Lithium ion batteries are a proven technology for automotive applications and their continued use in the future electric vehicle fleet is undeniable. In addition to battery performance and durability, battery safety is paramount to ensure confidence and widespread adoption of electromobility in our society. This comprehensive review aims at presenting the various international standards and regulations for safety testing of lithium ion batteries in automotive applications under various abusive environments. Safety tests are presented and analysed including mechanical, electrical, environmental and hazards of chemical nature. The intention of this review is compiling the most relevant standards and regulations to identify shortcomings and areas for future improvement.JRC.C.1-Energy Storag
We predict the scattering loss in rectangular high index-contrast waveguides, using a new variation of the classical approach of coupled-mode theory. The loss predicted by this three-dimensional (3-D) model is considerably larger than that calculated using previous treatments that approximate the true 3-D radiation modes with their two-dimensional counterparts. The 3-D radiation modes of the ideal waveguide are expanded in a series of cylindrical harmonics, and the coupling between the guided and radiation modes due to the sidewall perturbation is computed. The waveguide attenuation can then be calculated semianalytically. It is found that the dominant loss mechanism is radiation rather than reflection, and that the transverse electric polarization exhibits much larger attenuation than transverse magnetic polarization. The method also gives simple rules that can be used in the design of low-loss optical waveguides. The structural properties of sidewall roughness of an InGaAs/InP pedestal waveguide are measured using atomic force microscopy, and the measured attenuation is found to compare well with that predicted by the model
This study aims at analyzing the response of Li-ion cells and at identifying the hazards and governing phenomena from hard to soft external short circuit conditions. 10 Ah pouch cells and 4.5 mAh coin cells were short circuited while synchronized current, potential and temperature signals, audio, IR and visual video recordings were registered. The anode, cathode and separator harvested from the cells were characterized by Scanning Electron Microscopy, micro X-ray Computed Tomography and 3D-profilometry. The complex short circuit behavior obtained can be described by 3 regions: In the first region 274C-rate is observed which is mainly governed by the cell's double and diffusion layer discharge. In the second region, the current drops significantly to 50–60C-rate where mass transport becomes the current limiting factor. The maximum temperature (77–121 °C) is reached and cell rupture, venting and electrolyte leakage may occur. In the final, third region the current decline continues due to the decaying electromotive force. The normalized external/internal resistance ratio is found to be the main influential factor on current and hazards rather than the external resistance or the capacity of the cell. The implications on the relevance and fitness-for-purpose of external short circuit test in standards are outlined.JRC.C.1-Energy Storag
The Sustainability Assessment of Second Life Applications of Automotive Batteries (SASLAB) exploratory research project of the European Commission’s Joint Research Centre (JRC) aims at developing and applying a methodology to analyse the sustainability of deploying electrified vehicles (xEV) batteries in second use applications. A mapping of industrial demonstration and publicly-funded research projects in the area is presented, followed by an experimental assessment of the capacity and impedance change of lithium-ion cells during calendar and cycle ageing. Fresh cells and cells aged in the laboratory, as well as under real-world driving conditions, have been characterised to understand their application-specific remaining lifetime, beyond the 70% to 80% end-of-first-use criterion. For this purpose, pre-aged cells were examined under duty-cycles that resemble those of second use grid-scale applications.