reflection technique (ATR) technique, respectively, the main aim being the study of the influence of the materials composition and of the light curing modes upon the achieved conversion in the cured giomers. Beautifil II commercial giomer was used as a control. A halogen lamp and a diode-blue LED lamp were used for the curing of the materials. The results showed that the composition of the resins greatly influenced the conversion. The highest conversions (up to 79%) were obtained in the case of the experimental giomers which contained the experimental Bis-GMA urethane analogue, followed by the Beautifil II giomer (61%) and experimental giomers based on commercial Bis-GMA (up to 50%), respectively. The resins light-cured by using the diode-blue LED lamp presented slightly higher conversions than the resins cured by halogen lamp. The study demonstrates the possibility to evaluate easily and reproducibly the conversion in light-curing composite materials with complex chemical composition and structure, particularly in the case of giomers by using the ATR technique.

The aim of this study was the determination of chromatographic profiles of major whey proteins (WP): α-lactalbumin (α-La), β-lactoglobulin A and B, (β-Lg A and B), bovine serum albumin (BSA) in dairy beverages based on Zonar milk serum. The studied WP were separated by high-performance liquid chromatography (HPLC) on Aeris XB-C18 column using gradient elution with 0.1% trifluoroacetic acid (TFA) in water and 0.1% TFA in 80% acetonitrile, at 214 nm detection. The HPLC method was validated for system suitability, selectivity/specificity, linearity (R2 ≥ 0.996), precision (RSD% ≤ 2.01), trueness (recovery 96.29%-102.08%), sensitivity (limits of quantification (LOQ) 1.35-10.08 μg/mL), and robustness. The total of studied whey proteins (WPT) in dairy beverages based on Zonar milk serum varied between 1.42 g/L and 3.04 g/L. The results obtained were evaluated by principal component analysis (PCA) for correlation between the types of studied dairy beverages (natural and with additives added), the HPLC dataset of four whey proteins and WPT (active variables) to differentiate type of dairy beverages samples. The obtained results confirm that the studied dairy beverages constitute a valuable source of bioactive components with benefits in human healthy nutrition and medical purposes.

Background/Objectives: Polymeric barrier membranes (BMs) are usually used in guided bone regeneration to isolate the bone defect from the surrounding tissue, favoring bone apposition. This study proposes a third-generation BM made of polycaprolactone (PCL), loaded with different concentrations of nano-hidroxyapatite (nHAP) and gentamicin (GEN), and fabricated by electrospinning. Methods: The mechanical properties of the polymer, together with the fabrication procedure, offer porosity with interconnectivity to permit cell adhesion and proliferation. Bacterial contamination of the BM can induce infection at the bone level, leading to unfavorable clinical outcomes of the regeneration procedure. Results: Therefore, BMs have been proposed as carriers for local GEN antibiotic therapy, demonstrating antibacterial properties against S. aureus, S. mutans, and P. aeruginosa, depending on the drug concentration, while being negligibly affected by the nHAP content. X-ray diffraction, FTIR-ATR, and SEM allowed for BM structural characterization, demonstrating the presence of GEN/nHAP and establishing the fiber diameter, which influences the mechanical properties in dry and wet conditions and the drug release behaviorA BM cytotoxicity assessment, performed over 1 and 5 days, revealed that a high nHAP concentration provided protection against cytotoxicity, in contrast to GEN, and that cell proliferation and cell adhesion increased in the presence of nHAP. The BM’s bioactivity was demonstrated by mineralization after 21 days in simulated body fluid in an SEM/EDX analysis. Conclusions: The electrospun 15 wt.% nHAP and 2 wt.% GEN-loaded third-generation BM could be a promising alternative for guided bone regeneration.