Gas extraction is an important means to reduce coalbed gas and ensure safe coal production. Injecting N2/CO2 into a coalbed can enhance coal seam gas extraction, but problems with N2/CO2 sources underground have prevented the wide application of this technology in coal mines. The air contains a large amount of N2, but only a few studies have investigated the injection of air into coalbeds to facilitate gas extraction. In this study, a thermal–hydraulic–solid coupling model for air-enhanced coalbed gas extraction (Air-ECGE) was established. Additionally, the impact of air injection on coalbed methane extraction was simulated, and field experiments were conducted on air injection to enhance gas extraction. The results showed that injecting high-pressure air into a coalbed can effectively facilitate gas desorption and gas migration within the coalbed, greatly improving the efficiency of gas extraction in the coalbed. In addition, owing to the large pressure gradient that can lead to fast coalbed gas seepage, the gas production rate of the extraction borehole is directly proportional to the gas injection pressure. Further, the spacing of the boreholes limits the influence range of the gas injection: the larger the spacing, the larger the influence range, and the higher the gas extraction rate of the extraction borehole. After injecting air into the coalbed of the Liuzhuang coal mine, the extraction flow rate and concentration of gas from the extraction boreholes both increased significantly. A certain delay effect was also observed in the gas injection effect, and the gas extraction flow rate only decreased after a period of time after the gas injection had stopped.
Variable-flow displacement has been effectively used to enhance oil recovery; however, it has rarely been investigated for coalbed methane production, and the CH4 diffusion laws in this process are not clear. In this paper, we carried out a study on the CH4 diffusion law in the bidirectional diffusion process displaced by variable-flow gas injection. The emission and desorption quantity of CH4 under variable-flow gas injection, the displacement effect under the principle of equal time and quantity, and the applicability of the CH4 diffusion model for the bidirectional diffusion process were analyzed. The results indicate that the variable-flow injection modes emit more CH4 compared to constant flow injection. The CH4 emission and desorption quantities for each injection mode are as follows: step-changed > sinusoidal-changed > constant flow. Secondly, the order of CH4 emission and desorption quantity in each gas injection mode is as follows: step-changed > sinusoidal-changed > constant flow. When CO2 is the injection gas source, the outlet CH4 emission and desorption quantity are larger than N2 injection. Thirdly, through the analysis of the principle of equal time and equal quantity, the variable-flow injection modes consume less gas for each volume of emitted CH4, resulting in a more effective displacement. Finally, the diffusion fitting effect of the bidisperse model for CH4 in the bidirectional diffusion process is better than that of the unipore model, and the bidisperse diffusion model can better fit the mt/m∞ curve of CH4 diffusion during the variable-flow gas injection replacement process.