Austin Clark

Mr. Austin Clark

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
ACAustin Clark
Austin Clark
IRIhab Ragai
Ihab Ragai
The research presented herein investigates the impact of axial force and feed rate in the Friction Stir Welding (FSW) of aluminum alloy 6061-T6 in a GROB G552 horizontal 5-axis CNC machine with adaptive torque control enabled. The purpose of this study is to further advance the performance and characteristics of FSW aluminum alloys in 5-axis CNCs, particularly in conjunction with adaptive torque control. The Taguchi and ANOVA methods were utilized to define parameter tables and analyze the resulting data. Optical microscopy and tensile tests were performed on the welded samples to evaluate weld quality. The results from this study provide clear evidence that axial force has a significant effect on tensile strength in FSW AA6061-T6. The maximum UTS found in this study, welded with an axial force of 9.4 kN, retained 69% tensile strength of the base material. Conversely, a decrease in strength and an increase in void formation was found at higher feed rates with this force. Ideal welds, with minimal defects across all feed rates, were performed with an axial force of 8.3 kN. A feed rate of 300 mm/min at this force resulted in a 67% base metal strength. These findings contribute to improving joint strength and application efficiency in FSW AA6061-T6 performed in a horizontal 5-axis CNC machine where adaptive torque control is enabled.

1 January 2025 in Materials Research Proceedings
Verified
Conference Paper
Open access
PDF file
ACAustin Clark
Austin Clark
IRIhab Ragai
Ihab Ragai
GBG. Buffa
G. Buffa
LFL. Fratini
L. Fratini
This article investigates the effects various Friction Stir Welding (FSW) parameters have on the Ultimate Tensile Strength (UTS) of AA3003-H14 joints welded in a horizontal 5-axis CNC. The goal of this research is to combine the use of horizontal 5-axis machining with the ability to FSW in parallel. Two different tools were used in these tests. Both tools had tapered cylindrical pin profiles, while shoulder diameters were 19 mm and 25.4 mm, respectively. Along with the aforementioned tool shoulders, various tool rotation speeds and feed rates were evaluated with tensile tests conducted across 11 variable sets. A constant axial force of 5.2 kN was maintained during welding. A 25.4 mm tool shoulder was found to yield higher UTS than a 19 mm shoulder with the same feed rate and tool rotation speed. While feed rate had some effect on the strength of the weld, tool rotation speed did not have a significant effect on the tensile results in this study. The parameter set with the highest tensile strength in this test was performed with a 25.4 mm tool shoulder, tool rotation speed of 1200 rpm and a feed rate of 100 mm/min.


16 April 2026 in Solid State Phenomena
Verified
Journal Article
Open access
PDF file
EMElizabeth Mamros
Elizabeth Mamros
ACAustin Clark
Austin Clark
PBPhilip R Barnett
Philip R Barnett
IRIhab Ragai
Ihab Ragai
SDShaffer Derek
Shaffer Derek
KJKristofer Laser Jr
Kristofer Laser Jr
The human skull can become fractured or injured through impact and often requires repair through a craniectomy and subsequent cranioplasty, surgery performed to repair defects or damage to the cranium. Challenges related to material choice, which must be biocompatible, and customization for each patient’s anatomy remain. One possible solution is fabrication of patient-specific cranial implants, out of biocompatible polymers, using single point incremental forming (SPIF). In this paper, polyetheretherketone (PEEK) and ultra-high molecular weight polyethylene (UHMWPE) are formed using SPIF at room temperature to manufacture a cranial implant. The SPIF process is used to produce formed parts from which test specimens were extracted to evaluate the tensile performance and thermal properties. Formed cranial implants were impacted using a drop weight to evaluate their suitability under relevant conditions. The geometric conformance of the SPIF process was studied to compare the material behavior for the specified polymers after forming. The results validate that SPIF can be conducted at room temperature with PEEK and UHMWPE biocompatible polymers to enable custom implant manufacturing. However, PEEK exhibited superior performance in terms of tensile strength, geometric conformance, energy absorption, and melting temperature, and is recommended over UHMWPE for future implant applications.

15 April 2026 in Materials Science Forum
Verified
Journal Article
Open access
PDF file
ACAustin Clark
Austin Clark
PBPhilip R Barnett
Philip R Barnett
EMElizabeth Mamros
Elizabeth Mamros
BYBrian Young
Brian Young
IRIhab Ragai
Ihab Ragai
Friction stir welding (FSW) is widely used to bond metals and polymers to create large structures from standardized geometric components. However, FSW has found more limited use in traditional continuous fiber reinforced composites due to the risk of damage to the reinforcing fibers, including fiber misorientation and fragmentation. The process is more amenable to discontinuous fiber composites, which often take the form of injection molding compounds reinforced with short, milled fibers, for which the mechanical performance is significantly degraded. An emerging class of materials, recycled carbon fiber nonwovens, contain long discontinuous fibers that imbue their composites with mechanical performance that bridges the gap between injection molding compounds and continuous fiber laminates, while also decreasing the energy footprint of the materials. This work evaluates this class of materials, alongside injection molding compounds, to develop new insights into the bonding of composite structures using friction stir welding. The bridging effect of discontinuous fibers across the bondline is evaluated using optical microscopy to link processing conditions and fiber length to the resulting performance. Fiber migration was observed in the weld area, though mechanical interlocking was the primary mechanism of bonding in the weld zone. While samples failed at a fraction of the neat materials nominal strength, increased fiber length was found to have a beneficial effect on the apparent tensile and lap shear strength on welds in this study. The new insights gained represent an important step towards the adoption of the FSW process as a means of rapidly manufacturing large composite structures made of carbon fiber/PPS or other fiber-reinforced polymers to enable deployable structures from standardized geometric components.

16 April 2026 in Solid State Phenomena
Verified
Journal Article
Open access
PDF file
EMElizabeth Mamros
Elizabeth Mamros
DSDerek Shaffer
Derek Shaffer
IRIhab Ragai
Ihab Ragai
ACAustin Clark
Austin Clark
Tailor welded blanks (TWB) are commonly used in the automotive industry to achieve heterogeneous components, particularly for creating high strength, lightweight parts. Laser welding is one method for joining TWB. Laser welding was used to create TWB composed of stainless steel 304L, with varied thicknesses, in a “patchwork quilt” pattern forming quadrants within the sample. The mechanical properties and quality of the weld were evaluated via tensile testing and microscopy. Truncated pyramids were then formed with weld seams along the faces, and springback and mechanical properties after forming were analyzed. Optical microscopy revealed that the weld seams remained intact after forming. The weld seam location in the center of the pyramid walls did not have a significant impact on the geometrical accuracy of the formed parts. The results of this study show promise for the use of SPIF with quilted TWB to achieve optimal formed part properties for the intended part application.