Over the last decade, empirical mode decomposition (EMD) has developed into a versatile tool for adaptive, scale-based modal decomposition. EMD has proven to be capable of decomposing multivariate signals with cross-channel mode alignment. However, the algorithms for envelope identification in multivariate EMD come with a computational burden rendering it unsuitable for the large computational demands of multidimensional signal processing. The current work introduces an alternative approach to multivariate EMD, and by combining it with existing fast and adaptive algorithms, paves the way for performing multivariate EMD on multidimensional signals.
Emission reduction in transportation requires advancements in aviation technologies enabling fully electrified propulsion, among which the use of superconducting technologies can provide untapped benefits given their low weight and minimal losses for high-power transmission. However, to enable their use in aircraft electrical power systems, additional considerations for electrical and thermal performance during faults is required in order to meet stringent aircraft safety requirements. In this work, a cryogenically cooled electric aircraft power system is studied under short-circuit conditions for different cooling media. This system consists of a fuel cell, high-temperature superconducting (HTS) transmission line, inverter, and motor, where each of their fault models have been explored. A trade-off study of the impedance of the fuel cell is conducted to identify the values at which the superconducting cable remains thermally stable after a short-circuit fault, as it is crucial that the cable does not experience a thermal runaway.
High-lift multi-element airfoils, such as those used on large transport aircraft during takeoff and landing, can generate strong adverse pressure gradients that, while the surface flow is attached, can cause off-the-surface separation in the wake: so-called wake bursting. The sudden expansion and thickening of the separated wakes has been shown to decrease lift and increase drag. Wake bursting was experimentally studied over a three-element high-lift airfoil, and unsteady velocity measurements were taken with a split-film probe. The tests were performed in the University of Illinois at Urbana–Champaign low-speed low-turbulence subsonic wind tunnel on a multi-element airfoil with a chord length of 1.35 ft (0.411 m) and a model span of 2.8 ft (0.85 m). Results for a Reynolds number of 1.0×106 indicate that wake bursting was observed for the wake of the main element and the first flap. A methodology was developed to numerically define the core of each wake both upstream and downstream of the burst point. Dat...
26 November 2024 in Progress in Aerospace Sciences