Light-trapping structures are more demanding for optimal light absorption in thin film silicon solar cells. Accordingly, new design engineering of solar cells has been emphasized and found to be effective to achieve improved performance. This paper deals with a design of thin film silicon solar cells and explores the influence of bottom grating and combination of top and bottom (dual) grating as a part of back reflector with a distributed Bragg reflector (DBR). Use of metal layer as a part of back reflector has found to be promising for minimum requirement of DBR pairs. The effect of grating and anti-reflection coating thicknesses are also investigated for absorption enhancement. With optimization, high performance has been achieved from dual grating-based solar cell with a relative enhancement in short-circuit current approximately 68% while it was approximately 55% in case of bottom grating-based solar cell. Our designing efforts show enhanced absorption of light in UV and infrared part of solar spectrum.
Thin film solar cells are cheaper but having low absorption in longer wavelength and hence, an effective light trapping mechanism is essential. In this work, we proposed an ultrathin crystalline silicon solar cell which showed extraordinary performance due to enhanced light absorption in visible and infrared part of solar spectrum. Various designing parameters such as number of distributed Bragg reflector (DBR) pairs, anti-reflection layer thickness, grating thickness, active layer thickness, grating duty cycle and period were optimized for the optimal performance of solar cell. An ultrathin silicon solar cell with 40 nm active layer could produce an enhancement in cell efficiency ∼15 % and current density ∼23 mA/cm2. This design approach would be useful for the realization of new generation of solar cells with reduced active layer thickness.
29 September 2021 in International Journal of Energy Research
The photonic and plasmonic nanostructures are highly feasible for enhanced light trapping mechanisms. These nanostructures hold great promises for better photovoltaic performance by yielding the highest light-harvesting photons within the few nanometer absorber regions. The shed light on the nano-scaled structures (thin films and nanogratings) is responsible for the highest scattering mechanism with the omnidirectional diffraction angles and enhanced life time of the photons. In this research work, we have focused on improved ultrathin film amorphous silicon (a-Si) solar cell performance, which was integrated by top-SiO2 and bottom-Ag nanogratings as a backside reflector by using rigorous coupled-wave analysis method. The SiO2 antireflection coating, nanogratings, and absorber (a-Si) layer thicknesses were optimized for better photovoltaic performance. With the influence of optimization parameters, the highest current density of 27.03 and 33.53 mA/cm2 were obtained from transverse electric and transverse magnetic polarization conditions due to the surface guided-mode, Fabry–Perot resonance, surface excitation, localized fields, and surface plasmon polariton modes.
27 February 2019 in Nanosystems: Physics, Chemistry, Mathematics
Anelectrochemical deposition and sol-gel spin coating processes were employed for the preparation of ZnO nanostructure on zinc doped TiO2 (Zn-TiO2) thin film on the fluorine doped tin-oxide (FTO) substrate.