The pouring of sand casting is accompanied by severe heat conduction, and there is an urgent need to investigate the pyrolysis properties of foundry sand. The main purpose of this study was to investigate the pyrolysis behaviors of resin sand, including precoated sand (PCS), hot box sand (HBS), and warm box sand (WBS), at heating rates of 20 °C/min, 30 °C/min, and 40 °C/min in nitrogen and air atmospheres. The mass loss of the resin sand was monitored continuously with a simultaneous thermal analyzer, and the kinetic parameters of the resin sand were calculated based on the Coats–Redfern method and thermal data. The average mass loss of the resin sand during pyrolysis was 3.03%, which was much smaller than that of the other sands. The volatile release characteristic index of resin sand could not be calculated based on this concept. To solve this issue, the term Tstv/mloss was established, and its value was determined. With increasing heating rates from 20 °C/min to 30 °C/min and from 30 °C/min to 40 °C/min, the mass losses of the resin sand increased by 0.79% and 0.64%, respectively, and the volatile release characteristic indices of the resin sand increased by 3.8 × 10−10 and 1.06 × 10−9, respectively. In addition, the mass losses and volatile release characteristic indices of resin sand in an air atmosphere were greater than those in a nitrogen atmosphere. With increasing heating rate, the activation energy of the resin sand decreased in a nitrogen atmosphere. The findings concerning the thermal decomposition behaviors of resin sand provided a theoretical basis for the pouring step of the sand casting process.
In the digital transformation era, understanding the relationship between digital and real economies is vital for regional development. This study analyses the interaction between these two economies in Henan Province using panel data from 18 cities (2011–2023). It incorporates policy support intensity through fuzzy set theory, applies an integrated weighting method to measure development levels, and uses regression models to assess the digital economy’s impact on the real economy. The coupling coordination degree model, kernel density estimation, and Gini coefficient reveal the coordination status and spatial distribution, while the ecological Lotka–Volterra model identifies the symbiotic patterns. The key findings are as follows: (1) The digital economy does not directly determine the state of the real economy. For example, cities such as Zhoukou and Zhumadian have low digital economy levels but high real economy levels. However, the development of the digital economy promotes the real economy without signs of diminishing returns. (2) The two economies are generally coordinated but differ spatially, with greater coordination in the Central Plains urban agglomeration. (3) The digital and real economies exhibit both collaboration and competition, with reciprocal mutualism as the dominant mode of integration. These insights provide guidance for policymakers and offer a new perspective on the integration of both economies.
Excessive cavity pressure may result in a sand casting explosion, and corresponding measures should be adopted to prevent these consequences. In this study, the pressure variations in the cavity were first investigated based upon on-site testing by taking the resin contents into consideration, and then the evolution characteristics of sand casting explosion accidents were analyzed in depth by system dynamics, chaos theory, and the bow-tie model. When the resin contents are 1.3 wt%, 1.4 wt%, and 1.5 wt%, the pressures of the gas vent increase by 27.0 Pa, 32.8 Pa, and 35.6 Pa, respectively. To reduce the pressure of the cavity, the resin content should be reduced. The evolutionary process of sand casting explosion accidents has a noticeable butterfly effect and randomness, whose occurrence is comprehensively affected by human, object, environment, management and emergency subsystems. The leading causes of sand casting explosion accidents mainly include the extensive gas evolution characteristics of foundry sand, cavity exhaust blockage, and inadequate safety monitoring. The leading consequences of sand casting explosion accidents mainly include casualties, secondary disasters, and social panic. The implications of these findings concerning sand casting explosion accidents can be regarded as the foundation for accident prevention in practice.
This study develops an integrated risk assessment framework to trace the evolution from multi-factor coupling to systemic failure, using coal mine rock burst as a case study. First, a fault tree containing 56 basic events is established from statistical analysis of accident cases from 2010 to 2024. Expert judgment is then combined with fuzzy theory to assign probabilities to basic events, which are further analyzed through a Bayesian Network. Next, differentiated importance measures, including Birnbaum Importance and Fussell–Vesely Importance, are calculated at multiple levels, and gray relational analysis is used to identify the most critical basic events. Results show that management-related factors, particularly insufficient monitoring and inadequate hazard identification, play dominant roles in risk propagation. The Bow-Tie model is subsequently applied to examine inadequate hazard identification in greater depth and to propose targeted preventive measures. Finally, by integrating the comprehensive accident model with chaos theory across the four dimensions of human, machine, environment, and management, the study reveals the internal mechanism of disaster evolution under multi-factor coupling. Validation against objective data confirms the reliability of both probability assignment and critical-event identification.