Ihab Ragai

Dr. Ihab Ragai


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 September 2017 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Closed access
PDF file
BRBrandt J. Ruszkiewicz
Brandt J. Ruszkiewicz
TGTyler Grimm
Tyler Grimm
IRIhab Ragai
Ihab Ragai
LMLaine Mears
Laine Mears
JRJohn T. Roth
John T. Roth
Increasingly strict fuel efficiency standards have driven the aerospace and automotive industries to improve the fuel economy of their fleets. A key method for feasibly improving the fuel economy is by decreasing the weight, which requires the introduction of materials with high strength to weight ratios into airplane and vehicle designs. Many of these materials are not as formable or machinable as conventional low carbon steels, making production difficult when using traditional forming and machining strategies and capital. Electrical augmentation offers a potential solution to this dilemma through enhancing process capabilities and allowing for continued use of existing equipment. The use of electricity to aid in deformation of metallic materials is termed as electrically assisted manufacturing (EAM). The direct effect of electricity on the deformation of metallic materials is termed as electroplastic effect. This paper presents a summary of the current state-of-the-art in using electric current to augment existing manufacturing processes for processing of higher-strength materials. Advantages of this process include flow stress and forming force reduction, increased formability, decreased elastic recovery, fracture mode transformation from brittle to ductile, decreased overall process energy, and decreased cutting forces in machining. There is currently a lack of agreement as to the underlying mechanisms of the electroplastic effect. Therefore, this paper presents the four main existing theories and the experimental understanding of these theories, along with modeling approaches for understanding and predicting the electroplastic effect.

1 January 2018 in Manufacturing Letters
Verified
Journal Article
Closed access
DSDerek Shaffer
Derek Shaffer
IRIhab Ragai
Ihab Ragai
ADAmir Danesh-Yazdi
Amir Danesh-Yazdi
DLDavid Loker
David Loker

1 April 2019 in Advanced Materials Research
Verified
Journal Article
Closed access
PDF file
DSDerek Shaffer
Derek Shaffer
TGTyler J. Grimm
Tyler J. Grimm
IRIhab Ragai
Ihab Ragai
JRJohn Roth
John Roth
Friction stir welding (FSW) is a solid-state metal fusion process that is characterized by several benefits over comparable processes such as a reduction in energy input and low part distortion. This process has been shown to hold great potential in the fusion of dissimilar metals, a technology highly sought after in the aerospace and automotive industries for its promising weight-reduction capabilities. Furthermore, electrically-assisted FSW (EAFSW) is the supplementation of the FSW process with an electrical current. This modification has been shown to improve many parameters; however, the current literature related to this subject is scarce. Herein, the fusion of Al 6061-T651 to mild steel is performed using EAFSW methods. A novel tool constructed a proprietary ceramic, XSYTIN-1, is also tested in this application. It was found that EAFSW improved material flow between the constituent materials; however, was unable to increase the joint strength of the weld. Additionally, it was found that the XSYTIN-1 tool did not exhibit any significant differences when compared to a conventional steel tool.

1 January 2017 in Procedia Manufacturing
Verified
Journal Article
Open access
TRTravis J. Roney
Travis J. Roney
SMSamantha N. Muhhuku
Samantha N. Muhhuku
CNChetan P. Nikhare
Chetan P. Nikhare
IRIhab Ragai
Ihab Ragai
DLDavid R. Loker
David R. Loker

4 June 2017
Verified
Conference Paper
Closed access
PDF file
TGTyler Grimm
Tyler Grimm
IRIhab Ragai
Ihab Ragai
JRJohn T. Roth
John T. Roth
Electrically assisted incremental sheet forming (EAIF) is a novel addition to the incremental forming (IF) method. One variation of this approach applies direct electrical current during forming. Many improvements over tradition IF can be seen by utilizing this method, to include greater part accuracy, reduced forming force, and greater formability. In order to maximize the effects of electrically assisted incremental forming, all parameters of the method must be investigated, including the polarity of the current passing through the part and the path that the applied current takes. The effects of altering these two parameters is the primary investigation in this research. It was determined that, in order to optimize springback reduction and formability during electrically assisted single point incremental forming, the tool should be assigned the positive electrode and the center of the workpiece should be assigned the negative electrode. Additionally, the mechanism behind the spalling effect inherent to EAIF is discussed.

ACAustin Clark
Austin Clark
IRIhab Ragai
Ihab Ragai
The research presented herein investigates the impact of axial force and feed rate in the Friction Stir Welding (FSW) of aluminum alloy 6061-T6 in a GROB G552 horizontal 5-axis CNC machine with adaptive torque control enabled. The purpose of this study is to further advance the performance and characteristics of FSW aluminum alloys in 5-axis CNCs, particularly in conjunction with adaptive torque control. The Taguchi and ANOVA methods were utilized to define parameter tables and analyze the resulting data. Optical microscopy and tensile tests were performed on the welded samples to evaluate weld quality. The results from this study provide clear evidence that axial force has a significant effect on tensile strength in FSW AA6061-T6. The maximum UTS found in this study, welded with an axial force of 9.4 kN, retained 69% tensile strength of the base material. Conversely, a decrease in strength and an increase in void formation was found at higher feed rates with this force. Ideal welds, with minimal defects across all feed rates, were performed with an axial force of 8.3 kN. A feed rate of 300 mm/min at this force resulted in a 67% base metal strength. These findings contribute to improving joint strength and application efficiency in FSW AA6061-T6 performed in a horizontal 5-axis CNC machine where adaptive torque control is enabled.