The use of lithium-ion batteries (LIBs) continues to grow to overcome environmental challenges, and spinel LiMn₂O₄ is employed as a high-performance and safe electrode material in this context.

In earlier studies, much research has focused on increasing the efficiency of heat exchanger fields. Therefore, in this study, graphene nanofluid was fabricated for use as a heat transfer medium for a heat exchanger. Graphene has excellent electrical conductivity, mechanical properties, and heat transfer properties. It is expected that the heat transfer efficiency will be improved by fabricating the nanofluid. However, graphene is prone to sedimentation, because of its cohesion due to van der Waals binding force. In this experiment, a nanofluid was fabricated with enhanced dispersibility by surfactant and the ball-milling process. The zeta potential, absorbance, and thermal conductivity of the nanofluid were measured. As a result, when using the ratio of 2:1 (graphene:sodium dodecyl sulfate (SDS)), a higher thermal conductivity was obtained than in other conditions.

Spinel LiMn₂O₄ (LMO) is a state-of-the-art cathode material for Li-ion batteries. However, the operating voltage and battery life of spinel LMO needs to be improved for application in various modern technologies. Modifying the composition of the spinel LMO material alters its electronic structure, thereby increasing its operating voltage. Additionally, modifying the microstructure of the spinel LMO by controlling the size and distribution of the particles can improve its electrochemical properties. In this study, we elucidate the sol-gel synthesis mechanisms of two common types of sol-gels (modified and unmodified metal complexes)—chelate gel and organic polymeric gel—and investigate their structural and morphological properties and electrochemical performances. This study highlights that uniform distribution of cations during sol-gel formation is important for the growth of LMO crystals. Furthermore, a homogeneous multicomponent sol-gel, necessary to ensure that no conflicting morphologies and structures would degrade the electrochemical performances, can be obtained when the sol-gel has a polymer-like structure and uniformly bound ions; this can be achieved by using additional multifunctional reagents, namely cross-linkers.

Ternary Ti-Nb-Zr alloys were prepared by a magnetron sputtering method with porous structures observed in some of them. In bulk, in order to control the porous structure, a space holder (NH₄HCO₃) is used in the sintering method. However, in the present work, we show that the porous structure is also dependent on alloy composition. The results from Young’s modulus tests confirm that these alloys obey d-electrons alloy theory. However, the Young’s modulus of ternary thin films (≈80–95 GPa) is lower than that for binary alloys (≈108–123 GPa). The depth recovery ratio of ternary Ti-Nb-Zr thin films is also higher than that for binary β-Ti-(25.9–34.2)Nb thin film alloys.

Recently, applications for lithium-ion batteries (LIBs) have expanded to include electric vehicles and electric energy storage systems, extending beyond power sources for portable electronic devices. The power sources of these flexible electronic devices require the creation of thin, light, and flexible power supply devices such as flexile electrolytes/insulators, electrode materials, current collectors, and batteries that play an important role in packaging. Demand will require the progress of modern electrode materials with high capacity, rate capability, cycle stability, electrical conductivity, and mechanical flexibility for the time to come. The integration of high electrical conductivity and flexible buckypaper (oxidized Multi-walled carbon nanotubes (MWCNTs) film) and high theoretical capacity silicon materials are effective for obtaining superior high-energy-density and flexible electrode materials. Therefore, this study focuses on improving the high-capacity, capability-cycling stability of the thin-film Si buckypaper free-standing electrodes for lightweight and flexible energy-supply devices. First, buckypaper (oxidized MWCNTs) was prepared by assembling a free stand-alone electrode, and electrical conductivity tests confirmed that the buckypaper has sufficient electrical conductivity (10⁻⁴(S m⁻¹) in LIBs) to operate simultaneously with a current collector. Subsequently, silicon was deposited on the buckypaper via magnetron sputtering. Next, the thin-film Si buckypaper freestanding electrodes were heat-treated at 600 °C in a vacuum, which improved their electrochemical performance significantly. Electrochemical results demonstrated that the electrode capacity can be increased by 27/26 and 95/93 μAh in unheated and heated buckypaper current collectors, respectively. The measured discharge/charge capacities of the USi_HBP electrode were 108/106 μAh after 100 cycles, corresponding to a Coulombic efficiency of 98.1%, whereas the HSi_HBP electrode indicated a discharge/charge capacity of 193/192 μAh at the 100th cycle, corresponding to a capacity retention of 99.5%. In particular, the HSi_HBP electrode can decrease the capacity by less than 1.5% compared with the value of the first cycle after 100 cycles, demonstrating excellent electrochemical stability.

Lithium-ion batteries (LIBs) have been used in many fields, such as consumer electronics and automotive and grid storage, and its applications continue to expand. Several studies have attempted to improve the performance of LIBs. In particular, the use of high-capacity silicon and tin as anodes has been widely studied. Although anodes composed of silicone and tin have high theoretical capacities, poor electrical conductivity and considerable volume expansion of such anodes deteriorate the LIB performance. Thus, Li₄Ti₅O₁₂ (LTO), a zero-strain material, has attracted much attention with high cycle stability and rate capability through improved electrical conductivity. However, LTO has the disadvantages of a low electrical conductivity (10⁻⁸ to 10⁻¹³ S cm⁻¹) and moderate Li+ ion diffusion coefficient (10⁻⁹ to 10⁻¹⁶ cm² s⁻¹). In this study, the flexible and free-standing composite films were fabricated using only LTO and multi-walled carbon nanotube(CNT) with high electrical conductivity and ion diffusivity. The prepared LTO/CNT films showed a higher charge/discharge capacity than the theoretical capacity of the LTO electrode.