Abdulrahman Obaid Alenezi

Dr. Abdulrahman Obaid Alenezi

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 July 2025 in Energies
Verified
Journal Article
Open access
PDF file
Jafar MasriJafar Masri
Jafar Masri
MIMohammad Ismail
Mohammad Ismail
AAAbdulrahman Obaid Alenezi
Abdulrahman Obaid Alenezi
This paper presents a simulation framework for evaluating power flow, energy efficiency, thermal behavior, and energy consumption in electric vehicles (EVs) under standardized driving conditions. A detailed Simulink model is developed, integrating a lithium-ion battery, inverter, permanent magnet synchronous motor (PMSM), gearbox, and a field-oriented control strategy with PI-based speed and current regulation. The framework is applied to four standard driving cycles—UDDS, HWFET, WLTP, and NEDC—to assess system performance under varied load conditions. The UDDS cycle imposes the highest thermal loads, with temperature rises of 76.5 °C (motor) and 52.0 °C (inverter). The HWFET cycle yields the highest energy efficiency, with PMSM efficiency reaching 92% and minimal SOC depletion (15%) due to its steady-speed profile. The WLTP cycle shows wide power fluctuations (−30–19.3 kW), and a motor temperature rise of 73.6 °C. The NEDC results indicate a thermal increase of 75.1 °C. Model results show good agreement with published benchmarks, with deviations generally below 5%, validating the framework’s accuracy. These findings underscore the importance of cycle-sensitive analysis in optimizing energy use and thermal management in EV powertrain design.


6 December 2025 in Vehicles
Verified
Journal Article
Open access
PDF file
AAAbdulrahman Obaid Alenezi
Abdulrahman Obaid Alenezi
Jafar MasriJafar Masri
Jafar Masri
MIMohammad Ismail
Mohammad Ismail
This study presents a predictive maintenance framework for hybrid electric vehicles (HEVs) based on emissions behaviour under laboratory-simulated driving conditions. Vehicle speed, road gradient, and ambient temperature were selected as the principal input variables affecting emission levels. Using simulated datasets, three machine learning model, specifically Linear Regression, Multilayer Perceptron (MLP), as well as Random Forest, were trained and evaluated. Within that set, the Random Forest model demonstrated the best performance, achieving an R2 score of 0.79, Mean Absolute Error (MAE) of 12.57 g/km, and root mean square error (RMSE) of 15.4 g/km, significantly outperforming both Linear Regression and MLP. A MATLAB-based graphical interface was developed to allow real-time classification of emission severity using defined thresholds (Normal ≤ 150 g/km, Warning ≤ 220 g/km, Critical > 220 g/km) and to provide automatic maintenance recommendations derived from the predicted emissions. Scenario-based validation confirmed the system’s ability to detect emission anomalies, which might function as early indicators of mechanical degradation when interpreted relative to operating conditions. The proposed framework, developed using laboratory-simulated datasets, provides a practical, interpretable, and accurate solution for emissions-based predictive maintenance. Although the results demonstrate feasibility, the framework should be further confirmed with real-world on-road data prior to large-scale use.

17 August 2026 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
OAOqlah Al-Refai
Oqlah Al-Refai
Saed Al AtawnehSaed Al Atawneh
Saed Al Atawneh
MAMohammed Ali
Mohammed Ali
AAAbdulrahman Obaid Alenezi
Abdulrahman Obaid Alenezi
Let A denote the class of functions g(z)=z+∑k=2∞akzk analytic and normalized in U={z:|z|<1}, and let D={g∈A:|g″(z)|≤1,z∈U}. We give a short, self-contained proof that D consists entirely of univalent functions by a direct line-integral estimate combined with the classical Noshiro–Warschawski theorem. We then solve, in closed form and with explicit extremal functions, two classical extremal coefficient problems for D: the Fekete–Szegő problem and the second Hankel determinant, using the exact Schur parametrization of bounded analytic functions applied to g″. We also establish a sharp bound on a single coefficient |an| for every n≥2, obtained by an elementary Parseval argument that does not require the full joint Schur parametrization needed for the Fekete–Szegő and Hankel problems. We then compose D with the Owa–Srivastava fractional derivative operator Ωzδ (δ∈[0,1)), used to build fractional bi-univalent subclasses, to define the one-parameter family D(δ)={g∈A:|(Ωzδg)″(z)|≤1}, and extend all three results to D(δ), again with explicit extremal functions. Because the underlying weights grow at different rates in the fractional parameter δ, the Fekete–Szegő problem exhibits a genuine, monotone bifurcation as δ ranges over [0,1), while the Hankel and general-coefficient bounds decrease monotonically—effects that are structural consequences of the fractional operator rather than a simple rescaling of the classical case. All results are verified in two independent numerical ways: the Schur parametrization lemma itself is checked against an explicit, independently constructed rational Schur function whose Taylor coefficients are extracted numerically via the Cauchy integral formula, and the sharp bounds are checked by Monte Carlo maximization over the admissible Schur parameters. Both checks are explained in detail and agree with the closed forms to at least four decimal places. Unlike the Carathéodory class of functions with positive real part, whose coefficient body is fixed at the origin (value 1) and is classically parametrized without an extra recursive step, the Schur class B used here does not pin down φ(0), so its exact coefficient body genuinely requires the two-step recursive Schur parametrization applied below to g″; identifying and exploiting this distinction is part of the technical contribution of the paper.

2 September 2026 in Electrical Engineering & Electromechanics
Verified
Journal Article
Open access
PDF file
Tareq HamadnehTareq Hamadneh
Tareq Hamadneh
IFIbraheem Falahah
Ibraheem Falahah
BBB. Batiha
B. Batiha
AAAbdulrahman Obaid Alenezi
Abdulrahman Obaid Alenezi
MAM. Ali
M. Ali
Introduction. The hydrothermal scheduling problem is one of the important problems in the economic operation of power systems, which aims to determine the optimal production schedule of hydro and thermal power plants with the lowest fuel cost and observing all operating constraints. The existence of nonlinear relationships, time dependence between variables, the structure of cascaded reservoir system, hydraulic constraints and large search space make solving this problem an important challenge in the field of power system optimization. Problem. In this problem, the operation schedule of hydro and thermal power plants must be determined in such a way that in addition to meeting power demand, the constraints related to power balance, production limits, outlet flow limits, reservoir volume, water delay and hydraulic continuity are also fully observed. These features cause the problem to be placed in the group of nonlinear constrained optimization problems. Goal. To provide an efficient method to solve the hydrothermal scheduling problem and achieve an optimal operating plan with minimum production cost. Methodology. In this research, an improved version of the teaching-learning-based optimization (ITLBO) algorithm is introduced to solve this problem. In the proposed method, a small and controlled random perturbation is added to both the teacher and learner phases to maintain population diversity, reduce the probability of early convergence, and increase the search power of the algorithm. The performance of the proposed method is evaluated on a standard system consisting of 4 hydro power plants and 1 equivalent thermal power plant. Results. The results show that ITLBO is able to produce a valid operating plan for the hydrothermal scheduling problem by fully respecting all model constraints and increasing the value of the objective function to 1383011. Also, the performance of this method has been compared with 7 algorithms: genetic algorithm (GA), particle swarm optimization (PSO), gravitational search algorithm (GSA), multi-verse optimizer (MVO), whale optimization algorithm (WOA), Grey Wolf Optimizer (GWO) and tunicate swarm algorithm (TSA). The comparison results show that ITLBO, by obtaining the best values of mean, median and standard, along with the first rank, provides the best solution quality and the highest stability among all the algorithms studied. Scientific novelty. The providing an ITLBO and its effective application to solve the hydrothermal scheduling problem along with a comprehensive evaluation and comparison with 7 competing algorithms. Practical value. The findings show that ITLBO is an efficient, stable and reliable method for solving the hydrothermal scheduling problem and can reduce the operating cost of power systems and increase the economic efficiency of power networks. References 34, tables 7, figures 2.

9 November 2026 in Energies
Verified
Journal Article
Open access
PDF file
AAAbdulrahman Obaid Alenezi
Abdulrahman Obaid Alenezi
MIMohammad Ismail
Mohammad Ismail
Jafar MasriJafar Masri
Jafar Masri
Supercritical CO2 (sCO2) is a promising working fluid for compact thermal systems owing to its high heat transfer capability and advantageous thermophysical properties close to the pseudocritical region. However, strong property gradients in this regime give rise to complex thermo–hydraulic phenomena, comprising heat transfer deterioration (HTD), buoyancy-driven stratification, thermal acceleration, and flow instability, which restrict performance and predictive accuracy. This review provides a mechanism-based and design-oriented overview of sCO2 transport behaviour in compact configurations, for example, straight and curved tubes, micro/minichannels, printed circuit heat exchangers and enhanced passages. The analysis shows HTD results from the coupled effects of pseudo-boiling-like behaviour, buoyancy, and thermal acceleration, with their relative importance determined by geometry, heating distribution, and operating conditions. Comparative evaluation reveals that no single configuration is consistently optimal. Conversely, performance is defined by trade-offs between heat transfer enhancement, pressure-drop penalty, and thermal uniformity. Advanced geometries and passive enhancement techniques improve mixing and suppress stratification, whilst often increasing hydraulic resistance and sensitivity to flow maldistribution. Moreover, the review identifies limitations in the transferability of predictive correlations across fluids, geometries and heating conditions, emphasising the need to respect their calibration ranges. The findings underline the need for geometry-aware, heating-aware, and mechanism-based predictive models, in conjunction with integrated design approaches that combine local enhancement, flow distribution, and system-level stability. The results provide an integrated framework connecting transport mechanisms, compact-channel design, and system performance, proposing guidance for the development of efficient and stable sCO2 thermal systems.