This paper exhibits a thorough review of the use of impedimetric sensors for the analysis of food quality. It helps to understand the contribution of some of the major types of impedimetric sensors that are used for this application. The deployment of impedimetric sensing prototypes has been advantageous due to their wide linear range of responses, detection of the target analyte at low concentrations, good stability, high accuracy and high reproducibility in the results. The choice of these sensors was classified on the basis of structure and the conductive material used to develop them. The first category included the use of nanomaterials such as graphene and metallic nanowires used to form the sensing devices. Different forms of graphene nanoparticles, such as nano-hybrids, nanosheets, and nano-powders, have been largely used to sense biomolecules in the micro-molar range. The use of conductive materials such as gold, copper, tungsten and tin to develop nanowire-based prototypes for the inspection of food quality has also been shown. The second category was based on conventional electromechanical circuits such as electronic noses and other smart systems. Within this sector, the standardized systems, such as electronic noses, and LC circuit -based systems have been explained. Finally, some of the challenges posed by the existing sensors have been listed out, along with an estimate of the increase in the number of sensors employed to assess food quality.

A two‐step process of enzymatic hydrolyzation followed by Maillard reaction was used to produce oyster meat hydrolysate Maillard reaction products (MRPs). The flavor of oyster meat hydrolysate MRPs was significantly improved through an optimized orthogonal experimental design. Comparisons between the antioxidative activities of oyster meat hydrolysates and their MRPs were made using lipid peroxidation inhabitation, hydroxyl radical scavenging radical activity, and radical scavenging activity of 2,2 diphenyl‐1‐picrylhydrazyl (DPPH). These methods indicated that an improvement of Maillard reaction on the oyster meat hydrolysates antioxidative activity. Gas chromatography‐mass spectrometry illustrated that the increase was due to the newly formed antioxidative compounds after Maillard reaction, mainly of acids from 22.45% to 37.77% and phenols from 0% to 9.88%.

Lychee pericarp is rich in phenolic and has good antioxidant activity. The effects of simulated gastric (SGF) and intestinal fluid (SIF) digestion on the contents, composition, and antioxidant activities of the phenolic substances in the pericarp of different lychee cultivars (cv Jizui, Lizhiwang, Guiwei, Yuhe, Nuomici and Guihong) were investigated. Compared with distilled water (DW) treatment, the total phenolic content (TPC) and total flavonoid content (TFC) in the pericarp of different lychee cultivars decreased after SGF digestion; especially, the TFC in “Lizhiwang” decreased by 41.5%. The TPC and TFC of lychee pericarp also decreased after SIF digestion. However, the TPC in “Jizui”, “Guiwei” and “Yuhe” increased. The SGF and SIF also had different effects on the FRAP and ABTS antioxidant activities of different lychee cultivars. The SGF digestion decreased the ABTS antioxidant capacity of lychee pericarp but enhanced the FRAP value of some lychee cultivars. However, the SIF digestion decreased the FRAP antioxidant activity of different lychee cultivar pericarps but enhanced the ABTS antioxidant capacity of lychee. The HPLC results showed that lychee pericarp had relatively high contents of procyanidin B2 and procyanidin A2. After SIF digestion, caffeic acid and isoquercitrin could not be detected in any of the lychee varieties. However, quercetin-3-rutinose-7-rhamnoside and isoquercitrin were increased after SGF digestion. Lychee pericarp could be used as an inexpensive functional food ingredient.

This paper represents the design, fabrication, and implementation of an Internet of Things (IoT)-based electrochemical microfluidic system for free calcium concentration detection with a 3D printing technique. Free calcium solutions with desired concentrations between 0 and 40 µM can be obtained. The solutions were used to calibrate the system by using an impedance analyzer for monitoring the impedance change to determine the operating frequency. Continuously, an IoT enabled point of care device was used for real-time detection and to send signals to the cloud for sharing. The relationship between the concentration and reactance are $\mathrm{y}=-1.3812\mathrm{Lgx}+0.9809$ at a wavelength of 450 Hz, with an R² of 0.9719. We measured the calcium concentration changing from 39.8 µM to 1.35 µM (nearly real-time) by the PoC device and showed the concentration changes resulting with time on the cell phone app. The results depicted in this paper provide a strong platform for the precise and real-time monitoring of different biomedical samples.