Roman Komar

Roman Komar

Auto-generated profile, based on publicly available information

Roman Komar

Department of Wheel Vehicles, Ternopil Ivan Puluj National Technical University, 56, Ruska St., 46001 Ternopil, Ukraine

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in Scientific journal of the Ternopil national technical university
Verified
Journal Article
Open access
VBViktor Baranovskyi
Viktor Baranovskyi
VPVitalii Pankiv
Vitalii Pankiv
RKRoman Komar
Roman Komar
BBBohdan Berezhenko
Bohdan Berezhenko
OKOleg Korol
Oleg Korol
Increasing productivity and reducing energy costs of the process of operation of screw devices and technological lines of processing complexes, where they are installed in agricultural sector, in the first stage depends mainly on the throughput capacity of loading hoppers. At the same time, the need for rational management of the flows, that have quite significant random deviations from the measure of average of the root crops flow, is quite an urgent task. The objective of investigation is to increase the efficiency of screw conveyor-crushers by developing a mathematical model which functionally describes the technological process of movement of the material in the loading hopper. The article provides an analysis of the process root crops movement in the screw conveyor loading hopper through the development of deterministic mathematical models that describe and determine the quantitative indicators of per second feeding of root crops to the auger depending on the hopper loading.

26 May 2025 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
IНIvan Нevko
Ivan Нevko
RRRoman Rohatynskyi
Roman Rohatynskyi
RKRoman Komar
Roman Komar
ITIgor Tkachenko
Igor Tkachenko
AGAndrii Gypka
Andrii Gypka
Ivan Нevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Roman Rohatynskyi, Doctor of Technical Sciences, Professor, Professor of the Department of Automobiles Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, https://orcid.org/0000-0001-8536-4599, e-mail: rogatynskyi@gmail.com Roman Komar, Associate Professor, PhD in Technical Sciences, Associate Professor at the Department of Engineering of Manufacturing Technologies, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, https://orcid.org/0000-0001-7965-4784, e-mail: rkomar@ukr.net Igor Tkachenko, Associate Professor, PhD, Associate Professor at the Department of Engineering of Manufacturing Technologies, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, https://orcid.org/0000-0002-2639-7 988, e-mail: tkachenkoigor61@gmail.com Andrii Gypka, Associate Professor, PhD in Technical Sciences, Associate Professor of the Department of Automobiles, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, https://orcid.org/0000-0002-7565-5664, e-mail: Gypkab@gmail.com The process of technological design and manufacturing of special screw blanks is accompanied by a number of technical and production problems that require systematic analysis and comprehensive solutions. One of the main problems is the difficulty of ensuring high accuracy of the geometric parameters of screw surfaces, especially in conditions of single or small-scale production. Such surfaces have a complex spatial shape, which requires the use of specialized tools, high-precision equipment and modern control methods. Another important challenge is the choice of the optimal method of forming the workpiece depending on the material, design requirements and operating conditions. In this case, it is necessary to take into account not only technical characteristics, but also the economic feasibility of production, equipment costs, and energy intensity of the process. Another problem is achieving the required mechanical properties of the product (strength, wear resistance, fatigue endurance), which often requires the implementation of additional technological operations, in particular heat treatment or surface hardening. All these factors complicate technological planning, increase the risks of defects and increase the cost of production. Thus, the main problem is to develop rational and technically efficient technological methods that are capable of ensuring the manufacture of special screw blanks with the required characteristics at minimal production costs. Modern scientific works in this area of research highlight a wide range of approaches to obtaining special screw blanks, including methods of winding, rolling, stamping, pressing, etc., each of which has its own advantages and limitations depending on the type of material, spiral geometry, and operating conditions of the product. Particular attention is paid to increasing the manufacturability of special equipment designs, in particular by improving design solutions, reducing energy consumption and material consumption in the manufacturing process, as well as developing specialized technological tools. Recent research in the field of technological design and manufacturing of special screw blanks covers a wide range of innovative approaches aimed at increasing production efficiency, reducing energy consumption, and improving product quality. In particular, such approaches as multi-level classification of screw and auger billet designs were proposed; morphological analysis for the synthesis of new methods of winding screw billets; optimization of technological processes for manufacturing screw billets, in particular, by unifying designs and implementing modern design methods. The work substantiates four new methods for manufacturing U-shaped helical surfaces of transport pipes using frames and forming rollers. The developed methods can be implemented in different ways. In particular, by indenting U-shaped ridges on the finished pipe, or by simultaneously winding and U-shaped indenting a rectangular-section strip onto a frame with a U-shaped spiral protrusion, followed by fastening the protrusions of the wound strip with a weld. In general, the developed methods for manufacturing U-shaped helical surfaces of transport pipes can be conditionally divided into two types - with the possibility of changing the height of the U-shaped ridge by changing the diameter of the spring bar, and without such a possibility, in which frames with a constant height of the U-shaped ridge are used. The work also defines and characterizes the structural materials for the manufacture of helical transport pipes. As starting materials, it is advisable to use seamless cold- and hot-rolled pipes, cast pipes, and cold-rolled strip products. For both types of methods, rational structural and technological parameters for their implementation are defined and presented.

1 March 2023 in Acta Technologica Agriculturae
Verified
Journal Article
Open access
PDF file
VBViktor Baranovsky
Viktor Baranovsky
JJJán Jobbágy
Ján Jobbágy
SMSerhii Marynenko
Serhii Marynenko
MPMaria Pankiv
Maria Pankiv
RKRoman Komar
Roman Komar
Fodder beet root crops in the autumn-winter period are one of the main types of juicy fodder for dairy livestock. Mechanized harvesting of fodder beet roots is a rather complex and energy-consuming technological process. The criteria that meet the requirements for the operation of root-harvesting machines are first of all the quality of digging and separation of impurities from root crops. The purpose of the work was improvement of the process of mechanized digging of fodder beets by an adapted digging-transport combined working body based on analytical and empirical research of the second feeds of constituent components of the dug pile of root crops. Based on the results of experimental studies, empirical regression equations were developed, which functionally describe the change in the second supply of the excavated components of the pile of root crops, depending on the speed of the root-harvesting machine and the rotation frequency of the drive shaft of the adapted digging-transport combined working body. Based on the comparative analysis, it was found that the discrepancy between the theoretical and approximated experimental values of second feeds is 5–10%. The results of the study are a further step in improving the method of optimizing the parameters of working bodies for digging and cleaning root crops from impurities.

4 July 2025 in Eng
Verified
Journal Article
Open access
PDF file
Volodymyr DzyuraVolodymyr Dzyura
Volodymyr Dzyura
Pavlo MaruschakPavlo Maruschak
Pavlo Maruschak
Roman BytsaRoman Bytsa
Roman Bytsa
RKRoman Komar
Roman Komar
VTVolodymyr Teslia
Volodymyr Teslia
AMAbdellah Menou
Abdellah Menou
The mechanisms of in-service damage caused to the cylinder units of internal combustion engines (ICE) during their operation are analyzed. Long-term operation under harsh conditions, failure to comply with operating conditions, and breach of design and technology standards were found to be the major reasons for the initiation and propagation of in-service defects. The life of ICE cylinder liners is proposed to be extended by forming regular microreliefs. This represents a promising surface engineering strategy. Axial lines of the regular microrelief’s grooves were considered using analytical dependencies, which helped determine their coordinates and those of their equidistant. The authors simulated the pattern according to which the groove axes of type II regular microrelief could be aligned on the inner surface of the cylinder liner. To this end, a tool with three deforming elements was used. Technical means have been developed to implement this technology on the working surfaces of the liner–piston group’s mating parts.

4 December 2025 in Central Ukrainian Scientific Bulletin. Technical Sciences
Verified
Journal Article
Closed access
IНIvan Нevko
Ivan Нevko
RRRoman Rohatynskyi
Roman Rohatynskyi
OLOleg Lyashuk
Oleg Lyashuk
MPMykhailo Pylypets
Mykhailo Pylypets
ITIgor Tkachenko
Igor Tkachenko
RKRoman Komar
Roman Komar
Ivan Hevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Roman Rohatynskyi, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-8536- 4599, e-mail: rogatynskyi@gmail.com Oleg Lyashuk, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-4881-8568, e-mail: oleglashuk@ukr.net Mykhailo Pylypets, Professor, Doctor of Science, Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000- 0002-4286-9324, e-mail: pulupecmi@gmail.com Igor Tkachenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-3029-4578, e-mail: tkachenkoigor61@gmail.com Kostiantyn Buravchenko, Associate Professor, PhD (Candidate of Technical Sciences), Associate Professor of the Mechanical Engineering Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-7965-4784, e-mail: rkomar@ukr.net The technological design of individual methods of winding broadband helical spirals is characterized by a number of design, technological and production problems that require systematic understanding and effective solutions in each individual case. Solutions related to solving problems in the process of manufacturing broadband helical coils include finding possible solutions to reduce energy consumption, reducing the number of operations and reducing their duration, finding original methods of their manufacture, and calculating and selecting the most rational ones, minimizing tooling costs, effective selection of materials depending on the design requirements and operating conditions. Also, an important factor in the manufacture of broadband helical spirals, especially in single and small-scale production, is ensuring the necessary accuracy of the parameters of their geometric surfaces, since these surfaces have a rather complex spatial shape, and this requires the use of specialized high-precision equipment and tools. Another important problem in the manufacture of broadband helical spirals is ensuring their appropriate mechanical properties, such as wear resistance, strength, fatigue endurance. This sometimes requires the use of additional technological operations in the technological process, such as surface hardening of the outer contour of the spiral, heat treatment of the spiral, etc. Therefore, obtaining broadband helical spirals requires technological design of effective methods of their manufacture, which can ensure the production of these spirals with the required characteristics at minimal time, energy and other costs. The research is devoted to the technological design of methods for winding broadband helical spirals with a rotating sleeve. Broadband helical spirals are used in many technical systems to perform various technological operations. Classical methods of winding helical spirals involve forming them by winding the strip onto various types of frames by pressing it with forming rollers. However, for the production of wide-band helical spirals, methods of obtaining them using a rotating sleeve are more effective. These methods involve the forming process with the pressing of the workpiece along the outer contour with the clamping of the side surfaces. In this case, the inner surface of the screw workpiece, as a rule, is not involved in the forming process and does not touch the mandrel, forming rollers or rotating sleeve. This allows for a significant height of the winding tape and the production of wide-band helical spirals. Such methods are implemented using a rotating sleeve and are of two types: without calibration at the winding stage and with calibration at the winding stage. These methods of winding wide-band helical coils using a rotating sleeve can be implemented without or with strip pre-preparation. This preparation involves performing additional operations before winding, such as cutting out or cutting triangular or trapezoidal segments on the strip blank. Accordingly, when providing such variants of the method of obtaining broadband helical spirals, their height will increase significantly compared to classical analogues. For both types of substantiated methods of winding broadband helical spirals with a rotating sleeve, the basic design and technological parameters of their manufacturing process are determined and presented. Also, considerable attention is paid in the work to the analysis of structural materials and tools used in the manufacture of broadband helical spirals.

24 September 2026 in Research in Agricultural Engineering
Verified
Journal Article
Open access
VBViktor Baranovsky
Viktor Baranovsky
MPMaria Pankiv
Maria Pankiv
RKRoman Komar
Roman Komar
VPVitalii Pankiv
Vitalii Pankiv
YBYevhen Berezhenko
Yevhen Berezhenko
Reducing the energy consumption during the harvesting of large root crops (such as sugar and fodder beets, and chicory), which are used to produce food and industrial products, is a priority issue for improving the efficiency of production pro...