The modelling of temperature measurements using optical fiber pyrometers for different hot object sizes with new generalized integration limits is presented. The closed equations for the calculus of the radiated power that is coupled to the optical fiber for two specific scenarios are proposed. Accurate predictions of critical distance for avoiding errors in the optical fiber end location depending on fiber types and object sizes for guiding good designs are reported. A detailed model for estimating errors depending on target size and distance is provided. Two-color fiber pyrometers as a general solution are also discussed.
A polarization independent reconfigurable optical demultiplexer with low crosstalk between adjacent channels and high number of potential allocated channels is designed on silicon on insulator technology. On to off state transitions can be implemented by changing the coupling factor or the ring length. Wavelength selective switch units are cascaded to form the demultiplexer. Crosstalks below −30dB with 50GHz channel spacing and losses below 1.5dB in the off state are obtained from simulations. Designs using carrier dispersion effect and power consumption estimations are included.
This article presents a new model of optical power gathered by a fiber-optic pyrometer when there is a tilting angle between the fiber longitudinal axis and the vector perpendicular to the tangent plane of the emitted surface. This optical power depends on the fiber specifications, such as the diameter and the numerical aperture (NA), as well as the object parameters, including its diameter, emissivity, and tilting angle. Some simulations are carried out using other pyrometers from the literature without tilting to validate the model. Additional simulations with different optical fibers, object sizes, and distances at different tilting angles allow us to describe the behavior of the pyrometer when the object is smaller than the optical fiber field of view (the light cone defined by its NA). The results show that for a finite surface object, the power collected by the optical fiber is affected by changes in the tilting angle, greater tilting lesser gathered power, and reaching the maximum power when the field of view of the fiber covers up the entire object, as expected. On the other hand, additional equations are presented to describe the maximum tilting angle, and distance that allow the maximum power gathered for a determined object diameter and fiber, avoiding temperature measurement errors.
In this paper, we report on design rules for optimizing the response of intensity sensors embedded in ring resonators (RR) as part of a frequency based self-referencing method. Time division multiplexing sensor networks require a time response analysis for properly addressing the self-reference sensors. The selected measurement and reference frequencies are multiples of the RR Free Spectral Range to improve signal to noise ratio and avoid RR coupling coefficient (K) tolerance influence on the measurements. A weighting function that models the trade-off between high sensitivity and fast response for defining the operation point in terms of K and ring losses is also given.
El costo del petróleo en el mercado internacional tiene un impacto directo sobre los costos de la energía eléctrica. En Panamá existen mecanismos de corrección, de los precios de la energía eléctrica al por menor para compensar estas variaciones a través del factor de corrección por variación combustible (CVC). Este mecanismo permite que la tarifa eléctrica al por menor se ajuste siguiendo las variaciones del petróleo. En el periodo que abarcó de 2015 a 2019, el precio del petróleo fluctuó mucho, llegando a superar los 75 USD por barril y decreciendo por debajo de los 30 USD por barril. Estas fluctuaciones afectaron los costos de energía en Panamá, aunque no precisamente de la manera que se esperaba según las condiciones establecidas para el mercado eléctrico. Para estudiar este fenómeno se ha construido una base de datos con los coeficientes de la tarifa de energía eléctrica y se ha desarrollado una herramienta de software que permite hacer cálculos de la factura por consumo de energía en el periodo de 2015 a 2019, para clientes del grupo de baja tensión sin demanda (BTS). Con la información recogida se realizó un estudio que determinó que existe una correlación moderada entre el costo del petróleo en el mercado internacional y la factura por consumo eléctrico en Panamá de 0.7 y 0.66 para clientes con consumos de 500 kWh (BTS2) y 1000 kWh (BTS3) respectivamente, cuando el CVC se utiliza, y de 0.366 y 0.365 cuando no se utiliza. Igualmente se encuentra que por cada 100 kWh consumidos, la factura se incrementa (o decrementa) en 7.25 centésimos por cada USD de incremento (o decremento) en el precio del barril de petróleo.
This article presents a model for analyzing the effect of misalignments in the optical power gathered by a single-color fiber-optic off-axis pyrometer when there is a tilting angle between the longitudinal fiber axis and the plane of the emitted surface. The model takes into account the fiber parameters, such as the diameter and the numerical aperture, as well as the target object size and measuring distance. Simulations show the simultaneous influence of tilting angle and lateral displacement. This provides key behavioral insights to guide alignment and calibration, helping to avoid temperature measurement errors in advanced manufacturing. The model allows integration of the emissivity angle dependence. Results show that the influence of lateral misalignment is negligible for values below 15 µm (which is 1/10 of the 150 µm minimum distance) when considering a 160 µm object size and a 60° tilting angle. The displacement influence, for a fixed tilting angle, is higher in specific directions of displacement.