When surfactant is used as emulsifier, the stability of emulsion is often greatly reduced with the influence of reservoir conditions (temperature, pressure, salinity, etc. ), which shortens the validity period of emulsion. Pickering emulsion has a wide range of applications in the oil and gas field due to its advantages of good stability and easy regulation. In this article, the formation, stabilization mechanism, and influencing factors of Pickering emulsions were introduced, and the application status and prospects of Pickering emulsions in oil and gas field were summarized. It was pointed out that Pickering emulsion has many advantages and important research value when applied in deep strata and complicated reservoirs. It is expected that this article can effectively reflect the application value of Pickering emulsion in oil and gas field and promote the application of Pickering emulsion in petroleum industry.

Graphene and its derivatives, with their unique two-dimensional structures and excellent physical and chemical properties, have been an international research hotspot both in the research community and industry. However, in application-oriented research in the oil and gas industry they have only drawn attention in the past several years. Their excellent optical, electrical, thermal and mechanical performance make them great candidates for use in oil and gas exploration, drilling, production, and transportation. Combined with the actual requirements for well working fluids, chemical enhanced oil recovery, heavy oil recovery, profile control and water shutoff, tracers, oily wastewater treatment, pipeline corrosion prevention treatment, and tools and apparatus, etc., this paper introduces the behavior in water and toxicity to organisms of graphene and its derivatives in detail, and comprehensively reviews the research progress of graphene materials in the upstream oil and gas industry. Based on this, suggestions were put forward for the future research. This work is useful to the in-depth mechanism research and application scope broadening research in the upstream oil and gas industry.

Carbon-silica composites with nanoporous structures were synthesized for the adsorption of volatile organic compounds (VOCs), taking tetraethyl orthosilicate (TEOS) as the silicon source and activated carbon powder as the carbon source. The preparation conditions were as follows: the pH of the reaction system was 5.5, the hydrophobic modification time was 50 h, and the dosage of activated carbon was 2 wt%. Infrared spectrum analysis showed that the activated carbon was dispersed in the pores of aerogel to form the carbon-silica composites material. The static adsorption experiments, dynamic adsorption-desorption experiments, and regeneration experiments show that the prepared carbon-silica composites have microporous and mesoporous structures, the adsorption capacity for n-hexane is better than that of conventional hydrophobic silica gel, and the desorption performance is better than that of activated carbon. It still has a high retention rate of adsorption capacity after multiple adsorption-desorption cycles. The prepared carbon-silica composites material has good industrial application prospects in oil vapor recovery, providing a new alternative for solving organic waste gas pollution.

The composite flooding system composed of a surfactant and nanoparticles has shown great application potential in enhancing oil recovery. However, at present, these research studies are mainly focused on anionic surfactants. Relatively speaking, alkanolamide (CDEA), a nonionic surfactant, has the characteristics of a small adsorption amount on the rock surface, no cloud point, good temperature resistance, and good salt resistance. However, to the best of our best knowledge, there is no research report on the composite flooding system composed of CDEA and nanoparticles. Therefore, the surfactant/nanoparticle (S/NP) flooding system based on CDEA and nano-SiO₂ was studied in this paper. The S/NP flooding system (0.1% CDEA + 0.05% SiO₂) was constructed based on the performance in reducing the oil–water interfacial tension (IFT) and the stability of the composite system. The IFT between the S/NP flooding system and the crude oil can reach ultra-low values (3 × 10^–3 mN/m), and there is no obvious sedimentation within 72 h. The sandpack flood tests show that the oil recovery rate is increased by 16.8% compared with water flooding and finally reaches 58.2%. Based on micromodel flooding tests, the mechanisms of the S/NP flooding system are studied as follows: the synergistic effect of nanoparticles and surfactants can re-enforce its oil–water interface performance and improve the oil displacement efficiency and the Jamin effect of emulsified oil droplets, combined with the thickening property and retention plugging of nanoparticles, improves the sweep efficiency. As the surfactant and nanoparticle used in this study are commercially available industrial products, the research results have important guiding significance for promoting the industrial application of surfactant/nanoparticle composite flooding technology.

Surfactants play an important role in enhancing oil recovery (EOR). With the development of tertiary oil recovery technology and the continuous improvement of environmental protection requirements, green environmentally friendly surfactants play an important role in replacing conventional surfactants. In this paper, cardanol polyoxyethylene ether (CPE) was synthesized from natural biomass cardanol. Its structure was characterized, and its surface/interface properties, salt and temperature resistance, wettability, emulsification, and oil displacement effect were studied experimentally. The results showed that CPE had good interfacial activity and temperature and salt tolerance, which can reduce the oil-water interfacial tension to 10^-1 mN/m. The emulsion formed by CPE had good stability. With the increase in CPE dosage, the droplet size of the emulsion decreases. The emulsion stabilized by CPE can effectively enhance oil recovery by 11.8%. Therefore, CPE not only is environmentally friendly but also has great application potential in the field of EOR.