100 nm thick TiO2/TiN bilayers with varying thickness ratios were deposited via reactive sputtering of a Ti target in controlled oxygen and nitrogen atmospheres. Post-deposition annealing in air at 600 °C was performed to induce nitrogen diffusion through the oxygen-deficient TiO2 layer. The resulting changes in morphology and chemical environment were investigated in detail using transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and UV-Vis spectroscopy. Detailed TEM and XPS analyses have confirmed nitrogen diffusion across the TiO2 layer, with surface nitrogen concentration and the ratio of interstitial to substitutional nitrogen dependent on the TiO2/TiN mass ratio. Optical studies demonstrated modifications in optical constants and a reduction of the effective bandgap from 3.2 eV to 2.6 eV due to new energy states introduced by nitrogen doping. Changes in surface free energy induced by nitrogen incorporation showed a correlation to nitrogen doping sites on the surface, which had positive effects on overall photocatalytic activity. Photocatalytic activity, assessed through methylene blue degradation, showed enhancement attributed to nitrogen doping. Additionally, deposition of a 5 nm gold layer on the annealed sample enabled investigation of synergistic effects between nitrogen doping and gold incorporation, resulting in further improved photocatalytic performance. These findings establish the TiO2/TiN bilayer as a versatile platform for supporting thin gold films with enhanced photocatalytic properties.
Local lattice distortion (LLD) arising from atomic size mismatch is an important structural feature of body-centered cubic (BCC) refractory high-entropy alloys (RHEAs). Reported LLDs are often difficult to compare across alloys because studies use different definitions and reference lattices. In this paper, we computed a consistent static DFT baseline for width-based LLD descriptors for three equimolar quaternary BCC RHEAs: NbTaTiV, TiZrNbMo, and the sparsely reported HfZrNbMo. The alloys were modeled as 128-atom special quasi-random structures and fully relaxed using density functional theory (DFT). Two complementary descriptors were evaluated from the relaxed geometries using a consistently defined reference lattice: a displacement-based metric derived from atomic off-site displacements and a shell-resolved bond length broadening metric for the first and second coordination shells. The resulting LLD descriptors have the lowest values for NbTaTiV, intermediate values for TiZrNbMo, and the highest for HfZrNbMo. Element-resolved analysis shows that individual species contribute differently to the overall distortion, information that is not captured by global descriptors alone. The pretrained MACE machine learning interatomic potential is assessed as a pre-relaxation step prior to DFT relaxation, as well as for screening candidate lattice parameters for HfZrNbMo.