Yun-Zhuo Zhang

Mr. Yun-Zhuo Zhang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2023 in Crystals
Verified
Journal Article
Open access
PDF file
YWYuhao Wang
Yuhao Wang
CJChong Jing
Chong Jing
ZDZhao-Ying Ding
Zhao-Ying Ding
YZYun-Zhuo Zhang
Yun-Zhuo Zhang
TWTao Wei
Tao Wei
YWYaming Wang
Yaming Wang
Since the beginning of the use of nuclear energy, humans have been faced with the problem of radionuclide disposal. At present, a large amount of waste is stored in pools or dry tanks at reactor sites. With the development of the nuclear power generation industry worldwide, the high storage cost (including building, maintaining, and operating storage pools) is overwhelming and serious, and urgent radionuclide disposal problems have become increasingly difficult. Safe and economical strategies are urgently needed for long-term storage and disposal of nuclear waste, which has become among the core issues in the utilization of nuclear energy. Pyrochlore ceramics are able to immobilize a variety of radionuclides and have excellent irradiation stability, so they have received extensive attention as hosts of radionuclides waste. This review summarizes the structure, composition, synthesis process, properties, and irradiation stability of pyrochlore ceramics, focusing on the ion irradiation effect of pyrochlore. In general, the cation radii ratio rA/rB is a key parameter related to various properties of pyrochlores. Zirconate pyrochlore is more easily transformed from pyrochlore to defective fluorite, and leads to better irradiation resistance.

23 May 2025 in Materials
Verified
Journal Article
Open access
PDF file
JZJia-Jun Zhao
Jia-Jun Zhao
YZYun-Zhuo Zhang
Yun-Zhuo Zhang
JLJia-Hao Li
Jia-Hao Li
ZWZiheng Wang
Ziheng Wang
WMWei-Jian Miao
Wei-Jian Miao
Jia-Hu OuyangJia-Hu Ouyang
Jia-Hu Ouyang
Alumina is a polycrystalline oxide ceramic with different structures. Currently, α-alumina with a hexagonal close-packed stacking structure is mainly used for a variety of industrial applications. Alumina-based ceramics and composites have been widely used in various fields due to their excellent hardness, strength, creep resistance and good biocompatibility. However, it is difficult for Al2O3 ceramic components based on traditional preparation methods to meet the increasing industrial requirements, especially for applications such as precise multi-walled complex structures. Al2O3 ceramic additive manufacturing by vat photopolymerization 3D printing stands out owing to its ability to produce complex structures and tailored shaping accuracy/properties. The vat photopolymerization 3D printing of Al2O3 ceramics requires multiple steps including slurry preparation, photopolymerization shaping, debinding and sintering. Therefore, many efforts mainly focus on the strategies of optimizing the ceramic slurry formulation and the debinding/sintering process. This paper provides a scoping review to present optimization strategies for the above aspects of vat photopolymerization 3D printing, which creates a strong reference for researchers to improve the accuracy and properties of alumina parts. Finally, this review also states the main applications of Al2O3 ceramic components based on vat photopolymerization, and highlights the opportunities and challenges associated with this technology in the future. It is beneficial to understanding the future trends and policy directions of advanced manufacturing industry.

18 August 2025 in Surfaces
Verified
Journal Article
Open access
PDF file
JLJia-Hao Li
Jia-Hao Li
YZYun-Zhuo Zhang
Yun-Zhuo Zhang
JZJia-Jun Zhao
Jia-Jun Zhao
ZWZiheng Wang
Ziheng Wang
WMWei-Jian Miao
Wei-Jian Miao
YZYongchun Zou
Yongchun Zou
Zirconia (ZrO2) ceramics and composites have attracted much attention in aerospace, biomedical and energy fields due to their high hardness, high wear resistance, excellent chemical stability and biocompatibility. However, the brittleness of ceramics and the high cost of molds have made it difficult for traditional processing techniques to manufacture complex structural and functional components efficiently. Additive manufacturing technology has successfully overcome these challenges by optimizing the preparation process and improving production efficiency. Among them, vat photopolymeriztion (VPP) has been demonstrated to offer distinct advantages, including high precision, high efficiency and low cost. It provides a novel approach to the preparation of zirconia ceramics. VPP preparation of zirconia ceramics and composites needs to consider various steps such as slurry preparation, structural design and printing, debinding and sintering. This review introduces common VPP technologies related to zirconia ceramics and summarizes the factors affecting the rheological and curing properties of zirconia slurry, in order to provide researchers with a reference for studying VPP preparation of zirconia. The current optimization methods for light-curing zirconia slurry formulations are focused on, and common methods for surface modification and optimization of slurry composition and solid loading are introduced. The influencing factors of the printing process are summarized, and the current research on surface texturing of VPP preparation and the influence of printing parameters on the performance and accuracy of the components are introduced. The effects of debinding/sintering processes on cured zirconia ceramics are also summarized. The applications of VPP zirconia ceramics and composites are proposed, especially for their use in biomedical and energy applications.

27 August 2025 in Materials
Verified
Journal Article
Open access
PDF file
YZYun-Zhuo Zhang
Yun-Zhuo Zhang
ZWZiheng Wang
Ziheng Wang
WMWei-Jian Miao
Wei-Jian Miao
FWFan-bin Wu
Fan-bin Wu
SWShu-Qi Wang
Shu-Qi Wang
YZYongchun Zou
Yongchun Zou
Thermal debinding represents a critical step that determines the overall success or failure in ceramic vat photopolymerization manufacturing (ceramic VPP), which involves the pyrolysis and subsequent removal of resin (binder). Despite its importance, research into the underlying mechanisms of resin pyrolysis has been largely overlooked. In this study, the multi-distribution activation energy model (M-DAEM) with the pattern-search method and local search algorithms and thermogravimetric data were employed to obtain the kinetic parameters of the resin cross-linked network in printed Si3N4 green bodies containing monomers with different functionalities, including HEA, HDDA, and PPTTA. High-quality global fitting results were achieved with R2 values exceeding 0.9999 across all samples. The kinetics model was further utilized for the numerical analysis of the gas pressure inside the green body during the debinding process. This study indicates that monofunctional monomers can effectively reduce the activation energy of the primary pseudo-components, enabling pyrolysis to occur at a lower temperature and a lower rate, suppressing the peak value of gas pressure, and promoting high-quality debinding of the green body. This study can provide a reference for optimizing the resin formulation in ceramic VPP from the perspective of enhancing debinding performance.

7 October 2026 in Lubricants
Verified
Journal Article
Open access
PDF file
WSWei-Min Shao
Wei-Min Shao
YZYun-Zhuo Zhang
Yun-Zhuo Zhang
SWShu-Qi Wang
Shu-Qi Wang
JLJia-Hao Li
Jia-Hao Li
JZJia-Jun Zhao
Jia-Jun Zhao
Jia-Hu OuyangJia-Hu Ouyang
Jia-Hu Ouyang
Additive manufacturing enables ceramic–metal interpenetrating phase composites (IPCs) with designed load paths, but their tribological performance is constrained by coupled infiltration, interfacial damage, and lubrication processes. This review critically evaluates these constraints through an architecture–infiltration–interface–performance framework. Unlike conventional particle-reinforced metal matrix composites, IPCs require both phases to form three-dimensionally continuous networks; successful infiltration additionally requires preservation of the ceramic skeleton, adequate filling of the intended metal channels, and interfaces capable of transferring load. The central mechanical trade-off is between ceramic load support and accommodation of incompatible phase deformation. Thermal-expansion mismatch (Δα) generates residual stresses during post-infiltration cooling, while cyclic frictional heating superimposes spatially nonuniform thermal stresses that can promote interfacial microcracking and delamination. Increasing ceramic content or refining load paths must therefore be assessed against the remaining metal-ligament capacity for plastic accommodation and crack bridging, rather than hardness alone. Lubrication introduces a second trade-off: sufficient lubricant delivery can shift sliding from direct asperity contact toward tribofilm-mediated shear, whereas excessive lubricant content or reservoir porosity can weaken structural continuity and increase wear despite low friction. Sustained protection requires lubricant supply and film formation to offset depletion and removal. Current evidence does not establish universal optimal phase fractions or topology rankings, because direct, matched tribological studies of printed and subsequently infiltrated IPCs remain scarce. Quantitative design therefore requires joint characterization of phase connectivity, infiltration defects, residual and cyclic thermal stresses, interfacial fracture resistance, and tribofilm persistence under specified contact conditions.

16 October 2026 in Materials
Verified
Journal Article
Open access
PDF file
WSWei-Min Shao
Wei-Min Shao
YZYun-Zhuo Zhang
Yun-Zhuo Zhang
SWShu-Qi Wang
Shu-Qi Wang
JLJia-Hao Li
Jia-Hao Li
JZJia-Jun Zhao
Jia-Jun Zhao
Jia-Hu OuyangJia-Hu Ouyang
Jia-Hu Ouyang
Two-dimensional (2D) materials offer opportunities for constructing functional devices; however, integrating them into macroscopic structures requires precise control over nanosheet dispersion, processing parameters, and structural design. This review summarizes research on the fabrication of 3D structures using nanosheet-based inks and composite feedstocks—including graphene and its derivatives, MXenes, transition metal dichalcogenides, hexagonal boron nitride, and black phosphorus. Studies indicate that material performance is determined by the combined effects of feedstock composition, printing conditions, structural design, and post-processing techniques. Direct Ink Writing (DIW) is a particularly suitable fabrication technique for various porous lattices and self-supporting structures where nanosheets form the primary functional network. High-concentration aqueous MXene inks and rheologically tuned graphene oxide-based inks serve as typical feedstocks, provided they exhibit favorable shear-thinning behavior, shape retention, and structural recovery capabilities. Regarding polymer-based composite components, Fused Deposition Modeling (FDM) is applicable to thermoplastic feedstocks loaded with 2D materials, whereas Stereolithography (SLA) and Digital Light Processing (DLP) utilize nanosheet-loaded photocurable resins to fabricate composites with intricate features, albeit with applications constrained by light attenuation and curing characteristics. Applications in sensing, energy storage devices, and biomedical scaffolds demonstrate the immense potential of these methods, while printed optoelectronic devices are discussed as a complementary case of device integration. Nevertheless, challenges such as material instability, trade-offs between resolution and scale, post-processing shrinkage, and incomplete biosafety assessments remain significant barriers to practical application, highlighting the need to develop reproducible processing techniques and conduct validation studies focused on real-world use.