Improved perovskite photovoltaic performance: A recent entry in the solar cell race is perovskite cells, named for the structure adopted by salt made from metal halides and organic cations that absorb the light and generate charges. The charges generated have to be transferred to a metal oxide (typically titanium oxide), and some of these charge carriers are lost in the transfer. Mei et al. made this process more efficient by growing a more crystalline perovskite with fewer defects inside porous versions of titanium and zirconium oxide. They added a second organic cation that stuck to the pore walls and directed the growth of the perovskite crystals. The improved solar cells operated for more than 1000 hours under full sunlight. Science , this issue p. 295
26 January 2015 in Journal of Materials Chemistry A
In recent years, many research groups have synthesized ultra-thin silver nanowires (AgNWs) with diameters below 30 nm by employing Cl− and Br− simultaneously in the polyol process. However, the yield of AgNWs in this method was low, due to the production of Ag nanoparticles (AgNPs) as an unwanted byproduct, especially in the case of high Br− concentration. Here, we investigated the roles of Cl− and Br− in the preparation of AgNWs and then synthesized high aspect ratio (up to 2100) AgNWs in high yield (>85% AgNWs) using a Cl− and Br− co-mediated method. We found that multiply-twinned particles (MTPs) with different critical sizes were formed and grew into AgNWs, accompanied by a small and large amount of AgNPs for the NaCl and NaBr additives, respectively. For the first time, we propose that the growth of AgNWs of different diameters and yields can be understood based on the electron trap distribution (ETD) of the silver halide crystals. For the case of Cl− and Br− co-additives, a mixed silver halide crystal of AgBr1−xClx was formed, rather than the AgBr/AgCl mixture reported previously. In this type of crystal, the ETD is uniform, which is beneficial for the synthesis of AgNWs with small diameter (30~40 nm) and high aspect ratio. AgNW transparent electrodes were prepared in air by rod coating. A sheet resistance of 48 Ω/sq and transmittance of 95% at 550 nm were obtained without any post-treatment.