Seeking to characterize and mitigate the adverse effects of misalignment in WPT applications, we present the design and construction of a low-cost wireless charger prototype and a novel phase-shift measurement system. The first is built using a half-bridge inverter and antennas with series-series compensation, while a microcontroller (Teensy 4.1) supplies high-frequency PWM signals. The measurement system comprises high-speed operational amplifiers and an exclusive OR gate. A resistor was used as load. On the other hand, the maximum power transfer efficiency occurs at the resonance frequency, nevertheless, this depends physically on the geometry of the coupling system. Using a 3D-printed displacement system, we created controlled vertical misalignments between the coils, thereby obtaining variations in the resonance frequency of the system and consequently, producing a proportional phase shift between the voltage and current waves of the transmitting antenna. As the experimental results demonstrate, the measurement system can process this high-frequency signal for the phase shift estimation and subsequently use it as a control variable in a proportional-integral controller, which adjusts the operation frequency of the system and brings it back to optimal conditions. This precise yet inexpensive implementation could find its application in EVs and biomedical devices’ efficient wireless chargers.
Resonant wireless power transfer (WPT) systems have been evolving and improving their designs over the last few years, looking to efficiently charge electric vehicles, cellphones, and biomedical devices. In this article, we present to the scientific community the data obtained from the optimization of a resonant WPT prototype, operating at different vertical misalignments and load conditions, known to have an impact on the behavior of these type of systems. To maximize the power transferred to the load, we developed a proportional-integral frequency control algorithm that employs the phase-shift between the voltage and current waveforms in the transmitting antenna (resonance indicator) as a setpoint. Data on the performance and control optimization process of the prototype during laboratory tests were acquired using a LabVIEW interface, which was designed to capture information such as the evolution of the frequency, the phase-shift, and the load voltage, from multiple devices (a microcontroller, an oscilloscope, a digital multimeter, and a controllable power supply). The data were organized and presented in tables and graphs using MATLAB. The importance of the dataset relies on the opportunity to utilize the information as a basis for the improvement of the associated electronics by using different transmission topologies, higher speed components, new-generation microcontrollers, and to modelling novel intelligent control algorithms, such as adaptative neuro-fuzzy inference systems.
Control engineering is used in multiple engineering domains, but most introductory courses lean heavily on mathematical manipulation and simulation. This can limit students’ exposure to real-world applications, often at the cost of student engagement. To promote a system-level approach, this work describes OpenMCT, a low-cost, open-source educational kit for DC motor control that enables hands-on experiments covering topics from actuation and sensing to sampling and real-time control execution, while also touching on other engineering topics students encounter in practice, such as drive electronics, measurement conditioning, and filtering. The hardware integrates a brushed DC motor, incremental encoder feedback, motor current sensing, and an H-bridge driver controlled by a Teensy 4 microcontroller. A cross-platform Python/Qt GUI provides configuration, live telemetry, excitation signals, data logging, and interactive controller tuning, including PID and direct entry of z-domain difference-equation coefficients. Validation follows the workflow commonly taught in control courses, going from calibration, characterization, and system identification through to controller design and deployment. Experimental results show that system identification and closed-loop responses follow the trends predicted by the GUI-based analysis and simulations.
Control engineering is used in multiple engineering domains, but most introductory courses lean heavily on mathematical manipulation and simulation. This can limit students’ exposure to real-world applications, often at the cost of student engagement. To promote a system-level approach, this work describes OpenMCT, a low-cost, open-source educational kit for DC motor control that enables hands-on experiments covering topics from actuation and sensing to sampling and real-time control execution, while also touching on other engineering topics students encounter in practice, such as drive electronics, measurement conditioning, and filtering. The hardware integrates a brushed DC motor, incremental encoder feedback, motor current sensing, and an H-bridge driver controlled by a Teensy 4 microcontroller. A cross-platform Python/Qt GUI provides configuration, live telemetry, excitation signals, data logging, and interactive controller tuning, including PID and direct entry of z-domain difference-equation coefficients. Validation follows the workflow commonly taught in control courses, going from calibration, characterization, and system identification through to controller design and deployment. Experimental results are validated using MATLAB-based tools, showing that system identification and closed-loop responses follow the trends predicted by MATLAB simulations.
Ce manuscrit présente les travaux réalisés pour la mise au point d’un système d’estimation du taux d’oxygénation connu aussi sous le nom d’oxymètre de pouls. Ledit outil est indispensable, notamment dans le domaine médical, pour la surveillance des patients lors des interventions anesthésiques, pour les soins post-opératoires et aux urgences puisqu’il fournit de l’information relative à l’efficacité respiratoire et au rythme cardiaque. Le principe d’opération de ce dernier est basé sur la différence en absorption optique entre le sang oxygéné et le sang désoxygéné à l’aide d’une photodiode simple comme moyen de détection. Dans ce travail de recherche, nous introduisons une nouvelle méthode basée sur la différence des spectres d’absorption entre le sang oxygéné et le sang désoxygéné en utilisant un photodétecteur multispectrale.En premier lieu, une introduction et une analyse de l’état de l’art sont faites afin de mieux comprendre la théorie derrière l’oxymétrie de pouls et de mettre en évidence les limitations des méthodes actuelles, ce qui nous permettra de positionner scientifiquement et techniquement les contributions. Ensuite, une explication détaillée du système conçu, concernant l’électronique, l’acquisition et traitement des signaux est décrite.Finalement, nous présentons les résultats obtenus avec la méthode proposée. D’abord, une preuve de concept à plusieurs longueurs d’onde a été faite avec un spectromètre comme moyen de détection afin de valider le principe de fonctionnement de notre méthode. Pour ce faire, nous avons effectué des tests de désoxygénation par rétention de la respiration conjointement avec un oxymètre de haute gamme comme moyen de comparaison. Une fois le principe validé, nous avons remplacé le spectromètre par un capteur multispectrale. Nous avons alors montré que les estimations faites avec notre méthode, en régime stable, tombaient dans la tolérance permise par la norme ISO régulant les oxymètres de pouls.Ces travaux ouvrent une voie alternative et complémentaire à l’étude de l’oxymétrie de pouls capable de surmonter plusieurs limitations présentes dans la technique conventionnelle, en particulier dans le cadre du design d’implants autonomes. Des essais cliniques à venir permettront d’approfondir sur l’utilité de cette méthode et ses limitations.