A constitutive relationship for modeling of shock wave propagation in orthotropic materials is proposed for nonlinear explicit transient large deformation computer codes (hydrocodes). A procedure for separation of material volumetric compression (compressibility effects equation of state) from deviatoric strain effects is formulated, which allows for the consistent calculation of stresses in the elastic regime as well as in the presence of shock waves. According to this procedure the pressure is defined as the state of stress that results in only volumetric deformation, and consequently is a diagonal second order tensor. As reported by Anderson et al. [Comput. Mech. 15, 201 (1994)], the shock response of an orthotropic material cannot be accurately predicted using the conventional decomposition of the stress tensor into isotropic and deviatoric parts. This paper presents two different stress decompositions based on the assumption that the stress tensor is split into two components: one component is due to volumetric strain and the other is due to deviatoric strain. Both decompositions are rigorously derived. In order to test their ability to describe shock propagation in orthotropic materials, both algorithms were implemented in a hydrocode and their predictions were compared to experimental plate impact data. The material considered was a carbon fiber reinforced epoxy material, which was tested in both the through-thickness and longitudinal directions. The decomposition showed good agreement with the physical behavior of the considered material, while the decomposition significantly overestimated the longitudinal stresses.
This paper describes a constitutive model for progressive damage in carbon fibre-reinforced composites (CFRPs), developed in the framework of thermodynamics and coupled with a vector equation of state. This made the constitutive model capable of modelling shock wave propagation within orthotropic materials. Damage is incorporated in the model by using reduction in the principal material stiffness based on the effective stress concept and the hypothesis of strain energy equivalence. Damage evolution was defined in terms of a modified Tuler–Bucher criteria. The constitutive model was implemented into Lawrence Livermore National Laboratory (LLNL) DYNA3D nonlinear hydrocode. Simulation results were validated against post-impact experimental data of spherical projectile impact on an aerospace-grade woven CFRP composite panel. Two plate thicknesses were considered and a range of impact velocities above the ballistic limit of the plates, ranging from 194 m/s to 1219 m/s. Other than for the size of the delamination zone in the minor material direction, the discrepancy between the experiments and numerical results for damage and delamination in the CFRP target plates was within 8%.
(1) Modeling and characterization of ductile fracture in metals is still a challenging task in the field of computational mechanics. Experimental testing offers specific responses in the form of crack-mouth (CMOD) and crack-tip (CTOD) opening displacement related to applied force or crack growth. The main aim of this paper is to develop a phase-field-based Finite Element Method (FEM) implementation for modeling of ductile fracture in stainless steel. (2) A Phase-Field Damage Model (PFDM) was coupled with von Mises plasticity and a work-densities-based criterion was employed, with a threshold to propose a new relationship between critical fracture energy and critical total strain value. In addition, the threshold value of potential internal energy—which controls damage evolution—is defined from the critical fracture energy. (3) The material properties of AISI 316L steel are determined by a uniaxial tensile test and the Compact Tension (CT) specimen crack growth test. The PFDM model is validated against the experimental results obtained in the fracture toughness characterization test, with the simulation results being within 8% of the experimental measurements. (4) The novel implementation offers the possibility for better control of the ductile behavior of metallic materials and damage initiation, evolution, and propagation.
Ships are usually under vibration, impact, and other kinds of static and dynamic loads. These loads arise from water flow across the hull or surfaces, the propeller cavitation, and so on. For optimal design purposes and reliable performance, experimental measurements are necessary. These sensors are often used under or near the water, working conditions that improve the risk of sensor damage. This paper aims at investigating, by the use of finite elements, the behavior of damaged piezoelectric sensors under traction and impact loads. The numerical method was calibrated using results available in the literature regarding piezoelectric and elastic plates with a central crack. After calibration, the simulation was used on two types of Lead-Zirconium-Titanium oxide (PZT) sandwich panel structures reinforced by aluminum skins. The results proved that the damage size and impact energy are important factors affecting the response of piezoelectric sensors; therefore, special attention might be considered when using these sensors for marine applications.