Orthotropic steel decks (OSDs) serve as critical load-bearing components in long-span steel bridges, but high-amplitude welding residual stresses (WRSs) generated during the welding process pose significant threats to structural integrity. To mitigate these stresses, post-weld heat treatment (PWHT) has emerged as a promising technique. This investigation first establishes a semi-structural thermo-elasto-plastic finite element model of the Deck-U-rib-Diaphragm system with a six-pass welding sequence. The temperature field is modeled via a double-ellipsoidal heat source and birth–death element approach. Subsequently, thermo-mechanical coupling analysis is conducted to investigate the distribution characteristics of Von Mises residual stresses. The stress relief effect of PWHT is then explored by comparing different holding temperatures (T) and holding times (t), achieving a balance between stress reduction effectiveness and economic efficiency, when T = 550 °C and t = 40 min. Finally, full-scale experimental tests are designed, and the hole-drilling method is utilized to validate the numerical simulation results. This research provides valuable insights for the design of PWHT processes for OSDs.
The application of steel–concrete composite structures in the pylons of long-span cable-stayed bridges can effectively address the issue of insufficient structural stiffness. Shear connectors are critical load-transfer components in steel–concrete composite segments, where they are typically arranged to ensure coordinated force transmission between steel and concrete. The stud–PBL composite shear connector, as a novel type of connector, has been implemented in engineering practice. However, the collaborative load-bearing performance between studs and PBL connectors remains unclear. Most shear connectors operate within the elastic stage during service, making their elastic stiffness a key evaluation metric. Based on the Winkler elastic foundation beam theory, plane strain theory, and the spring series–parallel model, this study derives the elastic stiffness calculation formulas for stud shear connectors and PBL shear connectors, respectively. The primary focus of this study was the single-layer stud–PBL composite shear connector within the steel–concrete composite section of bridge pylons. Embedded push-out tests were designed and conducted, comprising three main categories and eight subcategories. The load–slip curves for the three types of shear connectors were generated, and the stiffness calculation formula for the stud–PBL composite shear connector was verified through finite element analysis. The comparative push-out tests and finite element simulations demonstrate that the theoretical formula proposed in this study can effectively analyze the elastic stiffness of three types of shear connectors. The elastic stiffness of composite shear connectors can be regarded as the superposition of the elastic stiffness of studs and PBL shear connectors. Compared with single shear connectors, composite shear connectors exhibit superior elastic stiffness and shear resistance, meeting the application requirements of steel–concrete composite bridge pylons. The research findings provide a theoretical basis for the optimal design of shear connectors in large-span cable-stayed bridge composite pylons. Furthermore, the established formula has broad applicability.
30 January 2026 in International Journal of Solids and Structures