The disposal of wastewater resulting from petroleum industries presents a major environmental challenge due to the presence of hard-to-degrade organic pollutants, such as oils and hydrocarbons, and high chemical oxygen demand (COD). In this study, an efficient and eco-friendly method was developed to treat such wastewater using a photocatalyst composed of biochar derived from pistachio shells and loaded with zinc oxide (ZnO) nanoparticles. The biochar-ZnO composite was prepared via a co-precipitation-assisted pyrolysis method to evaluate its efficiency in the photocatalytic degradation of petroleum wastewater (PW). The synthesized material was characterized using various techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy, to determine surface morphology, crystal structure, and functional groups present on the catalyst surface. Photocatalytic degradation experiments were conducted under UV and sunlight for 90 h of irradiation to evaluate the performance of the proposed system in removing oil and reducing COD levels. Key operational parameters, such as pH (2–10), catalyst dosage (0–0.1) g/50 mL, and oil and COD concentrations (50–500) ppm and (125–1252) ppm, were optimized by response surface methodology (RSM) to obtain the maximum oil and COD removal efficiency. The oil and COD were removed from PW (90.20% and 88.80%) at 0.1 g/50 mL of PS/ZnO, a pH of 2, and 50 ppm oil concentration (125 ppm of COD concentration) under UV light. The results show that pollutant removal is slightly better when using sunlight (80.00% oil removal, 78.28% COD removal) than when using four lamps of UV light (77.50% oil removal, 75.52% COD removal) at 0.055 g/50 mL of PS/ZnO, a pH of 6.8, and 100 ppm of oil concentration (290 ppm of COD concentration). The degradation rates of the PS/ZnO supported a pseudo-first-order kinetic model with R2 values of 0.9960 and 0.9922 for oil and COD. This work indicates the potential use of agricultural waste, such as pistachio shells, as a sustainable source for producing effective catalysts for industrial wastewater treatment, opening broad prospects in the field of green and nanotechnology-based environmental solutions in the development of eco-friendly and effective wastewater treatment technologies under solar light.
1 March 2025 in Journal of Applied Sciences and Nanotechnology
In the present work, a novel eco-friendly nanocatalyst (NC) calcium oxide (CaO) is synthesized from the waste of tomato plants by physical method for the degradation of oil in oily wastewater by photocatalytic technology as a sophisticated oxidation process. The characterization of NC prepared is described by dynamic light scattering (DLS), Brunauer-Emmett-Teller (BET) analysis, Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), X-ray powder diffraction (XRD), and energy-dispersive X-ray (EDX) spectroscopy, which illustrated that the NC prepared possessed a nanoscale size and a cubic crystal structure. The activity of NC in the photodegradation process is evaluated using oil concentration (100–500 ppm), amount of NC (0.1–1) g/L, and pH (4–12) at a specific aeration rate of 1 L/min and time irradiation of 30–180 min and under UV light. The findings showed that the degradation efficiency of oil increased with an increased amount of NC, time, and pH while decreasing with increased oil concentration. The maximum degradation of oil reached 83.0% at optimum conditions (oil concentration = 100 ppm, amount of NC = 0.6 g/L, pH = 7, time of irradiation = 120 min, and temperature = 23 ◦C). This work illustrates that the novel NC can be employed as an environmentally friendly and economical photocatalyst and might be improved in its characteristics and performance by thermal technique (calcination) to enhance the reduction of oil from oily wastewater.