The article presents the results of the computer modelling of yarn winding on conical bobbins based on the analytical method of constructing tubular-shaped surfaces as a partial case of channel surfaces using the vector algebra apparatus. It is stated that the guide line takes the shape of a conical spiral line along which the forming moves (in the form of a circle with a diameter equal to the average diameter of the yarn), and is set using the moving Frenet basis. The obtained mathematical models facilitate the building, in MathCAD 3D visualization graphics, of a tubular-shaped surface, which represents the layers of yarn winding on a conical cartridge, and the reinforced yarn, which comprise the core component and the wrapping component, as well as the determination of both the lengths of individual layers of winding and the total length of winding (not including the transition sections). Well-known methods of forming geometric objects and computer modelling were also used in the work. The theoretical studies are based on the basic principles of textile production technology.
The purpose of the article is to analyze the applicability of modern software for design-projecting of models of jewelry on the example of creation of a 3D model of a flat medallion; such process of creation includes the following steps: development of an algorithm; check for the errors; determination of the main characteristics. When conducting the researches, a set of general scientific approaches has been used, in particular: visual-analytical and system-informational approaches, modern methods of analysis of mechanical systems, as well as the method of classifications. The programs for three-dimensional modeling are listed; the peculiarities of their use and their functional possibilities are revealed. Based on the analysis of peculiarities of design-projecting of jewelry, the applicability of modern software is identified, in particular, the applicability of Rhinoceros 3D commercial software for three-dimensional NURBS-modeling. The development of engineering methods of designing of jewelry. The comparative analysis of programs for design-projecting of jewelry is performed. The proposed algorithm for creation of 3D model of a flat medallion using the Rhinoceros 3D software for three-dimensional NURBS-modeling is described. A standard algorithm for the creation of a 3D model of a flat medallion is developed. The recommendations regarding the use of Rhinoceros 3D software for three-dimensional NURBS-modeling in jewelry are made.
The article analyzes and summarizes the varieties of modern military medical organizers, reveals the characteristic structural, compositional and technological solutions of each type separately. Analyzes and systematizes the materials and accessories for
1 March 2021 in Advances in Science and Technology Research Journal
The purpose of the work is analytical research and computer modeling of the influence of shape and size of console beams of elastic plates of non-base configurations for the cam of the automatic half-hose machine under the conditions of flexibility, strength, and minimization of sizes. The...
29 December 2022 in Herald of Khmelnytskyi National University. Technical sciences
The article considers the technological process of production of the cutting department of a sewing enterprise and the typical equipment used during such a process. It is revealed that the increase in the range of sewing products, the appearance of new materials, the speed of changing models, methods of processing, etc., necessitates a systematic search for rational and effective solutions for the technological process of production, including through the introduction of modern innovative equipment. The most used standard equipment of the cutting department of a sewing enterprise has been analyzed. The main requirements for the equipment involved in the technological process of production of the cutting department of a sewing enterprise have been determined. Also, the ways of possible improvement of the cutting department of a sewing enterprise have been outlined. The object of the research is a typical cutting department of a Ukrainian sewing enterprise, i.e. the technological process of production and the equipment used during such process. The method of system analysis is used. Theoretical studies are based on the main provisions of light industry production technologies. A generalized classification scheme of the standard equipment of the cutting department of a sewing enterprise has been developed, which can be used at light industry enterprises, in particular the cutting department of a sewing enterprise, when choosing energy-efficient and high-tech equipment. Also, the main problems that need to be solved for the successful development of an average sewing enterprise are outlined. The results of the study can be used in the design of new and modernization of existing cutting departments of sewing enterprises.
31 December 2025 in Humanities science current issues