The extensive use of herbicide 2-methyl-4-chlorophenoxyacetic acid (MCPA), coupled with its limited biodegradability, has led to its ubiquitous presence in aquatic environments. This work investigates the removal of MCPA (100 mg/L) in the aqueous phase via solar photo-Fenton. The process was carried out in a 700 mL reactor using a Xe lamp that simulates solar radiation (λ: 250–700 nm). A parametric study was conducted to assess the influence of dissolved O2 on the reaction medium, Fe2+ dosage, H2O2 concentration and pH0. The results indicate that dissolved O2 boosts pollutant mineralization, even working at sub-stoichiometric H2O2 concentrations. Under optimal reaction conditions ([Fe2+]: 7.5 mg/L, [H2O2]0: 322 mg/L (stoichiometric dose), pH0: 3.5), the MCPA reached almost complete mineralization (XTOC: 98.40%) in 180 min. Phytotoxicity and ecotoxicity assessments of treated effluents revealed that even working at sub-stoichiometric H2O2 dosages, toxicity decreases with the solar photo-Fenton treatment. Finally, the solar photo-Fenton process was evaluated in relevant matrices (river water and WWTP secondary effluent) and a realistic pollutant concentration (100 µg/L). In all cases, the pollutant degradation was ≥70% in 60 min, demonstrating the potential of this technology as a tertiary treatment.
Monometallic Ni catalysts supported on zeolites may undergo deactivation through carbon deposition and particle growth during hydrotreating. In this study, FeNi catalysts supported on modified natural mordenite (MO), with total metal loadings of 20–40 wt.%, were prepared by co-deposition–precipitation and evaluated for biodiesel conversion to green diesel. XRD and TEM analyses showed that Fe incorporation was associated with smaller Ni crystallites and a narrower particle size distribution compared with the monometallic 30Ni/MO reference. NH3-TPD measurements indicated changes in ammonia desorption behavior, particularly a reduced high-temperature contribution, while CO chemisorption revealed the highest uptake (137.5 μmol g−1) for 30FeNi/MO. Under the investigated conditions (310 °C, 40 bar H2, 9 h), this catalyst achieved approximately 99% biodiesel conversion and a 97 wt.% diesel-range hydrocarbon fraction. The product carbon-number distribution suggested a greater relative contribution of carbon-removing deoxygenation pathways following Fe incorporation, although definitive mechanistic assignments require additional evidence. Reusability tests revealed substantial deterioration in hydrocarbon production upon direct reuse. Washing and re-activation restored nearly complete biodiesel conversion but only partially recovered hydrocarbon production (66 wt.%). These findings demonstrate promising initial catalytic performance while highlighting limitations in catalyst stability and regeneration.