Volodymyr Teslia

Volodymyr Teslia

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2023 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
KUKharkiv National Automobile and Road University
Kharkiv National Automobile and Road University
ADAbramov Dmytrii
Abramov Dmytrii
VTVolodymyr Teslia
Volodymyr Teslia
TUTernopil Ivan Puluj National Technical University
Ternopil Ivan Puluj National Technical University
AGAndriy Gupka
Andriy Gupka
MSMaria Sipravska
Maria Sipravska
Dmytrii Abramov, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Road University, Kharkiv, Ukraine, ORCID ID: 0000-0003-1846-1991 Volodymyr Teslia, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: volodymyr_teslya@ukr.net, ORCID ID: 0000-0002-7865-4712 Andriy Gupka, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: Gypkab@gmail.com, ORCID ID: 0000-0002-7565-5664 Maria Sipravska, assistent, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: mariaradyk03@ukr.net, ORCID ID: 0000-0001-6758-6593 In this article, the importance of the interaction between fuel quality and the technical condition of the vehicle is examined to determine its dynamic characteristics and road safety. The research is based on the analysis of the impact of these factors on the vehicle during operation and maneuver execution, especially during overtaking maneuvers where having sufficient engine power reserve to achieve the required level of acceleration is crucial. It is noted that understanding the reasons for changes in dynamic properties is critical, as a reduction in the engine power reserve of the vehicle can complicate the safe execution of overtaking maneuvers. The main focus of the work is placed on the necessity of considering these changes in the vehicle's mobility control systems. The article also includes an analysis of recent research in the field of the interaction between fuel and the technical condition of the vehicle. Research in this area is aimed at understanding the interaction between fuel parameters and the technical characteristics of vehicles to make transportation more efficient, extend the service life of vehicles, and address environmental challenges. The article concludes with findings that emphasize the effectiveness of the developed coefficient for considering the technical condition of the vehicle and fuel quality to enhance the accuracy of safety systems and predict the potential acceleration of the vehicle in traffic. The proposed coefficient will make it possible to increase the accuracy of predicting the potential acceleration of the car by the on-board system. Additionally, the possibility of using this coefficient to detect changes in fuel quality and the technical condition of the vehicle is discussed, providing drivers with information through onboard diagnostic systems and measurement complexes to take appropriate actions.

26 May 2025 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
IHIvan Hevko
Ivan Hevko
VTVolodymyr Teslia
Volodymyr Teslia
MSMaria Sipravska
Maria Sipravska
BHBogdan Hevko
Bogdan Hevko
RKRoman Khoroshun
Roman Khoroshun
Ivan Нevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Volodymyr Teslya, PhD (Candidate of Technical Sciences), Associate Professor of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-7865-4712, e-mail: volodymyr_teslya@ukr.net Maria Sipravska, Senior lecturer of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-6758-6593, e-mail: mariaradyk03@ukr.net Bogdan Hevko, PhD in Economic Sciences (Candidate of Economic Sciences), Associate Professor of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-1639-2136, e-mail: gevkoivan1@ukr.net, 0967351082 Roman Khoroshun, Assistant of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-1862-7640, e-mail: roman_086@ukr.net Despite the implementation of various measures to improve road traffic safety, the accident rate at pedestrian crossings and signalized intersections remains high. The main causes include the human factor, ineffective traffic control, and insufficient use of modern technologies for monitoring and managing traffic flows. Unsignalized pedestrian crossings often pose a high-risk area due to unpredictable pedestrian and driver behavior, as well as poor visibility in adverse weather conditions. Signalized crossings and intersections also have drawbacks, particularly a lack of adaptability to traffic flow changes, which can lead to inefficient waiting times for both pedestrians and vehicles. Therefore, there is a need for research and implementation of new intelligent transport systems capable of analyzing real-time road conditions, adjusting traffic light operations, and improving safety for all road users. This study examines ways to enhance the efficiency and safety of road traffic through the introduction of new technologies in pedestrian crossing management and traffic flow regulation. The research focuses on the effectiveness of sensor-based unsignalized pedestrian crossings, sensor-controlled crossings with intelligent traffic lights, and signalized intersections equipped with adaptive traffic light systems. Their impact on accident reduction and improved traffic organization is analyzed. Practical recommendations for integrating these technologies into urban infrastructure are provided. The increasing number of vehicles and traffic intensity in urban areas contribute to a rise in accident rates, particularly at pedestrian crossings and regulated intersections. Traditional traffic control methods are not always effective as they fail to account for dynamic traffic flow changes and behavioral patterns of road users. Implementing intelligent transport systems can significantly improve the situation by enabling automated traffic management using advanced technologies. The objective of this study is to analyze and assess the efficiency of sensor-based unsignalized pedestrian crossings, sensor-controlled regulated crossings with intelligent traffic lights, and signalized intersections with adaptive traffic light systems. The research confirms that the implementation of smart pedestrian crossings and intersections contributes to a reduction in accident rates and directly impacts the decrease in mortality and injuries among road users. The proposed project solutions developed in this study help lower accident rates, reduce vehicle idle time at smart pedestrian crossings and intersections, decrease harmful emissions and fuel consumption, enhance driver productivity, and improve the overall efficiency of vehicle operations. Further studies should focus on developing cost-effective systems, integrating them into existing transport infrastructure, and evaluating the long-term effects of such technologies in large cities. To maximize effectiveness, detailed traffic flow analyses, local conditions assessments, and pre-implementation evaluations of expected outcomes should be conducted to ensure optimal deployment of smart pedestrian crossings and intersections in urban infrastructure.

27 December 2023 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
APAndrii Pugach
Andrii Pugach
DUDnipro State Agrarian and Economic University
Dnipro State Agrarian and Economic University
VAViktor Aulin
Viktor Aulin
VMVasyl Melnychenko
Vasyl Melnychenko
ODOleksii Derkach
Oleksii Derkach
TPTernopil National Technical University named after Ivan Pulyu
Ternopil National Technical University named after Ivan Pulyu
Andrii Pugach, Professor, Doctor of Public Administration, Doctor in Technics (Doctor of Technic Sciences), Dnipro State Agrarian and Economic University, Dnipro, Ukraine, e-mail: anpugach13@gmail.com, ORCID ID: 0000-0002-5586-424X Viktor Aulin, Professor, Doctor in Technics (Doctor of Technic Sciences), Central Ukraіnian National Technical University, Kropyvnytskyi, Ukraine, e-mail: AulinVV@gmail.com, ORCID ID: 0000-0003-2737-120X Vasyl Melnychenko, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Dnipro State Agrarian and Economic University, Dnipro, Ukraine, e-mail: schoolteacher7a@ukr.net, ORCID ID: 0000-0003-0681-6732 Oleksii Derkach, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Dnipro State Agrarian and Economic University, Dnipro, Ukraine, e-mail: addsau@gmail.com, ORCID ID: 0000-0002-5537-8022 Volodymyr Teslia, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: volodymyr_teslya@ukr.net, ORCID ID: 0000-0002-7865-4712 It has been established that when the diesel engine is overloaded, the smokiness of the exhaust gases increases. This indicator is affected by the configuration of the unit, incorrectly selected operating mode, existing violations in the regulation and operation of the fuel equipment. The results of a comparative analysis of ways to increase the indicators of domestic and foreign-made diesel engines of tractors and cars, which are in the conditions of ordinary operation of Ukrainian enterprises of various forms of ownership, are presented. Changes in fuel efficiency indicators and environmental indicators of diesel tractors and machine-tractor units were analyzed. As an example, the operation of the ND-22/6B4 high-pressure fuel pump, the SMD-62 diesel engine, and the T-150K tractor was considered. Research and observation of the technique was carried out over a long period. The historical aspect of the development of this topic is given to show the dynamics and focus attention on more effective ways of increasing the indicators of tractors and cars in ordinary conditions of operation and their use. The mentioned questions about the analysis of the design and functioning of modern tractors of foreign production are considered. It was found that the increased smoke of exhaust gases also occurs when the diesel engine is boosted by excessive fuel supply. To reduce smoke, it is possible to use modernized regulators of high-pressure fuel pumps. Methods of regulating the number of revolutions of auto-tractor diesels are proposed by introducing into the design of the fuel pump regulator two-mode, all-mode and single-mode regulators with correction of intermediate characteristics in pairs or jointly with a smoke limiter and a negative corrector.

4 July 2025 in Eng
Verified
Journal Article
Open access
PDF file
Volodymyr DzyuraVolodymyr Dzyura
Volodymyr Dzyura
Pavlo MaruschakPavlo Maruschak
Pavlo Maruschak
Roman BytsaRoman Bytsa
Roman Bytsa
RKRoman Komar
Roman Komar
VTVolodymyr Teslia
Volodymyr Teslia
AMAbdellah Menou
Abdellah Menou
The mechanisms of in-service damage caused to the cylinder units of internal combustion engines (ICE) during their operation are analyzed. Long-term operation under harsh conditions, failure to comply with operating conditions, and breach of design and technology standards were found to be the major reasons for the initiation and propagation of in-service defects. The life of ICE cylinder liners is proposed to be extended by forming regular microreliefs. This represents a promising surface engineering strategy. Axial lines of the regular microrelief’s grooves were considered using analytical dependencies, which helped determine their coordinates and those of their equidistant. The authors simulated the pattern according to which the groove axes of type II regular microrelief could be aligned on the inner surface of the cylinder liner. To this end, a tool with three deforming elements was used. Technical means have been developed to implement this technology on the working surfaces of the liner–piston group’s mating parts.

29 May 2023 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
CUCentral Ukrainian National Technical University
Central Ukrainian National Technical University
VAViktor Aulin
Viktor Aulin
OLOleg Liashuk
Oleg Liashuk
IUIvan Pulyuy Ternopil National Technical University
Ivan Pulyuy Ternopil National Technical University
AHAndrey Hrinkiv
Andrey Hrinkiv
VTVolodymyr Teslia
Volodymyr Teslia
This work examines the problem of technical and economic efficiency of purchasing new transport vehicles by motor vehicle enterprises of the region by purchase and with the help of leasing relations in order to increase their productivity and efficiency. It is shown that there is a need to create the theoretical and methodological foundations of the leasing of transport vehicles, as one of the ways to re-equip the system of vehicles in the regions of Ukraine and increase the efficiency of their use on the basis of leasing relations. It is substantiated that when developing the foundations, it is expedient to base the system on improving the technical condition of machines with the appropriate strategy of their maintenance and repair. A structural diagram of the system of transport vehicles of the region and motor transport enterprises, which have a modular structure of rolling stock, was built. The main tasks in the development of issues of new leasing relations are outlined. When determining the number of leasing objects, the matrix of the system of technical effects of operations was used, according to the strategy of maintenance and repair of transport vehicles. When creating the theoretical and methodological foundations of the technical and economic efficiency of leasing, the costs for the implementation of maintenance and repair operations of transport vehicles were considered. It is noted that when leasing, it is important to assess the technical condition of transport vehicles by diagnosing them. The work defines the conditions under which it is expedient to develop leasing relations and when motor vehicle enterprises simply buy new vehicles. The sequence of the assessment of the corresponding costs is shown.

29 May 2023 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
TUTernopil Ivan Puluj National Technical University
Ternopil Ivan Puluj National Technical University
IHIvan Hevko
Ivan Hevko
YPYuriy Pyndus
Yuriy Pyndus
MLMykhailo Levkovich
Mykhailo Levkovich
VTVolodymyr Teslia
Volodymyr Teslia
MSMaria Sipravska
Maria Sipravska
The purpose of this article is to study the influence of the geometric parameters of the elements of the bottom of the body of a truck semi-trailer on its stress-strain state. To solve this problem, a combination of analytical, numerical and experimental methods is used to investigate the stress-strain state of the structure in car bodies. With help of the stress-strain method, a comprehensive study of the bodies of cargo semi-trailers was carried out, which led to the development of innovative engineering solutions aimed at increasing their technical and economic indicators. This was achieved by analyzing the influence of various factors on the structure and design features. The research results were obtained on the basis of the stress-strain state (SST) using advanced methods of engineering analysis, in particular, using the specialized SolidWorks software complex on a CAD model representing the body of a semi-trailer truck. The results obtained after conducting these studies serve as the basis for making engineering decisions aimed at improving the design of the truck body.