Anechoic coatings, attached to the surface of underwater vehicles, are an effective way to absorb the incident sound from active sonars. It is well known that a homogeneous viscoelastic material layer with limited thickness does not provide significant sound absorption performance, thus, anechoic coatings embedded with air cavities are being used for underwater applications. Previous optimization works on this type of anechoic coating mainly focused on the geometrical parameters, position and shape of the internal cavity, while ignoring the influence of the material distribution configuration. In this research, we propose a topology optimization formulation that can directly determine the optimal material layout. A method combining the Bloch theory and finite element method (FEM) is adopted to analyze the sound characteristics of a unit cell model, which is able to represent the whole periodic structure. The proposed optimization formulation employs a reflection coefficient to form the objective function under zero transmission backing conditions. Sensitivity analysis is explicitly presented for the utilization of the typical gradient based optimization method. Finally, numerical examples are provided to demonstrate the validity and significant enhancement in the absorptive performance of anechoic coatings achieved by the proposed methodology. The influence of material distribution on macro level and further research emphases on low frequency reduction are also discussed.
In this study, a new type of 2D piezoelectric phononic crystal with a square hollow and convex structures is designed and established. A theoretical study of the piezoelectric phononic crystal is presented in this article to investigate the transmission properties of waves in terms of complex dispersion relations. Based on the finite discretization technique and plane wave expansion, the formula derivation of the real band structure is achieved as well as the complex band diagrams are obtained. The numerical results are presented to demonstrate the multiple broadband complete bandgaps produced by the designed piezoelectric phononic crystal and the propagation characteristics of the elastic waves for different directions. In addition, the transmission loss in the ΓX direction is calculated to verify the band structure. Finally, the effects of the thickness and the square hollow side length on the band structure are discussed.
22 November 2010 in Journal of Vibration and Control
Modal models are developed for vibro-acoustic response computation of fluid-structure interaction problems on the basis of modal frequencies and modal damping ratios. The uncoupled equations are built using in vacuo mode shapes and fluid-loaded undamped real mode shapes and are solved for the coupled response of the fluid-loaded structures. Conventional modal analysis techniques are used to obtain the response of the coupled fluid-structure systems from a reduced-order modal model. The accuracy and efficiency of the technique is demonstrated with examples of computing the vibro-acoustic response of a baffled thin plate and a baffled thick stiffened plate. The comparisons in terms of mean-square normal velocity and sound power between the present models and the conventional coupling method show a good agreement. The present modal models for computing the vibro-acoustic response of the fluid-loaded structures have the advantages of constructing a model from modal parameters that could be obtained from either numerical computation or experimental measurement; a small dimension of using only a very small number of modes; and of being applicable to conventional modal analysis techniques. These features may make the present technique a powerful tool for dynamics and the control of fluid-loaded structures.