Additive manufacturing technology has the advantages of precise manufacturing, high levels of customization, and large-scale molding; it can achieve the design of complex geometric structures and structural/functional integrated components, which is difficult to realize using traditional manufacturing technology, especially for different tribological applications. Ceramic materials are widely used in industries such as high-end manufacturing in aviation, aerospace, energy, and biomedicine due to their excellent wear resistance, high temperature stability, and hardness. The tribological properties of ceramic parts determine their versatility and durability during the application process. The rise of additive manufacturing technology in the field of ceramics has opened up the possibility of creating ceramics with excellent friction and wear properties and overcoming the limitations of traditional manufacturing processes. Although several studies on 3D printing of wear-resistant/self-lubricating metal- or polymer-based parts have been published, there has until now been no comprehensive review of additive manufacturing of advanced structural ceramics and composites for the purpose of reducing friction and enhancing wear-resistant properties. This article discusses the currently used ceramic additive manufacturing technology and processes, the ceramic materials used in the field of tribology, and how the combination of these two can improve the tribological properties of ceramic components from the perspective of micro- and macrostructures. Finally, specific tribological applications of additively manufactured ceramics in various industrial and biomedical fields are also introduced.
Alumina is a polycrystalline oxide ceramic with different structures. Currently, α-alumina with a hexagonal close-packed stacking structure is mainly used for a variety of industrial applications. Alumina-based ceramics and composites have been widely used in various fields due to their excellent hardness, strength, creep resistance and good biocompatibility. However, it is difficult for Al2O3 ceramic components based on traditional preparation methods to meet the increasing industrial requirements, especially for applications such as precise multi-walled complex structures. Al2O3 ceramic additive manufacturing by vat photopolymerization 3D printing stands out owing to its ability to produce complex structures and tailored shaping accuracy/properties. The vat photopolymerization 3D printing of Al2O3 ceramics requires multiple steps including slurry preparation, photopolymerization shaping, debinding and sintering. Therefore, many efforts mainly focus on the strategies of optimizing the ceramic slurry formulation and the debinding/sintering process. This paper provides a scoping review to present optimization strategies for the above aspects of vat photopolymerization 3D printing, which creates a strong reference for researchers to improve the accuracy and properties of alumina parts. Finally, this review also states the main applications of Al2O3 ceramic components based on vat photopolymerization, and highlights the opportunities and challenges associated with this technology in the future. It is beneficial to understanding the future trends and policy directions of advanced manufacturing industry.
Si3N4 ceramics and composites stand out for their exceptional mechanical and thermal properties. Compared with conventional ceramic forming processes, 3D printing via vat photopolymerization not only ensures high geometric precision but also improves the forming efficiency and strength of green body. Nevertheless, the grayish appearance of Si3N4 and its relatively high refractive index can adversely affect the photocuring behavior in ceramic slurries. The primary objectives focus on enhancing the curing performance and rheological properties of slurries, minimizing defects during post-processing, and improving the relative density and mechanical properties of Si3N4 ceramics. Key advancements include slurry optimization via refractive index matching, biomodal particle gradation and surface modification, while the integration of whisker/fiber additions or polymer-derived ceramic strategies enhances mechanical properties. In addition, controlling the atmosphere and heating rate of the post-processing innovations can achieve a relative density of more than 95%. This paper introduces the mechanisms of vat photopolymerization and then summarizes the strategies for improving Si3N4 ceramic slurries as well as controlling the printing and debinding/sintering processes. It further highlights the ways in which different approaches can be used to enhance the properties of Si3N4 slurries and ceramic parts. Finally, applications of Si3N4 ceramics and composites via vat photopolymerization in various fields such as aviation, aerospace, energy, electronics, chemical processes, and biomedical implants are also presented to point out future opportunities and challenges.
Zirconia (ZrO2) ceramics and composites have attracted much attention in aerospace, biomedical and energy fields due to their high hardness, high wear resistance, excellent chemical stability and biocompatibility. However, the brittleness of ceramics and the high cost of molds have made it difficult for traditional processing techniques to manufacture complex structural and functional components efficiently. Additive manufacturing technology has successfully overcome these challenges by optimizing the preparation process and improving production efficiency. Among them, vat photopolymeriztion (VPP) has been demonstrated to offer distinct advantages, including high precision, high efficiency and low cost. It provides a novel approach to the preparation of zirconia ceramics. VPP preparation of zirconia ceramics and composites needs to consider various steps such as slurry preparation, structural design and printing, debinding and sintering. This review introduces common VPP technologies related to zirconia ceramics and summarizes the factors affecting the rheological and curing properties of zirconia slurry, in order to provide researchers with a reference for studying VPP preparation of zirconia. The current optimization methods for light-curing zirconia slurry formulations are focused on, and common methods for surface modification and optimization of slurry composition and solid loading are introduced. The influencing factors of the printing process are summarized, and the current research on surface texturing of VPP preparation and the influence of printing parameters on the performance and accuracy of the components are introduced. The effects of debinding/sintering processes on cured zirconia ceramics are also summarized. The applications of VPP zirconia ceramics and composites are proposed, especially for their use in biomedical and energy applications.
Thermal debinding represents a critical step that determines the overall success or failure in ceramic vat photopolymerization manufacturing (ceramic VPP), which involves the pyrolysis and subsequent removal of resin (binder). Despite its importance, research into the underlying mechanisms of resin pyrolysis has been largely overlooked. In this study, the multi-distribution activation energy model (M-DAEM) with the pattern-search method and local search algorithms and thermogravimetric data were employed to obtain the kinetic parameters of the resin cross-linked network in printed Si3N4 green bodies containing monomers with different functionalities, including HEA, HDDA, and PPTTA. High-quality global fitting results were achieved with R2 values exceeding 0.9999 across all samples. The kinetics model was further utilized for the numerical analysis of the gas pressure inside the green body during the debinding process. This study indicates that monofunctional monomers can effectively reduce the activation energy of the primary pseudo-components, enabling pyrolysis to occur at a lower temperature and a lower rate, suppressing the peak value of gas pressure, and promoting high-quality debinding of the green body. This study can provide a reference for optimizing the resin formulation in ceramic VPP from the perspective of enhancing debinding performance.